ページ1に含まれる内容の要旨
Memcorp, Inc. Weston, FL Printed in China Memcorp, Inc. Weston, FL Impreso en China
ページ2に含まれる内容の要旨
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This Caution Marking and Rating Label are located at the bottom enclosure of the unit. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s
ページ3に含まれる内容の要旨
SAFETY PRECAUTIONS INFORMATION: This equipment complies with Class B digital device regulations. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn
ページ4に含まれる内容の要旨
LOCATION OF CONTROLS 1 10 2 3 11 12 4 5 6 13 7 14 8 15 9 16 17 1. LINE IN and DC IN 15V Z Jacks (Rear of Unit) (AC Adapter Part No. 295-05220-E000*) 2. Left Speaker (1 of 2) 3. iPod Compartment with Connector & Interchangeable Universal Docks 4. Left Speaker (2 of 2) 5. Power Button 6. VOL -/HR (Hour) Button 7. TIME SET/Skip/Search o Button 8. Remote Sensor 9. ALARM Button 10. Right Speaker (1 of 2) 11. ALARM SET/Skip/Search n Button 12. Right Speaker (2 of 2) 13. VOL +/MIN (Minute) Button 14.
ページ5に含まれる内容の要旨
LOCATION OF CONTROLS (CONTINUED) REMOTE 6 1 2 7 3 8 4 9 5 10 11 1. Power Button 2. VOL - Button 3. Skip/Search o Button 4. Play/Pause (®p) Button 5. DIMMER Button 6. Remote Transmitter (Top of Unit) 7. VOL + Button 8. Skip/Search n Button 9. MUTE Button 10.SLEEP Button 11.Battery Compartment (Rear of Unit) Remote Control Part No. 239-04358-E000* *Consumer Replaceable Part (See page 18 to order.) 4
ページ6に含まれる内容の要旨
POWER SOURCE AC CONNECTION Insert the small end of the AC adapter into the DC IN 15V jack (located on the rear of the unit). Connect the other end to a wall outlet having 120V AC, 60 Hz. AC Adapter, DC 15V Z NOTES: • Remove both the DC plug and the AC- IN plug to disconnect the AC adapter when not in use. To DC 5V IN Jack • Only use the supplied AC adapter which has the following specs: DC 15V Z BATTERY INSTALLATION Two (2) “AAA” size batteries can be used to provide a backup for the clock and
ページ7に含まれる内容の要旨
POWER SOURCE (CONTINUED) REMOTE BATTERY INSTALLATION 1. Remove the Battery Compartment by pressing in on the tab and then sliding the compartment out. 2. Install a CR2025 battery, paying attention to the polarity diagram in the Battery Compartment (positive side up). 3. Replace the Battery Compartment. BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Warning–Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent typ
ページ8に含まれる内容の要旨
INSERTING AN iPod 1 2 (A) (B) (A) (B) Locate the correct Universal Dock Slide the iPod (A) into the to use as shown on page 15. Universal Dock (B) (as shown). Insert the Universal Dock (A) into Gently push down so the the iPod compartment (B) (as connector on the iPod slides onto shown), making sure the tabs are the connector on this unit. facing front, and slip the tabs into place. Press the rear side of the Universal Dock until it is positioned inside the iPod compartment. NOTE: 3 To remove th
ページ9に含まれる内容の要旨
OPERATION USING AN iPod WITH THIS UNIT 1 2 With an iPod connected (see previous You can operate the iPod using its page), if this unit is not already on, turn own controls, as per its owner’s manual, or you can use the controls this unit on by pressing the Power button 1 1 1 1 on the included remote or main unit on the remote (shown) or on the main to operate the iPod. unit; “iPod” will appear in the display. 3 4 1 2 To skip forward or backward on the To play/pause the iPod: iPod: Press the Skip
ページ10に含まれる内容の要旨
OPERATION (CONTINUED) ADJUSTING THE VOLUME 1 2 1 3 To adjust the main volume: Press the VOL + 1 and/or - 2 button on the remote (shown) or the VOL +/MIN and/or -/HR button on the main unit to increase and/or decrease the volume. To mute the main volume: Press the MUTE button 3 on the remote; “MUTE” will appear in the display. Press this button again to unmute. NOTE: • The volume default level is 6. If backup batteries are NOT inserted, whenever you unplug and then plug back in the AC adapter, t
ページ11に含まれる内容の要旨
