ページ1に含まれる内容の要旨
Quick Installation Guide
TV-IP110
TV-IP110W
H/W: A1.0R
ページ2に含まれる内容の要旨
Table of Contents Table of Contents English ...................................................................................................... 1 1. Before You Start ................................................................................. 1 2. Hardware Installation ......................................................................... 3 3. Configure the Internet Camera .......................................................... 4 9 Troubleshooting ........................
ページ3に含まれる内容の要旨
1. Before You Start Package Contents ? TV-IP110/TV-IP110W ? Utility CD-ROM ? Quick Installation Guide ? 1 x 2dBi Detachable Antenna (TV-IP110W) ? AC Power Adapter (5V, 2.5A) System Requirements ? 10/100Mbps Ethernet ? CPU: 1GHz processor or above ? Memory: 256MB RAM or above/ 512MB RAM or above (Windows Vista) ? Windows 2000/XP/Vista ? VGA Resolution: 800 x 600 or above ? Web Browser: Internet Explorer (6.0 or higher) 1 English
ページ4に含まれる内容の要旨
Application Internet Camera Server (TV-IP110) Cable/DSL 4-Port Broadband Router (TW100-S4W1CA) Internet Notebook with PC Card Modem (TE100-PCBUSR) 10/100Mbps Wireless Internet Camera Server (TV-IP110W) Wireless G Firewall Router (TEW-432BRP) Internet Notebook with Modem Wireless G PC Card (TEW-421PC) 54Mbps 2 English
ページ5に含まれる内容の要旨
2. Hardware Installation 1. Attach the Antenna. (TV-IP110W) 2. Connect a RJ-45 network cable from a Switch/Router to the Ethernet port of the Internet Camera Server. 3. Connect the AC Power Adapter to the Internet Camera Server and then to a power outlet. 4. Verify the Power and Link LEDs are on. 3 English
ページ6に含まれる内容の要旨
3. Configure the Internet Camera Note: 1. It is recommended that you configure the Internet Camera from a wired computer. 2. If you would like to use SecurView software, please refer to the User's Guide on the CD for more information. 1. Insert the Utility CD-ROM into your CD-ROM drive and then click IP Setup. 2. Follow the Installation Wizard instructions and then click Close. 3. Go to Start -> Programs -> TRENDnet -> IPSetup and click IPSetup. Note: By default, the IP setting on th
ページ7に含まれる内容の要旨
5. Configure the IP address to be in the same subnet as your network, type in the Administrator ID and Password and click Change. By default: ID: admin Password: admin 6. Click OK and wait 30 seconds. 7. Click OK. 8. Double click the IP Camera to access the browser configuration. 5 English
ページ8に含まれる内容の要旨
9. Enter the User name and Password, and then click OK. User Name: admin Password: admin 10. Right click and select Install ActiveX Control. 11. Click Install. 12. Click Setup, Network and then click Wireless. (TV-IP110W only) 6 English
ページ9に含まれる内容の要旨
13. Click Site Survey. Select your wireless network. If encryption is enabled, select the proper Authentication type, enter the Pre-Shared Key and then click Apply. (Example shows WPA2- PSK. If your wireless network does not support WPA, select open or shared instead. Contact your network administrator for more information) (TV-IP110W only). 14. Disconnect the RJ-45 cable and unplug the power. Then plug the power back in (TV-IP110W). Note: The TV-IP110W will not work wirelessly u
ページ10に含まれる内容の要旨
16. Click Live View. Your installation is now complete. Note: For detailed information regarding the TV-IP110/TV-IP110W configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com. Register Your Product To ensure the highest level of customer service and support, please take a moment to register your product Online at: www.trendnet.com/register Thank you for choosing TRENDnet 8 English
ページ11に含まれる内容の要旨
Troubleshooting Q1: IP Setup is unable to detect my camera. What should I do? A1: First, verify that you have followed all the steps in the Section 2: Hardware Installation. Second, disable any software firewall programs such as ZoneAlarm or Norton Internet Security. If you are using Windows XP or Windows Vista, disable the built in firewall. Third, click on Search in the IPSetup setup wizard. Q2: I do not have a DHCP server or DHCP is disabled on my network and I am unable to configur
ページ12に含まれる内容の要旨
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling
ページ13に含まれる内容の要旨
Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register 20675 Manhattan Place Torrance, CA 90501 USA Copyright ©2008. All Rights Reserved. TRENDnet.
