Samson Bass Enclosure VX410aの取扱説明書

ページ1に含まれる内容の要旨

VX410
VX410a
series
VX115 BASS
4 x10″ + 1″ High Frequency CD
Bass Enclosure
Hartke

ページ2に含まれる内容の要旨

VX410 and VX410a Introduction and Features Congratulations on purchasing the VX410 or VX410a bass enclosure by Hartke! Continuing Larry Hartke’s legendary commitment to bass players, the VX “Very Extreme” Series enclosures have been designed to provide excellent tone with a warm punchy output. The VX410 and VX410a features four 10” proprietary low frequency drivers with specially treated cones impregnated fabric surrounds, matched convex dust covers all mounted in a heavy duty steel frame. Roun

ページ3に含まれる内容の要旨

Connecting the VX410 and VX410a About Impedance Before you hook up your speaker cabinet be sure that you understand a little about impedance. Impedance is the electronic load that the speaker puts on the power amplifier and is measured in Ohms. Here is the tricky, yet simple rule of impedance; When two speakers are wired in "Parallel" the total impedance is cut in half and EFFECT Hartke Systems Distributed Exclusively by Samson Technologies Corp. Hicksville, New York 11802 RETUIRN SEND MODEL 2

ページ4に含まれる内容の要旨

VX410 and VX410a Specifications Type Bass speaker enclosure Impedance (Ohms) 8 Ohms Impedance Power Handling 400 Watts Peak Power Handling Low Frequency Drivers 4-10″ Special Design 8 ohm, 100 wattSpeakers, High Frequency Driver 1″ Throat Compression Driver Dimensions Height:25″ (62.2 cm) Width: 25″ (62.2 cm) Depth: 15″ (47.0 cm) Weight VX410 72 lbs. (32.6 kg) VX410a 70 lbs. (31.68 kg) Specifications subject to change without notice. Hartke Distributed Worldwide Exclusively by: Samson Technolog