ページ1に含まれる内容の要旨
SRX700 Series User’s Guide
Part Number: 354538-002
ページ2に含まれる内容の要旨
CONTENTS Before You Begin - Important Information 3 Product Specifications 4-7 Recommended Amplifer Power & Infrasonic Filter Settings 7 Processor Tunings, DuraFlex™ Finish & Removable JBL Logo Badge 7 Input Panel and Block Diagram 8 Flying and Suspension 9-11 JBL Professional Warranty and Contact Information 12 Explanation of Graphic Symbols Important Safety Instructions The exclamation point within an equilateral triangle is 1. Read these instructions. intended to alert the users to the presen
ページ3に含まれる内容の要旨
BEFORE YOU BEGIN SRX725 SRX728S SRX712M SRX715 SRX722 SRX738 SRX718S The SRX700 speakers covered by this manual are not intended for fixed installation in outdoor or high moisture environments. Moisture can damage the speaker cone and surround and cause corrosion of electrical contacts and metal parts. Avoid exposing the speakers to direct moisture. Keep speakers out of extended or intense direct sunlight. The driver suspension will prematurely dry out and finished surfaces may be degraded by lo
ページ4に含まれる内容の要旨
SPECIFICATIONS SRX712M - 12¨, two-way, bass-reflex, stage-monitor / utility Frequency Range (-10 dB): 70 Hz - 20 kHz Frequency Response (±3 dB): 83 Hz - 18 kHz Coverage Pattern: 90º x 50º nominal Crossover Modes: Bi-amp / passive, externally switchable Crossover Frequency: 1.2 kHz Power Rating (Continuous¹/ Program/ Peak): Passive: 800 W / 1600 W / 3200 W Bi-amp LF: 800 W / 1000 W / 3200 W Bi-amp HF: 75 W / 150 W / 300 W Maximum SPL²: 131 dB SPL peak System Sensitivity (1w @ 1m): 96 dB SPL (pas
ページ5に含まれる内容の要旨
SRX722 - Dual 12¨, two-way, bass-reflex (suspendable version, SRX722F) Frequency Range (-10 dB): 72 Hz - 20 kHz Frequency Response (±3 dB): 81 Hz - 20 kHz Coverage Pattern: 75º x 50º nominal Crossover Modes: Bi-amp / passive, externally switchable Crossover Frequency: 1.2 kHz Power Rating (Continuous¹/Program/Peak): Passive: 1200 W / 2400 W / 4800 W Bi-amp LF: 1200 W / 2400 W / 4800 W Bi-amp HF: 75 W / 150 W / 300 W Maximum SPL²: 135 dB SPL peak System Sensitivity (1w @ 1m): 97 dB SPL (passive
ページ6に含まれる内容の要旨
SRX738 - 18¨, three-way, bass-reflex (suspendable version, SRX738F) Frequency Range (-10 dB): 35 Hz - 20 kHz Frequency Response (±3 dB): 44 Hz - 20 kHz Coverage Pattern: 60º x 40º nominal Crossover Modes: Bi-amp / passive, internally switchable Crossover Frequencies: 2 kHz / 350 Hz Power Rating (Continuous¹/Program/Peak): Passive: 800 W / 1600 W / 3200 W Bi-amp LF: 800 W / 1600 W / 3200 W Bi-amp HF: 350 W / 700 W / 1400 W Maximum SPL²: 130 dB SPL peak System Sensitivity (1w @ 1m): 95 dB SPL (pa
ページ7に含まれる内容の要旨
SRX728S - Dual 18¨, bass-reflex, subwoofer Frequency Range (-10 dB): 27 Hz - 220 Hz Frequency Response (±3 dB): 33 Hz - 220 Hz Input Connection Modes: Switchable, +1/-1 or +2/-2 Internally Selectable, Parallel or Discrete Recommended Crossover Frequencies: HPF: 80 Hz, 24 dB/octave LPF: 80 Hz, 24 dB/octave Power Rating (Continuous¹/Program/Peak): Parallel: 1600 W / 3200 W / 6400 W Maximum SPL²: 136 dB SPL peak Sensitivity (1w @ 1m): 98 dB SPL LF Driver: 2 x JBL 2268H 457 mm (18 in) Differentia
ページ8に含まれる内容の要旨
INPUT PANELS AND BLOCK DIAGRAMS SRX712M, SRX715, SRX722 and SRX725 - 1+ 1+ HPF HIGH JBL PROFESSIONAL Serial No. 1- 1- FREQ NL4 Northridge, CA USA Made in USA IN / THRU + 2+ 2+ 2 2- - + LOW PASSIVE FREQ MODE - 1 1+ + LPF IN / THRU 1- 1- NL4 IN / THRU 2+ 2+ LOW + 2 2- - FREQ (SRX722, SRX725 - SRX700 ONLY) PASSIVE BI-AMP + Serial No. BI-AMP PASSIVE ±1 IN: _Ω ±1 LF: _Ω 1+ 1+ HIGH ±1 LF: 8Ω ±1 IN: 8Ω ±2 N/C ±2 HF: 8Ω 1 1- - FREQ NL4 ±2 HF: 8Ω ±2 N/C SRX712M IN / THRU - 2+ 2+ PASSIVE 2 2- - + LOW BI-A
ページ9に含まれる内容の要旨
FLYING AND SUSPENSION JBL SRX700 series offers 4 models with suspendable capabilities: SRX715F, SRX722F, SRX725F and SRX738F. Before attempting to suspend your speakers, read and understand the following safety information. IMPORTANT SAFETY WARNING! The information in this section has been assembled from recognized engineering data and is intended for infor- mational purposes only. None of the information in this section should be used without first obtaining competent advice with respect to app
ページ10に含まれる内容の要旨
Inspection & Maintenance Suspension systems are comprised of mechanical devices and, as such, they require regular inspection and rou- tine maintenance to insure proper function ability. JBL SRX700F loudspeakers must be inspected for fatigue at least annually. The inspection shall include a visual survey of all corners and load bearing surfaces for signs of cracking, water damage, de-lamination, or any other condition that may decrease the strength of the loudspeaker enclosure. Accessory rigging
ページ11に含まれる内容の要旨
Suspension in Fixed Installations (Secondary Suspension) For fixed installations of SRX700F models using M10, forged-shoulder eyebolts, order JBL Part number 229- 00009-01 which includes 3 x 10 mm forged eyebolts with washers. WARNING Suspension of SRX700 speakers must employ both top attachment points. When "bridling" an SRX700,two (2) legs of equal length must be used. The rear attachment point is a pull-back point and is intended only for use in adjusting the down- angle of the speaker enclos
ページ12に含まれる内容の要旨
JBL WARRANTY AND CONTACTS Who Is Protected by This Warranty? Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product has been purchased in the Continental United States, Hawaii or Alaska. (This Warranty does not apply to JBL prod- ucts purchased elsewhere except for purchases by military outlets. Other purchasers should contact the local JBL distributor for warranty information.); and B.) The original dated bill of sale is presented whenever warr
