ページ1に含まれる内容の要旨
DIGITAL CAMERA CARD
-
CE AG06
DIGITALKAMERA-KARTE
OPERATION MANUAL
BEDIENUNGSANLEITUNG
page Seite
• •
Introduction ................................................ 2 Vorwort ...................................................... 2
•
Key Features ............................................. 3 •
Hauptmerkmale ......................................... 3
• Notice ........................................................ 4 •
Zur Beachtung ........................................... 3
• •
ページ2に含まれる内容の要旨
In U.S.A.: Declaration of Conformity Note: This equipment has been tested and found to comply with the limits for a Class B digital device, Digital Camera Card: CE-AG06 pursuant to Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. These limits are designed to provide reasonable Operation is subject to the following two conditions: (1) protection against harmful interference in a residential This device may not cause harmful interference, and installation. This equipme
ページ3に含まれる内容の要旨
ENGLISH CONTENTS Thank you very much for choosing the SHARP Introduction .................................................... 2 digital camera card CE-AG06. Key Features .................................................. 3 Please read this operation manual carefully to Notice ............................................................. 4 use the product properly. After reading, keep the Names and Functions of Parts ....................... 6 manual in a safe place for later reference. Installing
ページ4に含まれる内容の要旨
Notice Introduction • This product cannot be used with models other This product (digital camera card CE-AG06) can than those listed at left (as of January 2002). • Having this product inserted in a notebook be used as a digital camera when inserted in a computer or the like can result in failure. CF card slot, as in the SL-5500. • The copyright law provides that pictures you took Software installed in the main unit allows you to with this product cannot be used without prior transmit pictures t
ページ5に含まれる内容の要旨
Key Features • The CE-AG06, when inserted into the main unit, offers you a joy of photography instantly. Image sensor: CMOS Image sensor with 350,000 pixels Maximum image resolution: × 480 640 dots (VGA) • Using the main unit zoom feature lets you zoom in on your subject to a magnification of about two. • The close-up feature keeps you as close to your subject as about 6 cm. • The pictures you took can be saved to the memory of the main unit or to an SD memory card in the JPEG format. Memo:
ページ6に含まれる内容の要旨
• Never remove the product or manipulate the Notice battery replacement switch of the main unit while an image is being stored. These actions When using this product, please fully observe may corrupt the picture data. these handling precautions to prevent failures and other troubles. • Do not place the product in an unstable place. It may fail under strong pressure or impact. • When carrying the main unit or leaving it out of service, remove the product from it and insert • Do not place the
ページ7に含まれる内容の要旨
unit. Avoid also applying undue force from the • Do not drop or give a strong shock to the rotary lens mechanism. product. Failures, such as the loss of focus and inability to insert the product into the main unit, • Do not touch the lens with a pointed object or may result. bare hands. The lens may be flawed or stained. If the lens gets dirty, lightly wipe it with a cotton • Never touch the connection terminal. The swab or any other soft material. product may be disabled under electrostatic in
ページ8に含まれる内容の要旨
Names and Functions of Parts Focus dial Turn the dial to focus on your subject to shoot (see page 11). Lens Lens unit The lens unit rotates. Rotate it to aim at you subject to shoot (see page 10). Card unit Shutter release button Press to take a picture and save the picture data. Page 6 02.1.12, 1:03 PM
ページ9に含まれる内容の要旨
Installing and Removing the Digital Camera Card Installing the card in the main unit . Remove the Display protection cover from the 1 main unit. . Turn the main unit on. 2 . If a card is already inserted in the CF card 3 slot of the main unit, remove it. • Refer to the operation manual of the main unit when removing cards. . Insert this product (CE-AG06) fully straight 4 into the CF card slot of the main unit. • The stylus supplied with the main unit cannot be detached once the product is inse
ページ10に含まれる内容の要旨
