ページ1に含まれる内容の要旨
EX500
SAMSON
500 WAT T POWERED SUBWOOFER
OWNERS MANUAL
®
ページ2に含まれる内容の要旨
Safety Instructions Caution: To reduce the hazard of electrical shock, CAUTION FOR CONTINUED PROTECTION AGAINST RISK do not remove cover or back. OF FIRE, REPLACE ONLY WITH SAME TYPE FUSE ATTENTION No user serviceable parts inside. Please refer all UTILISER UN FUSIBLE DE servicing to qualified personnel. RECHANGE DE MÊME TYPE WARNING DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE RISK OF ELECTRIC SHOCK AVIS DO NOT OPEN RISQUE DE CHOC ELECTRONIQUE NE PAS OUVRIR WARNING: To reduce the risk of
ページ3に含まれる内容の要旨
Table of Contents Introduction 2 EX500 Features 3 Controls and Functions Front Panel Layout 4 Rear Panel Layout 5 Configuring Your Speaker System 6 Operating the EX500 The EX500 Control Panel EX500 Mono Sub with Powered Satellites 8 EX500 Stereo Sub with Powered Satellites 9 EX500 Mono Sub with Passive Satellites 10 EX500 Stereo Sub with Passive Satellites 11 EX500 Connections 12 Caster Installation 12 Specifications 13 Copyright 2001, Samson Technologies Corp. Printed April, 2001 Samson Techno
ページ4に含まれる内容の要旨
Introduction Thank you for purchasing the Expedition EX500 Subwoofer by Samson. The EX500 is a self- powered, 500 Watt subwoofer featuring a 15” heavy duty driver, complemented by a 500 Watt, lightweight, Down Tracking Amplifier. The EX500 also offers an active stereo crossover providing a high-passed output for running your satellite speakers. Solid 3/4 inch plywood construction, steel corners, tough carpet covering and larger casters make the EX500 a road warrior. In fixed installation system
ページ5に含まれる内容の要旨
EX500 Features SAMSON The Samson Expedition EX500 Powered Subwoofer utilizes the latest technology in loudspeaker and power amplifier design. Here are some of its main features: • Heavy-duty, 15 inch Low Frequency Transducer With Butyl Rubber Surround • 500 Watt Down Tracking Power Amplifier • Balanced High Pass Outputs for Satellite Speakers • Variable Crossover 30 - 200 Hz • Stereo / Mono Operation Switch • Volume Control • Heavy-Duty, Rear Mounted Casters • Extra Large Grab Handles • 35mm
ページ6に含まれる内容の要旨
Controls and Functions Front Panel Layout 1 2 3 4 SAMSON 5 6 8 7 1 GRILL SCREEN - Tough steel construction pro- 5 TRANSDUCER - Heavy Duty 15” extended range vides durable and stylish protection for speaker. low frequency driver . 2 ENCLOSURE - Rigid 3/4” Plywood Construction. 6 BUTYL RUBBER SURROUND - Assures maximum excursion while maintaining tight bass response. 3 POLE MOUNT - 1 3/8 inch (35mm) standard speaker stand receptacle. 7 TUNED PORTS - Quiet port design offering linear extended low
ページ7に含まれる内容の要旨
Controls and Functions Rear Panel Layout 1 2 3 4 5 6 7 8 BALANCED INPUTS BALANCED HIGH PASS OUTPUTS Hz 5 105 • • • PEAK STEREO •••• MONO •• • • 0 10 30 200 LEVEL SWEEP LEFT RIGHT LEFT RIGHT POWERED SUBWOOFER 500 WAT TS EX500 SAMSON A.C. MAINS POWER ENGINEERED AND DESIGNED SERIAL IN THE UNITED STATES No. BY SAMSON TECHNOLOGIES ON AVIS; POWER 115V/230V 50HZ/60Hz 500W RATING RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR 60Hz 115VAC DO NOT EXPOSE THIS EQUIPMENT CAUTION TO RAIN OR MOISTURE. 230VAC
ページ8に含まれる内容の要旨
Configuring Your Speaker System Before you start plugging in cables, you should take a minute to decide how you want to interface your new sub- woofer. There are several ways you can interface the EX500, however most systems set-ups fall into two cate- gories, Stereo or Mono (Common) sub operation. Common Sub Operation In most cases a common sub, or mono bass operation is desired. This is true for several reasons, but mostly because low frequencies produced by a subwoofer tend to be non-directio
