ページ1に含まれる内容の要旨
368868/3 2013-04
S9 Series
™ ™
AutoSet & Elite
S9 AutoSet & S9 Elite
WELCOME POSITIVE AIRWAY PRESSURE DEVICES
EUR 1/3
Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center
Boulevard San Diego CA 92123 USA. ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other
ResMed locations worldwide.
For patent information, see www.resmed.com/ip.
Welcome Guide
S9, AutoSet, S9 Elite, H5
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Welcome Thank you for choosing the S9 AutoSet or S9 Elite. Before operating these devices, please read the entire Welcome and Information Guides. DC power inlet Module/Adapter port Air filter SD card slot Air outlet S9 at a glance The S9 system comprises the following elements: • S9 device • SlimLine air tubing • 90W or 30W power supply unit • S9 travel bag • SD card • S9 SD card protective folder. Optional components include: • H5i heated humidifier • H5i water tub • Standard
ページ4に含まれる内容の要旨
3 2 5 4 1 Setup 1. Connect the DC plug of the power supply unit to the rear of the S9. 2. Connect the power cord to the power supply unit. 3. Plug the other end of the power cord into the power outlet. 4. Connect one end of the air tubing firmly onto the air outlet. 5. Connect the assembled mask system to the free end of the air tubing. Notes: • For more information on assembling your mask see your mask user guide. • Recommended masks are available on www.resmed.com on the Products page unde
ページ5に含まれる内容の要旨
S9 basics LCD screen Home menu Start/Stop button Starts or stops treatment. Key: Home Humidity level Ramp Setup menu* Allows you to Heated tube make changes to settings. Climate Control Info menu* Allows you to Start/Stop view your sleep statistics. Push dial Push dial Turning the dial allows you to Setup menu scroll through the menu and change settings. Pushing the Info menu *The Info and Setup menus are disabled if S9 Essentials dial allows you to has been enabled by your
ページ6に含まれる内容の要旨
Adjusting ramp time Designed to make the beginning of treatment more comfortable, ramp time is the period during which the pressure increases from a low start pressure to the treatment pressure. To adjust your ramp time: 1. From your home 2. Press . 3. Turn until 4. Press to screen, turn The selection is the ramp time confirm your until the RAMP highlighted in you require is choice. screen is displayed orange. displayed. in blue. Using mask-fit You can use mask-fit to help you fit your
ページ7に含まれる内容の要旨
S9 Essentials S9 Essentials is designed to make device interaction and menu navigation easier for you. If enabled by the clinician, S9 Essentials disables the Info and Setup functionality so that you can simply start and stop therapy and adjust ramp, humidification and Climate Control. Selecting the mask type* To select your type of mask: 1. Press . The SETTINGS 2. Turn until Mask is 3. Press . screen is displayed. displayed in blue. The selection is highlighted in orange. 5. Press to c
ページ8に含まれる内容の要旨
Getting started 1. Make sure the power is connected. 2. Adjust the ramp time if required. 3. Fit your mask as described in your mask user guide. 4. To start therapy, simply breathe into the mask and/or press . 5. Lie down and arrange the air tubing so that it is free to move if you turn in your sleep. 6. To stop treatment at any time, remove your mask and/or press . Notes: • If your clinician has enabled SmartStart your device will start automatically when you breathe into the mask and stop
ページ9に含まれる内容の要旨
Cleaning and maintenance Refer to your mask and humidifier user guides for detailed instructions regarding the care of these devices. Daily Remove the air tubing by pulling on the finger grips on the cuff. Hang it in a clean, dry place until next use. Notes: • Do not hang the air tubing in direct sunlight as it may harden over time and eventually crack. • Do not wash the air tubing in a washing machine or dishwasher. Weekly 1. Remove the air tubing from the S9 device and the mask. 2. Wash th
ページ10に含まれる内容の要旨
SD card An SD card has been supplied to gather therapy data from your S9 device and provide settings updates from your clinician. When instructed to do so, disconnect the S9 device from the power outlet, remove your SD card, insert it in the protective folder and send it to your clinician. Removing the card 1. Push in the SD card to release it. 2. Remove the card. 3. Insert the card into the protective folder. 4. Send the protective folder back to your clinician as instructed. For m
ページ11に含まれる内容の要旨
ページ12に含まれる内容の要旨
368868/3 2013-04 ™ ™ S9 AutoSet & S9 Elite S9 Series POSITIVE AIRWAY PRESSURE DEVICES AutoSet & Elite WELCOME EUR 1/3 Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA. ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other ResMed locations worldwide. Welcome Guide For patent information, see www.resmed.com/ip. English • Deutsch • Franç
