ページ1に含まれる内容の要旨
OWNER’S MANUAL
Estd. 1926
Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: enquiries@tannoy.com
Tannoy North America T: 00 1 (519) 745 1158 E: inquiries@tannoyna.com
Tannoy Deutschland T: 00 49 (0180) 1111 881 E: info@tannoy.com
Tannoy France T: 00 33 (0)1 7036 7473 E: ventes@tannoy.com
6481 0490
ページ2に含まれる内容の要旨
Unpacking Instructions After opening the carton and folding the end leaves out of the way, remove the packing cushion to reveal the plinth and bottom of the loudspeaker. Locate the bag containing the four mounting cones and cups. Turn the loudspeaker over so that the cabinet now stands on the floor inside the carton. Lift the carton upwards to reveal the loudspeaker. Examine all packing material and inspect the carton for signs of external damage. If there is evidence of excessive mishandling in
ページ3に含まれる内容の要旨
Cable Choice Connecting your Loudspeakers Always use the best quality of cable available within your budget. High quality audio signals passing from the amplifier to the loudspeaker To avoid potential damage to your loudspeaker, ensure that the amplifier is switched OFF prior to connecting or disconnecting any cables. are unusual in their demands on the cable. Wide dynamic range and frequency bandwidth information has to coexist with the ability Before switching on double check that all connecti
ページ4に含まれる内容の要旨
CONNECTION IN BI-WIRE MODE CONNECTION IN BI-AMP MODE TO RIGHT SPEAKER TO RIGHT + - + - SPEAKER L R HIGH FREQUENCY POWER AMPLIFIER LOW FREQUENCY POWER AMPLIFIER L R + - + - + - + - TO 'GROUND' OR TO 'GROUND' OR L R 'EARTH' 'EARTH' POWER AMPLIFIER CONNECTION CONNECTION ON HIGH LINKS ON AMPLIFIER (OPTIONAL) FREQUENCY TO REMOVED AMPLIFIER (OPTIONAL) RIGHT SPEAKER LINKS Please note in bi-wire mode that the link plates should first be removed. REMOVED • Be sure that the amplifier is switched OFF an
ページ5に含まれる内容の要旨
Grille Removal The High Frequency Section Special acoustically transparent cloth is used in the grille assembly. However for the very best performance, you may wish to remove The high frequency driver consists of a wide dynamic range compression unit giving superb transient performance with a smooth uncoloured the grilles. response. The compression unit feeds acoustic power through a phase compensating device, the Tannoy Tulip Waveguide ™, to the throat of the acoustic horn. This horn provides a
ページ6に含まれる内容の要旨
Care of the Cabinet The cabinet is constructed from carefully selected solid hardwood and veneers that have been hand finished to exacting standards. The wood should only be cleaned with a dry cloth or with a light application of quality non-silicone furniture polish, taking care not to get polish on the grille cloth. Technical Specifications In common with all solid wood furniture, exposure to extremes of heat, cold and varying humidity will cause the wood to ease slightly. Therefore it is reco
