ページ1に含まれる内容の要旨
C8/C10/C12/C15
Subwoofers
Congratulations! You have just purchased one of the most flexible subwoofers yet
from KICKER. Your Comp sub is designed to give you great bass performance in a wide
variety of applications. These installations instructions will help you get the most out of
your new KICKER sub. Thanks for buying KICKER. Enjoy!
Features
Hemispherical Polymineral Cone with Inverted Structural Dome™
(ISD) means high rigidity under pressure for accurate linear
ページ2に含まれる内容の要旨
Installation Instructions The Comp subs are designed to be as universal as possible. Great performance can be obtained when using them in sealed or vented boxes as well as on an Infinite Baffle (freeair). Infinite Baffle Mounting The infinite baffle or freeair mounting method is very effective in a sedan type of vehicle. The easiest way to do this is to cut out the parcel shelf just big enough for your chosen driver(s). The parcel shelf is usually not very strong and any flexing will decrease th
ページ3に含まれる内容の要旨
Sealed box mounting A very smooth bass response with good low bass extension is achieved when the Kicker Comp woofers are mounted in a correctly built sealed box with the correct airspace. Sealed (acoustic suspension) designs have been a favorite here at Kicker since the original Competition Series was introduced. We build just about all of our show vehicles with sealed boxes for the smooth response, good power handling and great sound quality they offer. Of all the enclosures possible the seale
ページ4に含まれる内容の要旨
Vented Box Mounting Almost as easy to build as the sealed box, the vented or ported enclosure can give you more output at certain bass frequencies. Although this design has an output advantage at some frequencies it also has a sharper rolloff characteristic which will only affect the lowest of bass frequencies. Overall a correctly designed vented enclosure will have some "free" output provided by the port itself. One major disadvantage to the vented design is the "unloading" of the woofer at ve
ページ5に含まれる内容の要旨
Multiple Woofer Enclosures If you are building enclosures for more than one woofer, they should always be divided to maintain the correct airspace for each woofer. There are a couple of reasons for this. First of all, not all woofers are exactly the same. If there are slight differences between the woofers in a common enclosure, at certain fre- quencies one woofer may think it's in a larger enclosure than intended. This can affect the power handling capability. Second, if one woofer fails, the r
ページ6に含まれる内容の要旨
Box Building Tips The material of choice for building a strong box is 3/4" MDF (Medium Density Fiberboard). Cross bracing is a good idea to help reduce panel vibration. Strips of 3/4" by 2" wood work well for tying the panels together. HDF (High Density Fiberboard) is also good as is a really good grade of plywood (such as marine grade 7 or 13 ply). Regular particle board is not very good for speaker enclosures. It is flexible and will crumble when you try to screw the woofer in. A good grade of
ページ7に含まれる内容の要旨
Specifications Model Comp 8 Comp 10 Comp 12 Comp 15 SPL 1W/1M 84.5dB 87.7dB 88.6dB 89.2dB Displacement, cc 620.0 982.3 1718.6 3256.8 Displacement, cu in 38.0 60 104.9 198.7 Hole cutout, in. dia. 6-7/8 9-3/16 10-15/16 13-11/16 Mounting Depth, in. 3-13/16 4-9/16 5-1/2 7-1/8 Revc 4.09 Ohms 3.65 Ohms 3.79 Ohms 3.23 Ohms Sd, SqM ,0206 .0370 .0532 .0856 BL, TM 9.08 10.17 11.69 15.84 Vas, Liters
ページ8に含まれる内容の要旨
SPEAKER SYSTEMS LIMITED WARRANTY Stillwater Designs warrants this product to be free from defects in material and workmanship under normal use for a period of one (1) year from date of original purchase from an authorized Kicker Dealer, unless this product is labeled “B Stock”, in which case it is warranted for ninety (90) days from date of purchase. Should service be necessary under this warranty for any reason due to manufac- turing defect or malfunction during the warranty period, Stillwater
