Elinchrom BX 250RIの取扱説明書

ページ1に含まれる内容の要旨

OPERATION MANUAL
GEBRAUCHSANLEITUNG
MANUEL D’UTILISATION
MANUAL DE FUNCIONAMIENTO
MANUALE D’USO
English / Deutsch / Français / Español / Italiano Elinchrom LTD
BXRi 06.04.2010 (73088)

ページ2に含まれる内容の要旨

Table of contents English Introduction 2 Declaration of conformity, disposal and recycling, CE marking 3 Safety notice and precaution 4 Basic features & advanced programmable features 5 Before you start / On-Off switch and fuse 6 Control panel 7 Reset the unit 8 Modelling lamp features & setup 8 Digital power display 9 Photocell / Eye-Cell / Automatic Mode 10 Photocell / Eye-Cell / Manual Mode 11 Charge Rea

ページ3に含まれる内容の要旨

Introduction English Dear Photographer, Thank you for buying your BX-Ri compact flash unit. All Elinchrom products are manufactured using the most advanced technology. Carefully selected com- ponents are used to ensure the highest quality and the equipment is submitted to many controls both during and after manufacture. We trust that it will give you many years of reliable service. All BX-Ri flash units are manufactured for the studio and location use of professional photographers.

ページ4に含まれる内容の要旨

Declaration of conformity English This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Product name: Professional Studio Flash unit Trade name: ELINCHROM Model number(s): BX 250Ri / BX 500Ri Name of responsible party: Elinchrom LTD Av. De Longemalle 11 1020 R

ページ5に含まれる内容の要旨

Safety Note English According to safety regulations, we draw your attention to the fact that these electronic flash units are not designed for use outdoors, in damp or dusty conditions and should not be used after being exposed to sudden temperature changes causing condensation. They must always be connected to an earthed (grounded) mains supply. On no account should any object be inserted into the ventilation holes. The units may retain an internal charge for a considerabl

ページ6に含まれる内容の要旨

Included basic features English The following basic features are easy to access and they are similar to previous Elinchrom compact flashes. • Flash power up and down buttons • Modelling lamp power up and down buttons • Modelling lamp prop / free / off button • Photocell on / off button • Ready charge beep on / off button • Test-flash button • 3.5 mm synchronisation socket • NEW EL-Skyport Wireless Triggering & Remote. Note: To function the integrated Transceiver requires the optional EL

ページ7に含まれる内容の要旨

Before you start ! English The BX-Ri (Multivoltage) units are adapted for operation on 90 - 260V/50 - 60Hz. Before connecting for the first time, check to make sure that your Modelling Lamp coincides with the voltage. They must always be connected to an earthed ( grounded) mains supply. All BX-Ri units have a bayonet mount and locking ring fitting, for fixing all Elinchrom and Prolinca accessories. Mount the unit securely to a suitable stand or support. Remove

ページ8に含まれる内容の要旨

Control panel English 14 12 3 8 6 7 11 9 10 4 5 2 1 16 13 15 17 Overview of controls 1. Mains inlet socket includes the mains fuse 11. Modelling lamp on/off-free-prop – (slow blow) programmable* 2. Mains on/off switch 12. Modelling lamp up & down buttons and 3. Modelling lamp fuse scroll /program buttons for advanced 4. Open flash / Test button features setup* 5. Synch socket / 3.5 mm jack / low 5V sync 13. Tilt head with extra umbrella f

ページ9に含まれる内容の要旨

Programmable features - Reset English How to „Reset“ the BX-Ri In case you need to „RESET“ the BX-Ri to the manufacturer settings please follow the steps below: 1. Switch the unit “off“ 2. Press both flash power up / down buttons (10) at the same time and switch the unit on 3. The Digital LED multi display (6) flashes in fast mode 4. Do not continue to press the touches, the resetting procedure is completed Modelling lamp features & setup Modelling lamps and fuses for 110 V & 230 V Unit Mo

ページ10に含まれる内容の要旨

Digital multi-display English The flash / modelling lamp power is displayed in f-stop compatible formats from 2.3 – 6.3 for BX 500Ri. The flash power difference from (e.g.) 5.3 – 6.3 is 1f-stop. The power range is 5 f-stops variable in 1/10th intervals which can be customised to (e.g.) 5/10th etc.. During charging or discharging, the display «flashes». In case of overheating or malfunction, the display shows «ER» for error. Display 2.3 3.3 4.3 5.3 6.3 Joules / Ws 31 62

ページ11に含まれる内容の要旨

Eye-CELL Setup English Intelligent Photocell-Sensor The Eye-Cell offers new features and can detect camera pre-flashes (anti red eye effect). To customise the pre-flash settings, please follow the instructions at paragraph 3. Eye-Cell Functions 1. Standard Photocell mode 2. Eye-Cell pre-flash mode 3. Setup number of pre-flashes manually or set to automatic detection 4. Setup pre-flash timings! Only for advanced users! 1. Using the Standard Photocell Mode Push “Cell” button, for less than

