ページ1に含まれる内容の要旨
HP ProLiant ML310 Generation 3 Server
User Guide
September 2005 (First Edition)
Part Number 393772-001
ページ2に含まれる内容の要旨
© Copyright 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft and Windows are U.S. registered trademarks of Microsof
ページ3に含まれる内容の要旨
3 Contents Server component identification 7 Front panel components.......................................................................................................................7 Front panel LEDs and buttons..............................................................................................................8 Rear panel components ........................................................................................................................9 Rear panel LEDs
ページ4に含まれる内容の要旨
4 HP ProLiant ML310 Generation 3 Server User Guide Hardware options installation 35 Introduction........................................................................................................................................35 Processor and heatsink.......................................................................................................................35 Memory............................................................................................................
ページ5に含まれる内容の要旨
Contents 5 Diagnostic tools .................................................................................................................................71 Survey Utility .........................................................................................................................71 Array Diagnostic Utility .........................................................................................................72 HP Insight Diagnostics ....................................
ページ6に含まれる内容の要旨
6 HP ProLiant ML310 Generation 3 Server User Guide Declaration of conformity for products marked with the FCC logo, United States only .................103 Modifications ...................................................................................................................................104 Cables...............................................................................................................................................104 Mouse compliance statement ........
ページ7に含まれる内容の要旨
7 Server component identification In this section Front panel components..................................................................................................................7 Front panel LEDs and buttons........................................................................................................8 Rear panel components...................................................................................................................9 Rear panel LEDs................
ページ8に含まれる内容の要旨
8 HP ProLiant ML310 Generation 3 Server User Guide Item Description 1 Media bays (bezel blanks) 2 Power On/Standby button 3 Hard drive bays 4 USB connectors (2) 5 Bezel lock 6 CD-ROM drive Front panel LEDs and buttons Item Description Status 1 CD-ROM drive ejector N/A button 2 Power On/Standby button N/A 3 Power on/Standby LED Amber = System has AC power and is in standby mode Green = System has AC power and is functioning Off = System has no AC power
ページ9に含まれる内容の要旨
Server component identification 9 Item Description Status 4 Hard drive activity LED (for Green = Hard drives are properly connected and functioning non-hot-plug) Off = No hard drive activity 5 NIC link/activity LED Green = Linked to network Flashing green = Linked with activity on the network Off = No network connection 6 Internal system health Green = Normal (system on) LED Amber = System health is degraded Red = System health is critical Off = Normal (system off) 7 CD-ROM driv
ページ10に含まれる内容の要旨
10 HP ProLiant ML310 Generation 3 Server User Guide Item Description 4 Serial connector 5 Video connector 6 USB connectors (2) 7 RJ-45 Ethernet connector 8 RJ-45 connector (iLO) 9 Parallel connector Rear panel LEDs Item Description Status 1 NIC link LED On = Link Off = No link 2 NIC activity LED Flashing = Activity Off = No activity
ページ11に含まれる内容の要旨
Server component identification 11 System board components Item Description 1 Processor power connector 2 System power connector 3 DIMM slot 4 (Channel B) 4 DIMM slot 3 (Channel B) 5 DIMM slot 2 (Channel A) 6 DIMM slot 1 (Channel A) 7 IDE connector 8 Front USB connector 9 USB connector 10 SATA connector 11 System maintenance switch 12 USB tape drive connector 13 Diskette drive connector 14 Processor fan connector 15 System battery
ページ12に含まれる内容の要旨
12 HP ProLiant ML310 Generation 3 Server User Guide Item Description 16 Slot 4 PCI Express x1 17 Slot 3 PCI-X 18 Slot 2 PCI-X 19 Slot 1 PCI Express x4* 20 System fan connector * x8 PCI Express cards are supported, but will run at x4 speeds. System maintenance switch Position Default Function S1 Off Off = iLO 2 security is enabled On = iLO 2 security is disabled S2 Off Off = System configuration can be changed On = System configuration is locked S3 Off Reserved S4 Off
ページ13に含まれる内容の要旨
Server component identification 13 When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all system configuration settings from both CMOS and NVRAM. CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to properly configure the server or data loss could occur. For information on emergency ROM backup recovery, refer to ROMPaq disaster recovery (on page 99). System board LEDs Item LED description
ページ14に含まれる内容の要旨
14 HP ProLiant ML310 Generation 3 Server User Guide Item LED description Status 5 DIMM 1 failure Off = Normal Amber = DIMM 1 has failed or is missing 6 Processor fault Off = Normal Amber = A multibit error has occurred 7 Processor fan failure Off = Normal Amber = Processor fan has failed or is missing 8 AC Power Off = One of the following conditions exists: • No AC power Power supply bad Power supply in standby Power supply exceeded current limits Green = Power OK 9 Syste
ページ15に含まれる内容の要旨
Server component identification 15 NOTE: The system management driver must be installed in order for the internal health LED to provide pre-failure and warranty conditions. The front panel health LEDs indicate only the current hardware status. In some situations, HP SIM ("Array Diagnostic Utility" on page 72, "HP Insight Diagnostics" on page 72) may report server status differently than the health LEDs because the software tracks more system attributes. System LED and Internal he
ページ16に含まれる内容の要旨
16 HP ProLiant ML310 Generation 3 Server User Guide SCSI IDs Hot-plug SCSI hard drive LEDs
ページ17に含まれる内容の要旨
Server component identification 17 Item LED description Status 1 Activity status On = Drive activity Flashing = High activity on the drive or drive is being configured as part of an array. Off = No drive activity 2 Online status On = Drive is part of an array and is currently working. Flashing = Drive is actively online. Off = Drive is offline. 3 Fault status On = Drive failure Flashing = Fault-process activity Off = No fault-process activity Hot-plug SCSI hard drive LED
ページ18に含まれる内容の要旨
18 HP ProLiant ML310 Generation 3 Server User Guide Activity Online Fault LED Interpretation LED (1) LED (2) (3) Flashing Flashing Flashing Do not remove the drive. Removing a drive may cause data loss in non-fault-tolerant configurations. Either (1) the drive is part of an array being selected by an array configuration utility; (2) Drive Identification has been selected in HP SIM; or (3) drive firmware is being updated. Off Off On The drive has been placed offline due to hard disk
ページ19に含まれる内容の要旨
Server component identification 19 Hot-plug SATA or SAS hard drive LEDs Item LED Description Status 1 Fault/UID status Amber = Drive failure Flashing amber = Fault-process activity Blue = Unit identification is active Off = No fault-process activity 2 Online/Activity status Green = Drive activity Flashing green = High activity on the drive or drive is being configured as part of an array Off = No drive activity
ページ20に含まれる内容の要旨
20 HP ProLiant ML310 Generation 3 Server User Guide Fan locations Item Description 1 System fan 2 Processor fan
