ページ1に含まれる内容の要旨
Camera Adaptor
AW-AD700BS
for AW-F575 Series
Before attempting to connect or operate this product, please read
these instructions completely.
PREFACE
• The Camera Adaptor AW-AD700BS docks directly • Video Power (VP) Multiplex Operation is available
to the Color Camera AW-F575 series, making it a using with the Power Separator WV-PS700.
standard-alone camera for two-piece recording • Possible to mount a lens having zoom, focus or
system applications. servo functions.
Connection via a VTR cable fo
ページ2に含まれる内容の要旨
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS q @3 w !2 !1 !0 o i e VTR MULTI - 20 INT + 1 ENC Y/C/B + 2 r R/G/B @2 t MPX - 60(dB) PB - 1 Y/PR/PB @1 CABLE AUDIO EARPHONE VTR RCU/VTR SEL LEVEL OUT SEL TRIGGER SIGNAL y u !4 !5 !3 !6 !7 !8 !9 @4 @0 1. Camera Handle 6. Intercom Jack (M6) (INCOM) This jack is used for communication between the 2. Camera Adaptor Holding Screw/knob camera operator and operators of Remote Control The camera adaptor can be removed from the Unit (RCU) and Special Effect G
ページ3に含まれる内容の要旨
R/G/B: 14. Gen-lock input connector (BNC) (GEN-LOCK) The R, G and B signals are supplied from the The color video signal of the camera is automatical- R, G and B Output Connector. ly synchronized to the Gen-lock signal (composite Y/PR/PB: or black burst) which is supplied to this connector. The color difference (R-Y & B-Y) signals and The gen-lock signal is used for system reference, luminance (Y) signal are supplied from the such as when using a Special Effects Generator. VTR/RCU Connector (18)
ページ4に含まれる内容の要旨
MII portable VTR (26-pin) 22. Recording/Tally Indicator (red) (REC TALLY) WV-CA26A26 (26p-26p cable) This indicator lights when the VTR is set to the • 26-pin Studio Cable (RCU Cable) recording mode (through the VTR Start/Stop WV-CA26U15 Button), and informs the person concerned of WV-CA26U30 scenes being recorded. The Tally indicator also WV-CA26U100 lights when the camera is in full system operation together with the Remote Control Unit and Special 19. Lens Connector Effects Generator. In case
ページ5に含まれる内容の要旨
• Control Voltage (each voltage is ±0.5V.) for the n Lens Connector (19) lens. • EPin configuration 1 Not used 2 Not used Speed 3 GND Low High 4 Not used NEAR 4.0V 2.5V 5 Not used FAR 6.0V 7.5V 6 +12V IN WIDE 4.0V 2.5V 7 +5V IN TELE 6.0V 7.5V 8 FOCUS CONT 9 ZOOM CONT 10 Not used 11 +7.5V IN 12 +2.5V IN n Pan/Tilt Control Connector (20) n Optional Pan/Tilt Control Cable • Pin configuration WV-CA10U25 1 GND Red 2 COM (0V) Brown 3 Not used 4 LEFT 5 RIGTH Glay 6 UP Purple 7 DOWN Blie 8
ページ6に含まれる内容の要旨
INSTALLATION Installation of the Camera Adaptor 1. Mounting the Camera Adaptor 2. Removing the Camera Adaptor 1-1 Mount the Camera Adaptor with Camera Handle to 2-1 Loosen two Camera Adaptor Holding Screw/Knob the camera while engaging the 68-pin connector. (2) on the Camera Adaptor. Loosen two Camera Adaptor Holding Knobs. 68-pin connector. 1-2 Tighten two Camera Adaptor Holding Screw/knob 2-2 Remove the Camera Adaptor while pressing up the (2) firmly and make sure the adopter is securely Relea
ページ7に含まれる内容の要旨
SPECIFICATIONS Camera Docked: Color camera AW-F575 series connected through 68-pin connector Gen-lock Input: NTSC composite (VBS) signal or black burst signal Video Output: 1.0 V[p-p] NTSC composite/75 W (BNC) connector Y/C (S-VIDEO) Output: (S-VIDEO Connector) 0.714 V[p-p] Video Level Luminance (Y) composite/75 W 0.286 V[p-p] Burst Level Chrominance/75 W VTR/RCU Output (26-pin connector) 1.0 V[p-p] NTSC Composite/75 W Composite, Y/C/B, R/G/B, Y/PR/PB Selectabe Composite: 1.0 V[p-p] composite/75
ページ8に含まれる内容の要旨
Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 3F-5, Secaucus, NJ 07094 Regional Offices: EASTERN ZONE: 50 Meadowlands Parkway, Secaucus, NJ 07094 (201) 348-7620 CENTRAL ZONE: 1707 North Randall Road, Elgin, IL 60123 (847) 468-5200 SOUTHERN ZONE: Atlanta Region: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 Panazip 11 (770) 338-6841, fax (770) 338-6741 Law Enforcement Video Products: 1225