ページ1に含まれる内容の要旨
ED-901
Dolby surr ound AC-3 Decoder
Instruction Manual
DOLBY SURROUND AC-3 DECODER
INPUT SELECTOR OUTPUT CH. MODE
ON ON 10dB C S
POWER PROGRAM STATUS
DELAY TIME CINEMA Re-EQ MIDNIGHT THEATER LEF LEVEL CENTER SURROUND
INPUT 1 (VDP) INPUT 2 (DVD) L C R LS RS
AC-3 mSEC.
ON OFF ED-901
CONTENTS
Features................................................ 2 Connections ......................................... 8
Important Safeguards........................... 3 Operations.............................
ページ2に含まれる内容の要旨
Declaration of Conformity Thank you for your purchase of the ONKYO ED-901 Dolby Surround AC-3 Decorder. We, ONKYO EUROPE Please read this manual thoroughly before making connections ELECTRONICS GMBH INDUSTRIESTRASSE 18/20 and plugging in the AC power cord. 82110 GERMERING, Following the instructions in this manual will enable you to GERMANY obtain optimum performance and maximum listening enjoy- declare in own responsibility, that the ONKYO product described ment from your new ED-901. in this
ページ3に含まれる内容の要旨
Important Safeguards 1. Read Instructions — All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions — The safety and operating instructions should be retained for future reference. 3. Heed Warnings — All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions — All operating and use instructions should be followed. 5. Water and Moisture — The appliance should not be used near water — for ex
ページ4に含まれる内容の要旨
Precautions 1. Warranty card The serial number is written on the rear panel of the unit. Write the serial number and model number on your warranty card and keep it in a safe place. 2. Recording Copyright Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder. 3. AC fuse The fuse is located inside the chassis and is not user service- able. If power does not come on, contact your ONKYO service center. 4. Care From time to time you shoul
ページ5に含まれる内容の要旨
Introduction Onkyo’s ED-901 Dolby Surround AC-3 Decoder brings your home the excitement of Dolby Surround AC-3 sound effects from your LaserDiscs, etc. that employ the latest Dolby AC-3 technology. The ED-901 consists of an AC-3RF demodulator, an AC-3 decoder, and a Cinema Re-EQ circuit. An ideal AC-3 home theater system may include either an Onkyo TX-SV919THX or TX-SV828THX surround receiver. These receivers can be connected to the ED-901 through the DB-25 connector. What is Dolby Surround AC-
ページ6に含まれる内容の要旨
Speaker Placement Speaker Placement We recommend that you use the ED-901 in conjunction with the Onkyo TX-SV919THX or TX-SV828THX surround receiver. If you have a complete THX speaker system that is connected to either of these receivers, the addition of new speakers or arrangement of the current speaker configuration is unnecessary. If you do not have a complete THX speaker system... The highest quality Dolby Surround AC-3 sound can be reproduced when the ED-901 is connected to five full range
ページ7に含まれる内容の要旨
Control Positions and Names NOTE: If there is a protective film on the surface of the display, making it difficult to read the display, remove it. For more information about the function of a particular button, please turn to the page listed in the brackets ([ ]) following each name. 11 10 9 8 7 12 3 4 5 6 DOLBY SURROUND AC-3 DECODER INPUT SELECTOR OUTPUT CH. MODE ON ON 10dB C S POWER PROGRAM STATUS INPUT 1 (VDP) INPUT 2 (DVD) DELAY TIME CINEMA Re-EQ MIDNIGHT THEATER LEFT LEVEL CENTER SUR
ページ8に含まれる内容の要旨
Connections · Do not plug in the power cord until all connections have been made. · Before connecting the ED-901 to the receiver, make sure that the POWER switches on both the ED-901 and the receiver are in the OFF position. · On each pair of input jacks, the lower jack (marked R: Red) corresponds to the right channel and the upper jack (marked L: White) to the left channel. · Be sure to read the Receiver Instruction Manual in addition to this manual. For connection to the Onkyo TX-SV919THX surr
ページ9に含まれる内容の要旨
