Phase Technology CM500iの取扱説明書

ページ1に含まれる内容の要旨

In-Ceiling Speaker
CM500i
Technical Information for System Engineers
Key Features
®
• BroadBeam waveguide technology
delivers a consistent dispersion pattern
up to 10 kHz for maximum coverage
™
area per speaker (EASE documented).
• One 133 mm (5.25 in) polypropylene
woofer and one 25 mm (1.0 in) convex
™
aluminum tweeter with FerroFluid
Tile bridge included
Specifications: CM500i
cooling mounted to a proprietary cast-
System Type 5.25” Coax, in-ceiling, ported (33 Watt transfo

ページ2に含まれる内容の要旨

In-Ceiling Speaker CM500i Preliminary Technical Information for System Engineers Applications Frequency Response ����� Designed for in-ceiling background ������������� π � to mid-level SPL applications, the �� CM500i is ideal for music & paging ����� in courthouses, schools, retail stores, grocery, restaurants, hotels, casinos, museums, conference rooms & churches. For applications where addi- ���� tional bass is required, SoundTube’s CM801i 8” subwoofer provides low-end respo

ページ3に含まれる内容の要旨

In-Ceiling Speaker CM500i Preliminary Technical Information for System Engineers shall have a nominal impedance of 8 variety of standard measurement tech- Patented SoundTube Ohms and be available for 25, 70.7 & 100 niques, including Measured Length Technologies Volt modes with voice coil/8 Ohm direct. Sequence (MLS) and Time Delay Spec- SoundTube Entertainment is con- The frequency-dividing network shall trometry (TDS). Performance, develop- stantly developing new technologies

ページ4に含まれる内容の要旨

In-Ceiling Speaker CM500i Preliminary Technical Information for System Engineers Mechanical Drawings The maximum backcan dimensions shall be no more than 197 mm (7.75 in) Side Top in height by 219.2 mm (8.63 in) in diam- eter. The maximum visible dimensions shall be no more than 24.5 mm (0.96 in) in height by 271.9 mm (10.71 in) in diam- eter. The backcan shall be constructed of aluminum. 197 mm 219.2 (7.75 in) mm The system shall include a 16-gauge (8.63 in) galvanized steel s