ページ1に含まれる内容の要旨
Intel® Entry Server Chassis SC5275-E
User Guide
A Guide for Technically Qualified Assemblers of Intel® Identified
Subassemblies/Products
Order Number: C50277-001
ページ2に含まれる内容の要旨
Disclaimer ® Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a par
ページ3に含まれる内容の要旨
Preface Preface About this Manual ® Thank you for purchasing and using the Intel Entry Server Chassis SC5275-E. This manual is written for system technicians who are responsible for troubleshooting, upgrading, and reparing this server chassis. This document provides a brief overview of the features of the board/chassis, a list of accessories or other components you may need, troubleshooting information, and instructions on how to add and replace components on the Intel® Entry Server Chass
ページ4に含まれる内容の要旨
Preface Additional Information and Software If you need more information about this product or information about the accessories that can be used with this server chassis, use the following resources: For in-depth technical information about this Intel® Server Chassis SC5275-E Technical Product product, including BIOS settings and chipset Specification at information http://support.intel.com/support/motherboards/server/chassis/ SC5275E. If you just received this product and need to Inte
ページ5に含まれる内容の要旨
Preface Safety Information WARNING Before working with your server product, whether you are using this guide or any other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide. Use of other products / components will void the UL listing and other regulatory
ページ6に含まれる内容の要旨
Preface strap attached to chassis groundany unpainted metal surfaceon your server when handling parts. ESD and handling boards: Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by their edges. After removing a board from its protective wrapper or from the server, place the board component side up on a grounded, static free surface. Use a conductive foam pad if available but not the board wrapper. Do not slide board over any surface. Instal
ページ7に含まれる内容の要旨
Preface 5. Provide some electrostatic discharge (ESD) protection by wearing an antistatic wrist strap attached to chassis ground of the system—any unpainted metal surface—when handling components. 6. Do not operate the system with the chassis covers removed. After you have completed the six SAFETY steps above, you can remove the system covers. To do this: 1. Unlock and remove the padlock from the back of the system if a padlock has been installed. 2. Remove and save all screws from
ページ8に含まれる内容の要旨
Preface Benutzer können am Netzgerät dieses Produkts keine Reparaturen vornehmen. Das Produkt enthält möglicherweise mehrere Netzgeräte. Wartungsarbeiten müssen von qualifizierten Technikern ausgeführt werden. Versuchen Sie nicht, das mitgelieferte Netzkabel zu ändern oder zu verwenden, wenn es sich nicht genau um den erforderlichen Typ handelt. Ein Produkt mit mehreren Netzgeräten hat für jedes Netzgerät ein eigenes Netzkabel. Der Wechselstrom des Systems wird durch den E
ページ9に含まれる内容の要旨
Preface durch denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend. Das System wurde für den Betrieb in einer normalen Büroumgebung entwickelt. Der Standort sollte: sauber und staubfrei sein (Hausstaub ausgenommen); gut gelüftet und keinen Heizquellen ausgesetzt sein (einschließlich direkter Sonneneinstrahlung); keinen Erschütterungen ausgesetzt sein; keine s
ページ10に含まれる内容の要旨
Preface CONSIGNES DE SÉCURITÉ -Lorsque vous ouvrez le boîtier pour accéder à l’intérieur du système, suivez les consignes suivantes: 1. Mettez hors tension tous les périphériques connectés au système. 2. Mettez le système hors tension en mettant l’interrupteur général en position OFF (bouton-poussoir). 3. Débranchez tous les cordons d’alimentation c.a. du système et des prises murales. 4. Identifiez et débranchez tous les câbles reliés aux connecteurs d’E-S ou aux accès derrière
ページ11に含まれる内容の要旨
Preface télécommunications de votre modem durant un orage. Muni d'une prise murale correctement mise à la terre. Suffisamment spacieux pour vous permettre d'accéder aux câbles d'alimentation (ceux-ci étant le seul moyen de mettre le système hors tension). Instrucciones de seguridad importantes Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety Information en en h
ページ12に含まれる内容の要旨
Preface sistema. 2. Compruebe que los cables, las placas adicionales y otros componentes se hayan instalado correctamente. 3. Incorpore las tapas al chasis mediante los tornillos extraídos anteriormente, tensándolos firmemente. 4. Inserte el bloqueo de seguridad en el sistema y bloquéelo para impedir que pueda accederse al mismo sin autorización. 5. Conecte todos los cables externos y los cables de alimentación CA al sistema. Si el sistema ha estado en funcionamiento, el microproc
ページ13に含まれる内容の要旨
Preface PASSI DI SICUREZZA: Qualora si rimuovano le coperture del telaio per accedere all’interno del sistema, seguire i seguenti passi: 1. Spegnere tutti i dispositivi periferici collegati al sistema. 2. Spegnere il sistema, usando il pulsante spento/acceso dell’interruttore del sistema. 3. Togliere tutte le spine dei cavi del sistema dalle prese elettriche. 4. Identificare e sconnettere tutti i cavi attaccati ai collegamenti I/O od alle prese installate sul retro del sistema. 5.
ページ14に含まれる内容の要旨
Preface Intel® Entry Server Chassis SC5275-E User Guide xiv
ページ15に含まれる内容の要旨
Contents Contents Warnings ......................................................................................................... v 1 Chassis Description....................................................................................... 1 Kit Contents.............................................................................................................................1 Feature Summary ...........................................................................................
ページ16に含まれる内容の要旨
Contents Replacing a Front System Fan.....................................................................................31 Replacing a Rear System Fan .....................................................................................32 Replacing the Power Supply.................................................................................................33 Replacing the Front Panel Board..........................................................................................34 Repl
ページ17に含まれる内容の要旨
Contents Figure 6. Removing the 3.5-inch EMI Shield .............................................................................14 Figure 7. Installing a Floppy Drive .............................................................................................15 Figure 8. Removing EMI Shields ...............................................................................................16 Figure 9. Slide Rails..............................................................................
ページ18に含まれる内容の要旨
Contents Intel® Entry Server Chassis SC5275-E User Guide xviii
ページ19に含まれる内容の要旨
1 Chassis Description 1 Chassis Description Kit Contents The chassis subassembly kit includes this product guide and a box that includes two pair of 5.25- inch external drive rails, four different types of mounting screws, and two brackets for the optional SCSI hot-swap hard drive bay (SCSI hot-swap hard drive bay not included). A B C TP00835 A. Flat head 6-32 x 5mm [.200] C. Hex head 6-32 x 6mm [.256] B. Flat head M3 x 5mm [.200] Figure 1. Screw Description Feature Summary Table 1.
ページ20に含まれる内容の要旨
1 Chassis Description Chassis Front View A B C D E F TP00053 A. Front panel controls and indicators B. 5.25-inch removable media drive bays C. 3.5-inch removable media drive bay D. Internal hard drive bay cage (behind door) E. Security lock F. USB port Intel® Entry Server Chassis SC5275-E User Guide 2
