ページ1に含まれる内容の要旨
INSTALLATION/OPERATION
®
Spectra IV SL and
Spectra IV SE Series
23X, 27X, and 35X Dome Drives
C3463M-B (2/11)
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Contents Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Switch Settings. . . . . . . . . .
ページ4に含まれる内容の要旨
Field Align . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Low Light Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Minimum Focus Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Software/Language File Upload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Description ® Spectra IV SL and Spectra IV SE are Pelco’s premier integrated dome systems. These systems feature a high resolution camera/optics package with configurable dome drive software. This manual is designed primarily to be a reference tool for the installation and operation of your system. Inside you will find information about features and commands, as well as a detailed menu tree and a quick start guide. Be sure to thoroughly familiarize yourself with the information in this manual
ページ7に含まれる内容の要旨
Installation This manual contains installation instructions for the Spectra IV dome drive only. For complete installation instructions for a Spectra IV dome system, refer to the installation manual that was shipped with the back box. SWITCH SETTINGS Before installing the dome drive, you must configure the receiver address, termination, and baud setting. The DIP switches used to configure these settings are located on the base of the dome drive. Figure 1 shows the default settings for the DIP s
ページ8に含まれる内容の要旨
Pelco P Protocol Control Systems To compensate for Pelco P protocol control systems from other manufacturers, set SW2-3 to the ON position. This may improve dome control with some of these control systems. SW2 SWITCHES 4 AND 5: SERIAL PORT SETTINGS RS-422 Setting (Default) SW2-4 and SW2-5 should both be set to the OFF position for RS-422 setting. For control, only two wires should be connected to the RX- and RX+ connectors on the circuit board inside the back box. For bidirectional control, fo
ページ9に含まれる内容の要旨
DOME DRIVE To install the dome drive: 1. Align the blue and red tabs with the blue and red arrows on the hinged door inside the back box. 2. Push the tabs in. Insert one side and then the other side. 3. Continue pushing on the ends of the tabs until both sides click into place (refer to Figure 2). Figure 2. Dome Drive Installation NOTE: When removing a dome drive that has been in use, caution should be taken to avoid direct contact with the top plate of the unit. This section of the unit will
ページ10に含まれる内容の要旨
Operation QUICK OPERATION GUIDE Pan and Tilt Move the joystick or press the direction keys left/right and up/down. Zoom Far To zoom far: 1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the optical zoom limit. 2. Release the button or joystick for one second. 3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the picture you want or reach the digital zoom* limit. Zoom Wide Press the Zoom Wide button or turn th
ページ11に含まれる内容の要旨
PRESET 95: ACCESSING MAIN MENU You can call up the main menu on your monitor by configuring (setting or creating) preset 95 (preset 28 in AD-32 preset mode). Configuring preset 95 for Pelco’s controllers varies according to the type of controller you are using. Instructions for configuring preset 95 are given below for various Pelco controllers. CM6700/CM6800 1. Enter the number of the Spectra IV dome system and press the CAM key. 2. Enter 95 and hold the PRESET key for two seconds. 3. In the
