ページ1に含まれる内容の要旨
8900 Keystone Crossing, Suite 1220
Indianapolis, Indiana 46240
. .
1 800 KLIPSCH • www.klipsch.com
Make sure you return your
warranty card so that we may
keep you up-to-date on new
Klipsch products and promo-
tions. As always, if you have
any questions, contact your
local authorized Klipsch dealer.
For your records:
Model
Serial Number
Date Purchased
Dealer Name
193110
15M1199
ページ2に含まれる内容の要旨
SP-1, SF-2, SF-1, SB-3, SB-2, SC-1, & SS-1 L O U D S P E A K E R S O w n e r ’s Manual & W a rranty
ページ3に含まれる内容の要旨
CAUTION: RISK OF ELECTRIC SHOCK! DO NOT OPEN! CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of this ! device. There are no user-serviceable parts inside. Refer repairs to a Klipsch authorized service center. AVIS: Risque de choc electricque, ne pas ouvrir. CAUTION! The international symbol of a lightning bolt inside a triangle is intended to caution you to ! uninsulated “dangerous voltage” within the device’s enclosure. The international symbol of
ページ4に含まれる内容の要旨
SS-1 Wall Mount Hole Marking Template 9 4 /16" Cut along dotted line and mail. IF YOU PREFER, YOU CAN REGISTER ONLINE AT WWW.KLIPSCH.COM For multiple speaker purchases, please fill out only one warranty card. Name: Street Address: City/State/Zip: Home Phone: Work Phone: E-mail Address: Would you like to receive the latest product updates and news via e-mail? q Yes q No Product Purchase Model and serial number must be included to honor your warranty card. For multiple speaker purchases, please
ページ5に含まれる内容の要旨
Klipsch Limited Warranty KLIPSCH, L.L.C. (“KLIPSCH”) warrants this product to be free from defects in materials and work- manship (subject to the terms set forth below). For a period of five (5) years from the date of purchase, KLIPSCH will repair or replace (at KLIPSCH’s option) this product or any defective parts (excluding electronics and amplifiers) in this product. For products that have electronics or amplifiers, the warranty on those parts is for a period of two (2) years from the date of pu
ページ6に含まれる内容の要旨
15. Dangerous Entry. Care should be taken that no foreign objects or liquids fall or are spilled inside the device. 16. Damage Requiring Service. The device should be serviced by a Klipsch authorized service center when: -The plug or power supply cord has been damaged. -Objects have fallen or liquid spilled inside of the device. -The device has been exposed to moisture. -The device does not appear to be operating properly or exhibits a marked change in performance. -The device has been dropped
ページ7に含まれる内容の要旨
Dear Klipsch Synergy Series Owner: Congratulations on your purchase of Klipsch Synergy Series loudspeakers! These products represent the best new thinking, coupled with the Klipsch tradition of sonic excellence. The Synergy Series was developed using the latest in materials and technology to deliver extraordinary sound from today’s digital sources. Designed as a family, the Klipsch Synergy Series was developed to provide optimal performance in either a home theater or music system. For home the
ページ8に含まれる内容の要旨
Component Specifications SB-2 SP-1 Sensitivity: 94dB @ 1 watt / 1 meter Sensitivity: 93dB @ 1 watt / 1 meter Bandwidth: 30Hz–20kHz±3dB Bandwidth: 54Hz–20kHz±3dB Nominal Impedance: 8 ohms Nominal Impedance: 8 ohms Crossover Frequencies: 2.3kHz and 125Hz Crossover Frequency: 2400Hz Power Handling: 100 watts maximum continuous Power Handling: 85 watts maximum continuous (400 watts peak) (340 watts peak) Enclosure Type, Tweeter and Mid Bass: Sealed Enclosure Type: Bass reflex via wide flare, rear-firi
ページ9に含まれる内容の要旨
Wall Mounting • Install the four rubber stick-on bumpers (one on each corner of the rear panel of the speaker) to provide clearance for the speaker wire between the wall and cabinet. This will also prevent the speaker from marring the wall. • Cut out the template on the back cover of the owner’s manual to assist in obtaining proper spacing of the two mounting holes. If the template is not available, space the mounting screws 9 1 4 /16" apart on a vertical line. Allow at least 1 /2" of cleara
ページ10に含まれる内容の要旨
Connect the SC-1 to the “Center” channel speaker output of your system’s power amplifier. Connect the SS-1 to the “Rear” or “Surround” channel speaker outputs of your system’s power amplifier. When connecting surround speakers to the rear channels of a 5.1 channel system, it is important that they are hooked up to the appropriate left and right rear channels as the surround effects are in stereo. LINE LEVEL CONNECTIONS / SP-1 ONLY Switch your electronics OFF when making all connections! These conn
ページ11に含まれる内容の要旨
Troubleshooting • If one or both SP-1 subwoofers have little or no output: — Double check your power (AC) and system connections. — Make sure that the power switch on the rear control panels of both units is set to the “ON” or “AUTO” position. — Check that the power light on the front of the SP-1 is lit. If not, check the AC fuse. When changing the AC main’s power fuse, unplug the power cord first. To access the fuse, use the appropriate screwdriver to unscrew the cap on the fuse receptacle. I
ページ12に含まれる内容の要旨
Klipsch Synergy Series Technology The Klipsch Synergy Series is a complete, matched family of high performance loudspeakers that offers superior home theater and two-channel performance. This series offers a choice of two bookshelf speakers, the SB-2 and SB-3, and three floorstanding main channel speakers—the SF-1 and SF-2 and a model with a built-in powered subwoofer, the SP-1. The voice-matched companion SC-1 center speaker and SS-1 surround speakers complete the family. A smaller version of ou