Operation Note: • Before performing the following procedure, make sure that the ED-901 is properly connected to the surround receiver. 4 • To play Dolby Pro Logic sound sources... 3 The ED-901 is not equipped with a Dolby Pro Logic decoder. To play Dolby Pro Logic sound sources, connect the ED-901 to your receiver by audio cables and set the receiver's Input Selector to Analog Input ("VIDEO-4" for the TX-SV919THX and "VIDEO-1" for the TX-SV828THX). 1. Turn on the power of the sur- round receiver
ページ10に含まれる内容の要旨
Operation Output Channel Mode Setting the Output Channel Mode (OUTPUT CH. MODE) · The highest quality Dolby Surround AC-3 sound can be reproduced when the ED-901 is connected to five full- range THX speakers and one or more subwoofers. To get the most out of the ED-901, it is strongly recommended that you set-up a complete THX speaker system. · If no Center speaker or Surround speaker is connected to your system, the sound to the unused channel can be properly distributed to other channels: If C
ページ11に含まれる内容の要旨
Operation DELAY TIME Setting the Surround Delay For Dolby Surround AC-3, as opposed to the conventional Dolby Pro Logic technol- ogy, it is unnecessary to set the time delay between front speakers and surround speakers. The only thing you should consider is the difference between the front speaker-listener distance and surround speaker-listener distance. 1. Press the DELAY TIME button repeatedly until the desired delay time is displayed. The factory-set default is 5 ms (millisec- onds). Each tim
ページ12に含まれる内容の要旨
Operation Re-EQ is licensed from Lucasfilm, Ltd. U.S. patent numbers 5,043,970; 5,189,703; 5,222,059. Foreign patents pending. Lucasfilm and Re-EQ are trademarks of Lucasfilm Ltd. MIDNIGHT TEATER LFE LEVEL CINEMA Re-EQ Using the Cinema Re-EQ, Mid- night Theater and LFE Modes Using the Cinema Re-EQ Mode Press the CINEMA Re-EQ button. The LED indicator (ON) immediately above this button will light to indicate that you are in the CINEMA Re-EQ mode. ON · Use the Cinema Re-EQ mode if your system is p
ページ13に含まれる内容の要旨
DB-25 OUTPUT CINEMA Re-EQ Anti-aliasing Filter Digital Audio Interface Block Diagram L 20 bit AC - RF R D/A AC - 3 RF VDP Demodulator LS OPTICAL 20 bit AC-3 Decoder D/A RS DVD C 20 bit COAXIAL D/A +10dB SUB-WOOFER LFE VIDEO SELECTOR S VIDEO OUTPUT VDP S VIDEO S Composite VIDEO DVD VIDEO AUDIO SELECTOR L AUDIO OUTPUT VDP L R L R DVD R 13
ページ14に含まれる内容の要旨
Troubleshooting Guide • No power. Cause: Power cord is not plugged in or is not com- pletely inserted. Remedy: Firmly plug in the power cord. • No Sound. Cause: Incorrect cord connections. Remedy: Connect the cord properly. Cause: Wrong input selector. Remedy: Select the proper input. Cause: Wrong position of coaxial/optical selector. Remedy: Select the proper position. Cause: Wrong input mode selection on the receiver. Remedy: Select the proper mode on the receiver. • No Sound from Center or Su
ページ15に含まれる内容の要旨
Specifications Input Seneitivity: INPUT-1,2 analog audio: 50kΩ and Impedance INPUT-1 AC-3RF: 75Ω INPUT-2digital (coaxial): 75Ω INPUT-1,2video: 1Vp-p/75Ω S-video Y: 1Vp-p/75Ω S-video C: 0.28Vp-p/75Ω Output Level: D-SUB25 5.1CH OUTPUT and Impedance LEFT, RIGHT, CENTER, LEFT SURROUND, RIGHT SURROUND (SUB WOOFER) : 0.2V/470Ω Frequency response: Dolby AC-3 5CH out 20 Hz - 20 kHz+0/-3dB Distortion: L/C/R/LS/RS: 0.05%/1kHz SUBWOOFER: 0.05%/50Hz Signal to noise ratio: 98dB (Output=2v)(IHF-A) Power consu
ページ16に含まれる内容の要旨
Sales Planning & Promotion Dept.: 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572, JAPAN Tel: 0720-31-8111 Fax: 0720-33-5222 ONKYO U.S.A. CORPORATION 200 Williams Drive, Ramsey, N.J. 07446, U.S.A. Tel: 201-825-7950 Fax: 201-825-8150 E-mail: onkyo@onkyousa. com ONKYO EUROPE ELECTRONICS GmbH Industriestrasse 18-20, 82110 Germering, GERMANY Tel: 089 84 93 20 Fax: 089 84 93 226 ONKYO FRANCE Immeuble Le Diamant, Domaine Technologique de Saclay, 4 Rue René Razel, HOMEPAGE http://www.onkyo.co.jp/ 9189
