ページ1に含まれる内容の要旨
TOTALSPEAKERSOLUTIONS
TSS-SAT500
Owner’s Guide
(230V)
ENGLISH
ページ2に含まれる内容の要旨
TSS-SAT500 OWNER’S GUIDE Table of Contents 3 Introduction 3 Included 3 Planning Your System 3 Placement 4 Wall-Mounting 5 Connections 5 Maintenance and Service 6 Specifications 2 TSS-SAT500
ページ3に含まれる内容の要旨
® INTRODUCTION PLACEMENT ™ NOTE: The TSS-SAT500 can be placed directly on a shelf, Infinity Total Solutions or mounted on a wall using the included wall bracket. Infinity Total Solutions continues Infinity’s longstanding commitment to accurate sound reproduction. Our high-quality drivers, precision As Left and Right Front Channels dividing networks and rigid, well-braced enclosures combine to For left and right front channels, place one satellite to the left and deliver uncompromised performanc
ページ4に含まれる内容の要旨
® Step 5. Screw the ball and shaft assembly (B) to 1/4"-20 insert on WALL-MOUNTING rear of speaker. Back out 1/2 of a turn and tighten nut against the speaker. The TSS-SAT500 satellite is designed to be mounted on the wall. There is a wall bracket included.The speaker bracket will require four 1-1/2" #10 wood screws; each screw should be fastened to a wall stud. If a wall stud is unavailable, install an anchor appropriate for a 1-1/2"#10 screw. NOTE: The customer is responsible for the correct s
ページ5に含まれる内容の要旨
CONNECTIONS MAINTENANCE AND SERVICE After placing the speakers, you are ready to connect your system. The TSS-SAT500 enclosure may be cleaned using a soft cloth to First, turn off all audio-system power. Use high-quality speaker wire remove fingerprints or to wipe off dust. to make your connections. #18-gauge speaker wire with polarity All wiring connections should be inspected and cleaned or remade coding is included. For longer distances, #16-gauge or heavier periodically.The frequency of main
ページ6に含まれる内容の要旨
SPECIFICATIONS TSS-SAT500 Frequency Range: 150Hz – 25,000Hz (±3dB) Recommended Amplifier Power Range: 10 – 100 watts Sensitivity: 86dB (2.83V @ 1 meter) Nominal Impedance: 8Ω Crossover Frequency: 7,000Hz Midrange Driver(s): 64mm (2-1/2") magnetically shielded High-Frequency Driver: 19mm (3/4") magnetically shielded Dimensions (H x W x D): 195mm x 89mm x 70mm (7-11/16" x 3-1/2" x 2-3/4") Weight: 0.5kg (1.2 lb) Infinity continually strives to update and improve existing products, as well as create
ページ7に含まれる内容の要旨
NOTES TSS-SAT500 7 ENGLISH
ページ8に含まれる内容の要旨
© 2005 Harman International Industries, Incorporated.All rights reserved. Infinity Systems, 250 Crossways Park Drive,Woodbury, NY 11797 USA www.infinitysystems.com Infinity and Harman International are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Total Solutions is a trademark of Harman International Industries, Incorporated. Dolby and Pro Logic are registered trademarks of Dolby Laboratories. DTS is a registered trademar