ページ1に含まれる内容の要旨
OWNER’S MANUAL
S10 / S8
Powered Subwoofers
ページ2に含まれる内容の要旨
SAFETY INSTRUCTIONS APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR USAGE CAUTION: TO PREVENT ELECTRIC SHOCK, CAUTION: To reduce the risk of electric MATCH WIDE BLADE PLUG TO WIDE SLOT, shock, do not remove cover (or back). INSERT FULLY. No user-serviceable parts inside. Refer servicing to qualified service personnel. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME • Explanation of Graphical Symbols LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE
ページ3に含まれる内容の要旨
INSTALLATION Voltage Selector (See Figure 1) For use in the U.S., the S10 / S8 comes preset from the factory at 115V. For use in other countries, the voltage may be set at 230V. (Please note that an outlet adapter or alternate power cord may be required.) Figure 1: Connecting the Line Level Audio Inputs (See Figure 2) Voltage Selector If your surround sound receiver or amplifier has only one subwoofer output, simply plug it into the Left Line Input. If your receiver or amplifier has a built-i
ページ4に含まれる内容の要旨
SPEAKER SPECIFICATIONS S10 S8 System Configuration: Vented Powered Subwoofer Vented Powered Subwoofer Woofer: 10" Long Excursion Treated Paper 8" Long Excursion Treated Paper Cone Woofer with Butyl Surround Cone Woofer with Butyl Surround Ports: Dual Ports to Eliminate Dual Ports to Eliminate Vent Noise and Distortion Vent Noise and Distortion Frequency Response: 32Hz - 200Hz 45Hz - 200Hz Power: 120 Watts RMS; 160 Watts Peak 80 Watts RMS; 120 Watts Peak Hook Ups: RCA L