Removing the card from the main unit . Exit all applications running on the main unit. 1 . Tap the CF card icon ( ) in the lower right 2 corner of the LCD screen to see a popup menu. Then, tap "Eject card" on this menu. • The CF card icon disappears. . With the main unit turned on, remove the 3 product from it by pulling it straight. . Insert the CF card slot Protection card into 4 the CF card slot of the main unit. Caution • Do not remove the product from the main unit Hold around this area by
ページ11に含まれる内容の要旨
Taking Pictures Caution Basic flow of photography • Be careful not to block the lens with your fingers . Insert the product into the main unit (see page 1 or other objects when taking pictures. 7). • You cannot take pictures while image data . Launch the Camera Application from the main 2 saving is in progress. unit (refer to the documentation that comes with the Camera Application). Memo A digital camera screen (or the LCD screen • For instructions on operating the main unit and in which your s
ページ12に含まれる内容の要旨
(Figure A) Adjusting the rotation and Lens unit orientation of the lens unit The lens unit rotates. Holding the main unit, aim the lens unit at your subject for adjustment. Caution Do not turn the lens unit past its range of rotation, which spans about 180° from the position shown in Figure A to that in Figure B. • Do not force the lens unit to rotate. • You can orient the lens unit at yourself to capture your self-portraits. (Figure B) Page 10 02.1.12, 1:03 PM
ページ13に含まれる内容の要旨
Adjusting the focus Tips on taking pictures Turn the focus dial to optimize the image of your • If you take a picture in a dark environment, its subject appearing on the LCD screen of the main image may look coarse, but this is not a failure. unit. • When you press the shutter release button, the image you shot stays still on the LCD screen for a while until its save is completed, when the screen is restored, allowing you take the next picture. • If you sway the main unit up and down or to left
ページ14に含まれる内容の要旨
Taking pictures in a room under Dew condensation If this product is quickly moved from a cold place fluorescent light into a warm place, the temperature difference will If you use this product in a room under fluores- cause dew to condense inside and outside the cent light, subtle changes in brightness or hue, product. Generally, allow the product to stand for or horizontal streaks in varying shades of light about 1 hour at the ambient temperature before contrast may appear in the picture. This
ページ15に含まれる内容の要旨
Customer care • To the main unit and the lens unit, lightly wipe with a clean, soft dry cloth, such as a cotton swab. • Never use organic solvents, such as thinner or benzine, and wet cloths for cleaning. Use of these materials may degenerate or discolor the main unit and the lens unit. • When leaving the product out of service for extended periods of time, remove it from the main unit and store it to protect the lens (see page 8). Caution When the product has been removed from the main unit, do
ページ16に含まれる内容の要旨
Specifications Model CE-AG06 Product name Digital camera card Image sensor 1/4-type primary color RGB filter CMOS Image sensor with 350,000 (effective 310,000) square pixels Lens Monofocus lens F3.4 f=3.85 mm (equivalent to 40 mm on a 35 mm camera) Shutter speed Automatic (1/10 to 1/15,750 second) Focus mode Manual Focus range Approx. 6 cm to infinity Exposure control Electronic shutter White balance Automatic Monitor Subjects (images) are displayed on the main unit screen. Picture storage Inter
ページ17に含まれる内容の要旨
Troubleshooting If you are experiencing difficulties with the camera card, check the following table for possible solu- tions before requesting repair services: Problem Cause and solution Nothing appears on • The product may not be connected properly. Check that it is fully inserted in the the LCD screen (the CF card slot of the main unit. LCD screen looks • Check that the battery (rechargeable) loaded in the main unit are not weak or black or green). depleted. Low or depleted battery loaded in
ページ18に含まれる内容の要旨
Problem Cause and solution Picture is not clear. • Check that the lens is not dirty. If the lens gets dirty, clean it with a cotton swab or any other soft material. • Check that the focus is adjusted correctly. Turn the focus dial for adjustment (see page 11). • Haven’t you photograph any source of infrared emission? When a source of infrared emission is shot, its colors may not look right. • When you photograph a brightly shining object, horizontal lines will appear in the resultant picture. Th
ページ19に含まれる内容の要旨
MEMO Page 17 02.1.12, 1:03 PM
ページ20に含まれる内容の要旨
MEMO Page 18 02.1.12, 1:03 PM