ページ9に含まれる内容の要旨
Operating the EX500 EX500 CONTROL PANEL The EX500’s control panel provides the connections and user interface to the EX500’s internal electronic crossover and power amplifier section. The internal amplifier is a 500 Watt tracking amplifier capable of producing incredible bass output while running super cool, and at the same time, weighing half as much as conventional power amplifiers. EX500 employs an electronic crossover that adjusts the high frequency cutoff point for the sub- woofer, and als
ページ10に含まれる内容の要旨
2 1 2 1 3 3 Operating the EX500 EX500 MONO SUB WITH POWERED SATELLITES The EX500 is a perfect addition to any pair of powered full range enclosures like the Samson EX20 and EX30. Below is a typical system set-up using the EX500 with a mixer and a pair of powered satellite loudspeakers. The EX500’s input and outputs utilize industry standard XLR connectors. For a detailed wiring diagram, see the sec- tion EX500 Connections on page 12. Follow the steps below the diagram to set up your system. E
ページ11に含まれる内容の要旨
2 1 2 1 3 3 Operating the EX500 EX500 STEREO SUB WITH POWERED SATELLITES Two EX500’s can be used with any pair of powered full range enclosures like the Samson EX20 and EX30. Below is a typical system set-up using two EX500’s with a mixer and a pair of powered satellite loudspeakers. The EX500’s inputs and outputs utilize industry standard XLR connectors. For a detailed wiring diagram, see the section EX500 Connections on page 12. Follow the steps below the diagram to set up your system. EX20
ページ12に含まれる内容の要旨
U F 2 1 2 1 3 3 Operating the EX500 EX500 MONO SUB WITH PASSIVE SATELLITES If your system uses a standard stereo power amp and passive full range enclosures, like the Samson EX10, the EX500 is easily interfaced for extended bass. Below is a typical system set-up using the EX500 with a mixer, stereo power amp and a pair of passive satellite loudspeakers.The EX500’s inputs and outputs utilize industry standard XLR connectors. For a detailed wiring diagram, see the section EX500 Connections on pa
ページ13に含まれる内容の要旨
U F 2 1 2 1 3 3 Operating the EX500 EX500 STEREO SUB WITH PASSIVE SATELLITES If your system uses a standard stereo power amp and passive full range enclosures, like the Samson EX10, the EX500 is easily interfaced for extended bass. Below is a typical system set-up using the EX500 with a mixer, stereo power amp and a pair of passive satellite loudspeakers.The EX500’s inputs and outputs utilize industry standard XLR connectors. For a detailed wiring diagram, see the section EX500 Connections on
ページ14に含まれる内容の要旨
Connections EX500 XLR WIRING DIAGRAM The EX500’s input and outputs utilize industry standard XLR connectors. Below is a detailed wiring diagram for the EX500 XLR connectors. XLR Balanced Wiring Guide Hot Hot (2) Common Common (1) 1 2 21 3 3 Solder Points End View Cold Cold (3) Female XLR Hot (2) Hot Common (1) Common 12 2 1 3 3 End View Solder Points Cold Cold (3) Male XLR CASTER INSTALLATION • Locate the four casters in the EX500 shipping carton. • Now locate the four caster recepta- cles whi
ページ15に含まれる内容の要旨
Specifications Specifications Transducer: 15", Heavy Duty Driver, 3 inch voice coil, aluminum former Amplifier: High-efficiency tracking converter Power Rating: 500 Watts RMS Frequency response 30Hz- 300Hz+/-3 dB Sensitivity: 94dB SPL @ 1 W/1m Input Balanced Connector: XLR - FEMALE Output Balanced, high-passed tracking low frequency crossover point Connector: XLR - MALE Crossover Frequency: Variable 30Hz – 200Hz Switch Functions Stereo /Mono: Selects stereo or mono low frequency operation Enclo
ページ16に含まれる内容の要旨
Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 www.samsontech.com