ページ12に含まれる内容の要旨

4. Manual Eye-Cell Pre-Flash Setup A. Press Cell button approx. 4 seconds until display shows “c.X”. (“X” is the number of settable pre-flashes plus the main flash from 1 up to 7) B. With “Flash-Power” up and down button, set the number of pre-flashes incl. mainflash. C. The display switches back to normal mode after approx. 4 seconds if no button is pressed. The settings are automatically stored. D. Cell LED flashes in fast intervals if the Eye-Cell pre-flash mode is active. > Recall The E

ページ13に含まれる内容の要旨

Charge Ready Beep Features English This feature creates a melody if settings are different between each unit to improve the acous- tical recognition that all the flashes have fired and recycled. Charge Ready Beep Setup • Setting - Press “Audio” button, less than 0.5 seconds to switch the Charge Ready Beep (ON / OFF) • LED Indication - Charge Ready Beep LED is on: Audio is active - Charge Ready Beep LED is off: Audio is inactive (Mute) • Changing Charge Ready Beep -On-Time

ページ14に含まれる内容の要旨

EL- Skyport Transceiver For Wireless Triggering – Setup English The EL-Skyport on / off, Group, Frequency Channel and the Power Steps Per Push can be customised. EL-Skyport on / off Press the flash power up-down buttons together to enter into the “Advanced Feature Setup” Display shows Change settings with the flash power up-down buttons r.0 EL-Skyport off r.1 EL- Skyport on r.2 EL-Skyport speed mode (only available with EL-Skyport Speed) After 3 to 4 seconds the settings ar

ページ15に含まれる内容の要旨

Flashtube replacement English If the unit does not flash but the ON/OFF switch indicates that there is power, it could be that the flash tube needs replacing. Flash tubes have a long life with average use, but multiflashing in long sequences can cause overheating of the electrodes leading to premature ageing, or perhaps the flastube is broken or cracked To replace the flash tube: 1. Switch off the mains switch 2. Remove the mains cable 3. Take the unit from its stand or lay it horizon

ページ16に含まれる内容の要旨

Technical data BX 250Ri BX 500Ri Flash power J(Ws) 250 500 Power supply V 90/260 90/260 F-stop, 1m, 100 ISO, with reflector 48° 64 90 Power range J(Ws) 16-250 31-500 Variable flash power f-stops 5 f-stops 1/16 - 1/1 Recycling time, min. / max. (230 V) s 0.29 / 0.73 0.36 / 1.13 Recycling time, min. / max. (115 V) s 0.27 / 1.02 0.34 / 1.45 Colour temperature max. power °K 5360 5410 Flash duration (t 0,5) 1/1 s 1/2762 1/1558 Fl

ページ17に含まれる内容の要旨

English Transmitter Speed 1 9 3 5 0 U s e r ­ M a n u a l C o n t e n t s : F eatur es­ 17 B at tery­ I nstal l ati on­ 17 Hot -shoe­ connector­ 17 O per ati ng­ I nstructi ons­ 17 Fr equency­ Channel ­ 18 T ri gger­ M odes­ 18 I ntegr ated­ SYNC­S ock et­ 19 Eli nchr om­RX­ F eatur es­ 19 EL - Skyport­ M odul es­ 20 T r oubl eshooti ng­ 20 CE­ Statements­ 21 FCC­ Compli ance­and­ ­ Advi sory­ Statement­ 21 Di sposal­ and­ r ecy cli ng­ 21

ページ18に含まれる内容の要旨

English EL-Skyport Transmitter SPEED //19350 Operating instructions : 2.4 GHz digital wireless Flash Trigger Transmitter Features EL - Skyport­T r ansmi t ter­Speed­is­designed­with­the­latest­2.4­GHz­Digital Wireless Technology . •­ SLR­Camer a­S ync­speeds:­SPEED­mode­up­to­ •­ Status­LED­f or­EL - Skyport­mode­and­bat tery­ 1/250­s,­ST ANDARD­mode­1/160­-­1/200­s. ­­­­­status. •­ 5­selectable­trigger­modes,­(4­Gr oups­+­All) •­ I mpr o v ed­housin

ページ19に含まれる内容の要旨

English Fr equency RX­f eatur e­but ton Fig. 2 channel­selector P ower­decr ease RX­f eatur e­but ton P ower­incr ease MODE­swi tch or­model ling­lamp toggle Flash­T est­/­Flash­Mode­/­ Configur ation­but ton Flexible­swiv el GROUP­swi tch Antenna­360­̊ Status­LED Frequency Channel Note: T r ansmi t ter­and­the­corr esponding­Transceiver RX ,­the­Universal Receiver or the EL units with integrated EL-Skyport Receiver ­must­ha v e­the­same­f r equency

ページ20に含まれる内容の要旨

English SET Config Mode: (to configure included features) -­­S wi tch­module­OFF . -­­Hold­test­push­but ton­and­switch­TX­ON. -­­K eep­test­push­but ton­pr essed­unti l­ST A TUS­LED­is­ON. ­Check­also­EL - Skyport­PC­/­MAC­softw ar e­3.0­f or­changing­T r ansmi t ter­Speed­set ting. The­EL - Skyport Transmitter ­triggers­the­EL - Skyport­Receiver ­modules­in­the­f ol lowing­modes: 1. ­ Off ­­Unit­is­OFF ,­no­f unction. 2. Select Group - Group (1 t