ページ1に含まれる内容の要旨
40-1425.fm Page 1 Wednesday, August 11, 1999 8:05 AM
Cat. No. 40-1425
2-Way In-Wall Speaker System
PREPARING THE
LOCATION
Be sure the mounting surface is be-
1 1
tween /2 and 1 /4 inches thick, and
that there is at least 5 inches of clear-
ance behind the mounting surface. Al-
so, be sure no wall studs or other
objects will block the back of the
speaker and no AC wiring is near.
Your Optimus 2-Way In-Wall Speaker
Follow these steps to prepare t
ページ2に含まれる内容の要旨
40-1425.fm Page 2 Wednesday, August 11, 1999 8:05 AM Caution: Be careful not to get paint on the speaker elements. Note: We recommend spray painting the grille to prevent blocking the grille holes with paint. 4. Connect the wire to the terminals After the paint dries, remove the paint on the back of the speaker by mask. pressing the red terminal’s tab, inserting one end of the marked Replace the grille after mounting the conductor, then releasing the tab. speaker. CONNECTING THE SPEAKER WI
ページ3に含まれる内容の要旨
40-1425.fm Page 3 Wednesday, August 11, 1999 8:05 AM 2. Be sure the mounting tabs are in • Keep the speaker dry. If it gets place (parallel with the edge of wet, wipe it dry immediately. Liq- speaker, not pointing outward), uid can contain minerals that can then plug the speaker into the corrode electronic circuits. mounting hole. • Keep the speaker away from dust and dirt which can cause prema- ture wear of parts. • Wipe the speaker frame occasion- ally with a damp cloth to keep it looking
ページ4に含まれる内容の要旨
40-1425.fm Page 4 Wednesday, August 11, 1999 8:05 AM Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in material and workman- ship under normal use for one (1) year from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra- dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, A
