ページ1に含まれる内容の要旨
Outdoor Cube
IP8336W Network Camera
User’s Manual
1MP • Day & Night • Weather-proof • 802.11n WLAN
Rev. 1.0
ページ2に含まれる内容の要旨
VIVOTEK Table of Contents Overview ����������������������������������������������������������������������������������������������������������������������������������������������������� 4 Revision History �������������������������������������������������������������������������������������������������������������������������������������� 4 Read Before Use ����������������������������������������������������
ページ3に含まれる内容の要旨
VIVOTEK URL Commands for the Network Camera ������������������������������������������������������������������������������������������������ 119 Technical Specifications ��������������������������������������������������������������������������������������������������������������������������� 200 Technology License Notice �������������������������� ��������������������������������������������������������������������������������������������� 201 Electromagnetic Compatibility (EMC) �������������
ページ4に含まれる内容の要旨
VIVOTEK Overview VIVOTEK IP8336W is a compact cube camera designed for indoor/outdoor surveillance� The stylish design makes it the best choice for settings such as boutique stores, department stores, or museums� Equipped with a 1MP sensor enabling viewing resolution of 1280x800 at a smooth 30 fps, the IP8336W is an all-in-one outdoor camera capable of capturing high quality, high resolution video� Incorporating an IR-cut filter that can be removed automatically at night and built-in IR i
ページ5に含まれる内容の要旨
VIVOTEK Read Before Use The use of surveillance devices may be prohibited by law in your country� The Network Camera is not only a high-performance web-ready camera but can also be part of a flexible surveillance system� It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use� It is important to first verify that all contents received are complete according to the Package Contents listed below� Take note of the
ページ6に含まれる内容の要旨
LED Definitions VIVOTEK Physical Description Front Panel Antenna Antenna Light Sensor Lens IR LEDs behind Microphone panel Status LED Item LED status Description 1 Steady Red Powered and system booting, or network failed 2 Blue LED blinks every 0�15 sec� Searching for WPS 3 Green LED blinks every 1 sec� Network connected to an AP 4 Green and RED blink consecutively every Upgrading firmware 0�15 sec� 5 Steady Blue Operating in camera default AP mode 6 Orange blinks every 0�15 sec� Restoring
ページ7に含まれる内容の要旨
VIVOTEK Bottom View Reset button MicroSD/SDHC WPS button Card Slot NOTE: An antenna comes with the camera� Install it by turning clockwise to attach to the connector� User's Manual - 7
ページ8に含まれる内容の要旨
VIVOTEK Digital Input Diagram Please refer to the following illustration for the connection method� Max. voltage: 40V 3.3V DI+ Digital input DI- DI-: Ground Connect a digital input device to the input pins of the camera� From the Applications > DI and DO page, you can let camera report the current signal status as High or Low, Open or Ground- ed, to determine the signal’s Normal status during operation � 8 - User's Manual
ページ9に含まれる内容の要旨
VIVOTEK Hardware Reset Reset Button The reset button is used to reset the system or restore the factory default settings� Sometimes resetting the system can return the camera to normal operation If � the system problems remain after reset, restore the factory settings and install again� Reset: Press and release the reset button. Wait for the Network Camera to reboot. Restore: Press and hold the recessed reset button until the status LED rapidly blinks. Note that all settings will be restore
ページ10に含まれる内容の要旨
VIVOTEK Installation Power Connection 1� If you have external devices such as a sensors and alarm, make connections from the digital input connector� DI+ DI- 2 Connect the power line to the power adaptor � � IMPORTANT: 1 Record the MAC address before installing the camera � � IP8336W 0002D10766AD 2. When you encounter configuration errors, you can press the WPS button for 5 seconds to restore network settings until the LED lights blue � The camera will then resume the original AP mode.