ページ12に含まれる内容の要旨
ENDURA WORKSTATION 1. Right-click in the video pane of the Spectra IV dome system. 2. Click Preset and then click Select Preset. 3. Enter 95 and then click OK. VCD5000 1. Enter 95 for the preset action. The shortcuts menu appears. 2. Press the Preset button on the KBD5000. DX4100/DX4500/DX4600/DX8100 1. Click the PTZ button on the toolbar. The PTZ control appears. 2. Click the Program button on the PTZ control. The main menu appears. ® DIGITAL SENTRY SYSTEM SOFTWARE 1. Click the PTZ tab. 2. Cli
ページ13に含まれる内容の要旨
23X LowLight Day/Night Menu Tree SPECTRA IV LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM SYSTEM INFORMATION DISPLAY SETUP SERIAL # XXXXXXXXXXXXXX PRESET LABEL 2 (SECS) DOME DRIVE MODEL XX-XXXX ZONE LABEL 2 (SECS) BACK BOX MEMORY AVAILABLE ZOOM 2 (SECS) SOFTWARE VERSION XX.X AZIMUTH/ELEVATION 2 (SECS) BUILD DIRECTION OFF FONT VERSION XX.X ALARM MESSAGE 2 (SECS) COMM XXXXXXXXXX DATE/TIME ON D ADDRESS 1 P ADDRESS 2 <
ページ14に含まれる内容の要旨
DOME SETTINGS * LINE SYNC PRESETS PATTERNS LINE SYNC ON PRESET NUMBER 1 PATTERN NUMBER LINE SYNC PHASE 0 ***PRESET NOT DEFINED*** REFERENCE INFO PATTERN USAGE REMAINING REFERENCE INFORMATION AZIMUTH ELEVATION ZOOM CUSTOM
ページ15に含まれる内容の要旨
27X LowLight Day/Night Menu Tree SPECTRA IV LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM SYSTEM INFORMATION DISPLAY SETUP SERIAL # XXXXXXXXXXXXXX PRESET LABEL 2 (SECS) DOME DRIVE MODEL XX-XXXX ZONE LABEL 2 (SECS) BACK BOX MEMORY AVAILABLE ZOOM 2 (SECS) SOFTWARE VERSION XX.X AZIMUTH/ELEVATION 2 (SECS) BUILD DIRECTION OFF FONT VERSION XX.X ALARM MESSAGE 2 (SECS) COMM XXXXXXXXXX DATE/TIME ON D ADDRESS 1 EVENT LABEL 2
ページ16に含まれる内容の要旨
DOME SETTINGS * POWER UP LINE SYNC PRESETS MOTION DETECTION EDIT DETECTION AREAS POWER UP ACTION AUTO LINE SYNC ON PRESET NUMBER MOTION DETECTION ENABLED DETECTION AREA 1 LINE SYNC PHASE 0 ***PRESET NOT DEFINED*** LOCATION 0 ACTIVATE AUX SENSITIVITY MEDIUM AUX T
ページ17に含まれる内容の要旨
35X LowLight Day/Night Menu Tree SPECTRA IV LANGUAGE ENGLISH ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM SYSTEM INFORMATION DISPLAY SETUP SERIAL # XXXXXXXXXXXXXX PRESET LABEL 2 (SECS) DOME DRIVE MODEL XX-XXXX ZONE LABEL 2 (SECS) BACK BOX MEMORY AVAILABLE ZOOM 2 (SECS) SOFTWARE VERSION XX.X AZIMUTH/ELEVATION 2 (SECS) BUILD DIRECTION OFF FONT VERSION XX.X ALARM MESSAGE 2 (SECS) COMM XXXXXXXXXX DATE/TIME ON D ADDRESS 1 EVENT LABEL 2
ページ18に含まれる内容の要旨
DOME SETTINGS * POWER UP LINE SYNC PRESETS MOTION DETECTION EDIT DETECTION AREAS POWER UP ACTION AUTO LINE SYNC ON PRESET NUMBER MOTION DETECTION ENABLED DETECTION AREA 1 LINE SYNC PHASE 0 ***PRESET NOT DEFINED*** LOCATION 0 ACTIVATE AUX SENSITIVITY MEDIUM AUX T
ページ19に含まれる内容の要旨
Language SPECTRA IV LANGUAGE ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, Portuguese, Russian, Polish, Turkish, and Czech. The factory default language is English. To change the display language: 1. Use the joystick to position the cursor beside LANGUAGE. 2. Press Iris Open. The cursor moves to the right
ページ20に含まれる内容の要旨
System Information SPECTRA IV SYSTEM INFORMATION ADDITIONAL SERIAL # FREE MEMORY LANGUAGE DOME DRIVE MODEL LAST RESET BACK BOX MEMORY AZIMUTH ZERO OFFSET SOFTWARE VERSION MOTOR ACTIVE BUILD CAMERA ACTIVE ACK ALERT* FONT VERSION VIDEO LEVEL CAMERA MODEL RESET CAMERA COMM LANGUAGE 1 CYCLE CAMERA POWER D ADDRESS LANGUAGE 2 REBOOT SYSTEM P ADDRESS LANGUAGE 3 CM9500 MODE LANGUAGE 4 EXIT 32 PRESETS LANGUAGE 5 PROTOCOL LANGUAGE 6 PRESS