ページ1に含まれる内容の要旨
Contents
Introduction.............................................. 2
Digital Surround System
Connections........................................... 16
HTX-22HD
Instruction Manual
Turning On & First Time Setup ............. 30
Basic Operation
Playing your AV components .................. 39
Thank you for purchasing this Onkyo product. Please
read this manual thoroughly before making any con-
Using the Listening Modes................... 42
nections or plugging in your new Onky
ページ2に含まれる内容の要旨
WARNING: WARNING AVIS TO REDUCE THE RISK OF FIRE OR ELECTRIC RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the CAUTION: presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient TO REDUCE THE RISK OF ELECTRIC SHOCK, magnitude to constitute a r
ページ3に含まれる内容の要旨
Precautions 1. Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse—The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care—Occasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the unit imm
ページ4に含まれる内容の要旨
Precautions—Continued For British models Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured mark- ings identifying the terminals in your plug, proceed as follows: The wire which
ページ5に含まれる内容の要旨
Speaker Precautions Placement Input Signal Warning • The subwoofer cabinet is made out of wood The speakers can handle the specified input and is therefore sensitive to extreme tem- power when used for normal music reproduc- peratures and humidity, do not put it in loca- tion. If any of the following signals are fed to tions subject to direct sunlight or in humid them, even if the input power is within the places, such as near an air conditioner, specified rating,
ページ6に含まれる内容の要旨
Supplied Accessories Make sure you have the following accessories: Optical digital audio cable (5 ft., 1.5 m) HTX-22HDPAW Amp/Subwoofer Cork spacers for the Amp/Subwoofer (x4) HTX-22HDST Front Speakers Cork spacers for the front speakers (x8) * In catalogs and on packaging, the letter at the end of Remote controller and two batteries (AA/R6) the product name indicates the color. Specifications and operation are the same regardless of color. Speaker setup microphone Red and wh
ページ7に含まれる内容の要旨
Contents Important Safety Instructions .....................2 Using the Listening Modes .......................42 Selecting the Listening Modes .................42 Precautions...................................................3 Listening Modes Available Speaker Precautions....................................5 for Each Source Format.........................43 Supplied Accessories..................................6 About the Listening Modes.......................49 F
ページ8に含まれる内容の要旨
Features HTX-22HDPAW: 5.1-channel Amp/Subwoofer 5.1-channel power amplifier with built-in subwoofer *1 •2 HDMI inputs, 1 output (with support for up to 1080p, Deep Color, x.v.Color, Lip Sync, *2 *3 DTS-HD Master Audio , DTS-HD High Resolution Audio, Dolby TrueHD , Dolby Digital Plus, SACD, and multichannel PCM) •2 optical inputs, 1 coaxial input •2 analog inputs • Pre out for surround backs speakers • Onkyo RIHD system control over HDMI • VLSC (Vector Linear Shaping
ページ9に含まれる内容の要旨
Features—Continued *1 HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. *2. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved. Manufa
ページ10に含まれる内容の要旨
Getting to Know the HTX-22HD Front Panel 14 5 2 6 3 7 A Display G LISTENING MODE button See “Display” on page 11. Selects the listening modes. B STANDBY indicator Lights up when the HTX-22HD is on Standby and flashes while a signal is being received from the remote controller. C ON/STANDBY button Sets the HTX-22HD to On or Standby. To operate this button, push it down from the top. D Remote-control sensor Receives control signals from the remote controller. E
ページ11に含まれる内容の要旨
Getting to Know the HTX-22HD—Continued Display 1 23 4 5 1 Listening mode and format indicators Show the selected listening mode and audio input signal format. Listening mode/input Indicator format PCM PCM D Dolby Digital DTS D+ Dolby Digital Plus HD Dolby TrueHD EXP DTS Express Audio HD HR DTS-HD High Resolution Audio HD MSTR DTS-HD Master Audio DTS Direct Stream Digital T-D Theater-Dimensional 2 AUDYSSEY indicator Flashes during automa
ページ12に含まれる内容の要旨