ページ11に含まれる内容の要旨
VIVOTEK Wireless Connection #1: Using the WPS Button 1� Make sure your AP (Access Point) and Operating System support WPS (Wi-Fi Protected Setup) functions WPS enables easy setup with compatible � APs � 2� Use the included hex wrench to open the bottom cover � When powered on, the camera LED should light red for a minute, and then turn blue� When lit blue, the camera operates in the AP mode� 3� Use the hex wrench to press the WPS button for 1 second� The LED will blink blue� 4� Press and
ページ12に含まれる内容の要旨
VIVOTEK Wireless Connection #2: Connection without WPS If not using the WPS method, you can manually configure the camera: 1� Connect power to the camera� By default, the camera operates in the AP mode Connect � to the camera using a Wi-Fi capable notebook or a computer with a wireless adaptor � Open the internet dialog box by clicking the wireless networks icon on the system tray � 1 AP mode 2 VIVOTEK (1C:CC) Client mode 3 AP 2� Right-click or double-click on the VIVOTEK (MAC addr) icon� Th
ページ13に含まれる内容の要旨
VIVOTEK You can also discover the camera using the IW2 utility Install the IW2 � utlity from the included product CD� 3� Enter your wireless AP's SSID and security password to connect to an existing AP � You may also use the "Search your AP" button to locate an AP of your preferrence. Click on an AP to make the connection� Select the security encryption, such as WEP or WPA-PSK, the algorithm, and enter the pre-share key� Click Save to proceed � The camera will then operate in the Cl
ページ14に含まれる内容の要旨
VIVOTEK 4� Open the IW2 utility� The camera will be assigned with a new IP address Double-click � on it to start a web session� The camera LED will start blinking green by every second� 5� A browser session with the Network Camera should prompt as shown below� 6� You should be able to see live video from your camera Y � ou may also install the 32-chan - nel recording software from the software CD in a deployment consisting of multiple cam- eras F � or its installation details, please refer to
ページ15に含まれる内容の要旨
VIVOTEK Wireless Connection #3: Initial Setup Using a Cell Phone 1� Connect power to the camera Search for the camera in the Wi-Fi Networks � � The camera ® initially operates in the AP mode� Screen captures have been taken from an iPhone � 2� Once connected, you should connect the camera to another AP� You should open a browser, enter the camera's default IP (192.168.1.1) in the URL field. When connected, manually enter the SSID and security code for access to another AP, or use the "S
ページ16に含まれる内容の要旨
VIVOTEK 4� Open the IW2 utility on a PC or laptop located in the same subnet of the camera� The camera will be assigned with a new IP address by the AP Double-click on it to start a web session � � Installing Camera 1� Drill holes on a wall or ceiling� 2� Insert the plastic anchors, and then mount the camera stand by driving the included screws� 3 Close and secure the bottom cover if you opened it � 4 � � Attach the camera by turning it around the threaded mount� 5� Adjust the camera's shoo
ページ17に含まれる内容の要旨
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Internet connection via a router Before setting up the Network Camera over the Internet, make sure you have a router and follow the steps below� 1 Connect your Network Camera � behind a router, the Internet environment is illustrated below � Regarding how to obtain your IP address, please refer to Software Installation on page 18 for details� IP address : 192.168.0.3 WAN (Wide Area Network ) Subnet mask : 255.255.255.0 Router IP addres
ページ18に含まれる内容の要旨
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN� IW2 1� Install IW2 under the Software Utility directory from the software CD � Installation Double-click the IW2 shortcut on your desktop to launch the program� Wizard 2 2� The program will conduct an analysis of your network environment� After your network environment is analyzed, please click Next to continue the program� 3 �
ページ19に含まれる内容の要旨
VIVOTEK Ready to Use 1� A browser session with the Network Camera should prompt as shown below� 2� You should be able to see live video from your camera� You may also install the 32-channel recording software from the software CD in a deployment consisting of multiple cameras For � its installation details, please refer to its related documents� User's Manual - 19
ページ20に含まれる内容の要旨
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software� Using Web Browsers Use Installation Wizard 2 (IW2) to access the Network Cameras on LAN. If your network environment is not a LAN, follow these steps to access the Netwotk Camera: ® 1� Launch your web browser (e�g�, Microsoft Internet Explorer or Mozilla Firefox). 2. Enter the IP address of the Network