OPERATION (CONTINUED) TO SET OR RESET THE ACTUAL TIME 1 2 2 1 Within 15 seconds, press the VOL With the power off, press the TIME SET/Skip/Search o button; +/MIN button 1 to set the present minute and the VOL-/HR button the time will blink. 2 to set the present hour. Make 2 1 sure to set the correct AM/ PM setting. 3 Press the TIME SET/Skip/Search o button (or wait approx. 15 seconds) and the time will be set. 2 1 10
ページ12に含まれる内容の要旨
OPERATION (CONTINUED) TO SET OR RESET THE ALARM TIME 1 2 3 2 1 With the power off, press the Within 15 seconds, press the VOL ALARM SET/Skip/Search n +/MIN button 1 to set the alarm button; the Alarm time will blink in minute and the VOL -/HR button the display. 2 to set the alarm hour. Make sure to set the correct AM/PM setting. Press the ALARM SET/Skip/ Search n button 3 again. 3 4 3 2 1 The volume setting will appear in Repeatedly press the ALARM button to select alarm off, alarm on the displ
ページ13に含まれる内容の要旨
OPERATION (CONTINUED) 5 If set to iPod, insert the iPod as shown on page 7. Select your desired track and then make sure both your iPod and this unit are turned off. When the alarm time is reached, this unit will start playback on the track that you selected and the tracks following it in the playlist. This unit will playback for 60 minutes then turn off automatically or, if the remaining playlist has less than 60 minutes of playback time remaining, this unit will just playback the remaining tim
ページ14に含まれる内容の要旨
OPERATION (CONTINUED) TO SHUT THE ALARM OFF 1 2 1 1 2 2 If the alarm was set to BUZZER, If the alarm was set to iPod, press press the Power button 1 or the Power button 1 or ALARM button ALARM button 2 and the alarm will 2 to turn off the alarm and the alarm turn off and be set for the next day. will be set for the next day. To NOT To NOT set the alarm for the next set the alarm for the next day, press day, press the ALARM button 2 the ALARM button 2 repeatedly to repeatedly to select alarm off
ページ15に含まれる内容の要旨
OPERATION (CONTINUED) SLEEP DIMMER 1 1 With the unit in the LINE IN or iPod Press the DIMMER button on the mode, press the SLEEP button on the remote (shown) or the SNOOZE/ remote; "10" will appear in the display for Dimmer button on the main unit a few seconds. (can only be used when the alarm Repeatedly press the SLEEP button to is not sounding or not in snooze turn the SLEEP feature on (“SLEEP” will mode) to adjust the brightness of appear in the display) and select a the display. SLEEP time
ページ16に含まれる内容の要旨
OPERATION (CONTINUED) iPod UNIVERSAL DOCKS Locate your iPod in the chart below and select the respective Universal Dock (the Universal Dock No. is engraved at the front of the Universal Docks as shown on the next page) to match with your iPod. Insert the corresponding Universal Dock and your iPod into the unit as described on page 7. iPod Type Memory Univ. Dock No. First No. 8 1 to (Part No. 624- Generation 8GB 54994-0012*) iPod nano Fifth 30GB No. 9 (Part No. 624- Generation 64994-0012*) iPod
ページ17に含まれる内容の要旨
OPERATION (CONTINUED) IMPORTANT! The Universal Dock No. is engraved at the front of the docks. Please refer to the illustration below for the location of the Universal Dock No. 8 8 16
ページ18に含まれる内容の要旨
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION No sound from iPod. Volume is set to Increase volume/unmute minimum or is muted. as shown on page 9. Incorrectly connected. Check the connection (see page 7). LINE IN cable connected. Unplug LINE IN cable. iPod not charging. This unit not connected The iPod can charge only with the AC adapter. when this unit is connected with the AC adapter. Time reset t
ページ19に含まれる内容の要旨
SPECIFICATIONS Power Source ...........................AC Adapter, DC 15V Z Speaker...............................................................4 x 8 ohms Output Power ...........................................................2 x 3W Weight............................................................................1 Lb Dimensions .........................2.25" (H) x 7.4" (W) x 6.75" (D) Weight and dimensions are approximate. Specifications are subject to change without notice. This product has
ページ20に含まれる内容の要旨
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www.memorexelectronics.com 201-05220-E010