Getting to Know the HTX-22HD—Continued Rear Panel 1 2 6 7 3 8 4 9 5 J A HDMI IN 1, 2, and OUT C COAXIAL DIGITAL IN HDMI (High Definition Multimedia This coaxial digital audio input is for con- Interface) connections carry digital audio necting a component with a coaxial digi- and digital video. tal audio output, such as a CD player or DVD player. The HDMI inputs are for connecting components with an HDMI output, such D OPTICAL DIGITAL IN 1 and 2 as a DVD player, DV
ページ13に含まれる内容の要旨
Getting to Know the HTX-22HD—Continued F AC INLET The supplied power cord is connected here. The other end of the power cord should be connected to a suitable wall outlet. G FRONT SPEAKERS, CENTER SPEAKER, and SURROUND SPEAKERS These push terminals are for connecting the included front speakers and the optional SKS-11 center speaker and sur- round speakers. H Cooling fan This cooling fan operates when the inter- nal temperature of the HTX-22HD reaches a certain
ページ14に含まれる内容の要旨
Remote Controller Installing the Batteries Aiming the Remote Controller When using the remote controller, point it Open the battery compartment, as toward the HTX-22HD’s remote control sen- 1 shown. sor, as shown below. Remote control sensor STANDBY indicator Approx. 16 ft. (5 m) 30˚ Insert the two supplied batteries (AA/ 2 30˚ R6) in accordance with the polarity diagram inside the battery compart- ment. HTX-22HDPAW Notes: • The remote controller may not work reli- ab
ページ15に含まれる内容の要旨
Remote Controller—Continued Using the Remote Controller These buttons are used to control the HTX-22HD. E Arrow [ ]/[ ]/[ ]/[ ] and ENTER buttons 1 Used to select and adjust settings. 2 8 F VOLUME [ ]/[ ] buttons Adjust the volume of the HTX-22HD. 3 9 G LISTENING MODE buttons 4 J Used to select the listening modes. K 5 H DIMMER button L Adjusts the display brightness. M I TEST TONE button 6 Used with the Test Tone function. J DISPLAY butt
ページ16に含まれる内容の要旨
Connecting the Speakers Enjoying Home Theater Thanks to the HTX-22HD’s superb capabilities, you can enjoy surround sound with a real sense of movement in your own home—just like being in a movie theater or concert hall. You can enjoy DVDs featuring Dolby Digital or DTS. With analog or digital TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo’s original DSP listening modes. Speaker positions for a 7.1-channel system are shown below. Front left and right speakers (HTX-22H
ページ17に含まれる内容の要旨
Connecting the Speakers—Continued Affixing the Cork Spacers You can improve the sound quality by affixing the included cork spacers to raise the speakers off the mounting surface thereby reducing the contact area. The spacers also make the speakers stable and prevent them from moving around. ■ Cork Spacers for the Amp/Subwoofer HTX-22HDPAW Cork spacer Bottom Side ■ Cork Spacers for the Front Speakers Cork spacer HTX-22HDST top HTX-22HDST Keyhole mounting slot Cork spacer bot
ページ18に含まれる内容の要旨
Connecting the Speakers—Continued Speaker Connection Precautions Making the Connections Read the following before connecting your Remove the pre- 1 speakers: cut insulation • Disconnect the power cord from the wall from the ends of outlet before making any connections. the speaker • Connect only speakers with an impedance cables, and of 6 ohms or higher. twist the bare wires tightly. • Read the instructions supplied with your Push the lever to speakers. 2 open the hole
ページ19に含まれる内容の要旨
Connecting the Speakers—Continued Connecting only the Front Speakers The following hookup diagram shows how to connect the included front speakers for 2.1-channel operation. Front right speaker Front left speaker Red line Red terminal White line White terminal Red line White line Supplied speaker Supplied speaker cable cable Connecting 5.1 Speakers The following hookup diagram shows how to connect the included front speakers, a center speaker, and surround speakers for 5.1-chan
ページ20に含まれる内容の要旨
Connecting the Speakers—Continued Connecting Surround Back Speakers For 7.1-channel surround sound, in addition to the 5.1 speakers shown in the hookup diagram on page 19, you’ll need a pair of surround back speakers and a power amp to drive them. Using an RCA audio cable, connect the HTX-22HD’s SURROUND BACK PRE OUT jacks to the audio input on the power amp, as shown below. AUDIO INPUT Surround Surround back right back left Power amp speaker speaker Note: • If you’re using
