ページ1に含まれる内容の要旨
B475
USER MANUAL
ページ2に含まれる内容の要旨
2
ページ3に含まれる内容の要旨
CONTENTS 1. Introduction .......................................................................................................... 5 2. Unpacking............................................................................................................ 5 3. Connectors/Cabling ............................................................................................. 5 4. Polarity Checking .................................................................................................
ページ4に含まれる内容の要旨
4
ページ5に含まれる内容の要旨
1. Introduction Thank you for purchasing Tannoy B475. The Tannoy B475 is an 18” direct radiating bass loudspeaker system, designed for high definition sound reinforcement at low and ultra-low frequencies. It will extend the power bandwidth of Tannoy i/T range mid/high sound reinforcement systems to below 30Hz, making it ideal for effects in club, theatre and concert sound applications, with ultra-low frequency enhancement and increased system headroom. The B475 is intended for use on the
ページ6に含まれる内容の要旨
CABLE RUN C.S.A. OF EACH CABLE % POWER LOSS % POWER LOSS (m) CONDUCTOR (mm) RESISTANCE W W INTO 8W W LOAD INTO 4W W LOAD 10 2.5 0.14 1.7 3.5 4.0 0.09 1.1 2.2 6.0 0.06 0.73 1.5 25 2.5 0.35 4.3 8.6 4.0 0.22 2.7 5.4 6.0 0.14 1.8 3.6 50 2.5 0.69 8.6 17.0 4.0 0.43 5.4 11.0 6.0 0.29 3.6 7.2 100 2.5 1.38 17.0 35.0 4.0 0.86 11.0 22.0 6.0 0.58 7.2 14.0 4. Polarity Checking It is most important to check the polarity of the wiring. A simple method of doing this without a pulse based polar
ページ7に含まれる内容の要旨
6. Crossovers For optimal performance the B475 has been designed to operate with Tannoy Install or Transportable series, e.g. i12/T12, i15 and T300, where overall system control is achieved by utilising the TDX2 system controller. The TDX2 has been factory preset to provide the recommended cross-over points, delays and overall system balance. Please refer to the TDX2 manual for operation. Alternatively, Tannoy TX1, TX2 and TX3 system controllers can be used. If you intend using an alterna
ページ8に含まれる内容の要旨
9. Positioning When a bass loudspeaker is used in an environment with boundary surfaces, its placement affects its frequency response. When such effects are properly understood, they can be used to great effect in producing the desired sound quality without the aid of additional amplification. Consider Figure 9a in the diagram below, here we see a loudspeaker in free field or anechoic conditions. We measure its sound pressure level at a distance D, and refer to this as our reference level
ページ9に含まれる内容の要旨
10. Dimensions 9
ページ10に含まれる内容の要旨
11. Technical Specifications Frequency response (1) +/- 3dB 28Hz - 240Hz Recommended Amplifier Power 400 - 800 Watt / 8Ω Power Handling Average (2) Programme Peak (10ms) 300 Watt 600 Watt 1200 Watt Sensitivity (1) 2.83 volt @ 1m 98dB 101dB (half space) Maximum SPL (3) Average Peak @ 1m 123dB 129dB Impedance Nominal 8Ω Minimum 7.8Ω Distortion nd rd 0.1 Full Power 2 Harmonic 3 Harmonic 100 Hz 0.22% 0.12% 250 Hz 0.23%
ページ11に含まれる内容の要旨
12. B475 Service Parts & Accessories Part Number Description 7900 0599 Driver Kit Type 4505 7900 0603 Recone Kit Type 4505 8001 2190 EBS10 Eye Bolt Set M10 8000 0727 TDX2 Digital loudspeaker management system 60-250V - UK 8000 0728 TDX2 Digital loudspeaker management system 60-250V - EUR 8000 0729 TDX2 Digital loudspeaker management system 60-250V - USA 13. Warranty No maintenance of the B475 loudspeaker is necessary. All Tannoy professional loudspeaker products are covered by a 5-yea
ページ12に含まれる内容の要旨
Tannoy Limited, Professional Division, Coatbridge, Strathclyde, ML5 4TF, Scotland. Tel: +44 (0) 1236 420199 Fax +44 (0) 1236 428230 e-mail: prosales@tannoy.com Website: www.tannoy.com Tannoy / TGI North America Inc., 335 Gage Avenue, Suite 1, Kitchener, Ontario, Canada N2M 5E1. Tel: (519) 745-1158 Fax: (519) 745-2364 e-mail: inquiries@tgina.com Website: www.tannoy.com Tannoy Nederland b.v., Anthonetta Kuijlstraat 1
