ページ1に含まれる内容の要旨
®
Instruction Manual
CVC-614C High Resolution Color Camera
and
CVC-865DN/24 High Resolution Color
Camera With Mechanical IR Cut Filter
200 New Highway
Amityville . NY . 11701
1-800-645-5516
Fax: 631.957.9142 or 631.957.3880
www.specotech.com
Speco Technologies CVC-614C : CVC-865DN/24
1
Instruction Manual
ページ2に含まれる内容の要旨
CONTENTS Introduction FCC Information --------------------------------------------------------------------2 Warning -------------------------------------------------------------------------------2 About this Manual ------------------------------------------------------------------3 Dimensions --------------------------------------------------------------------------3 Features ------------------------------------------------------------------------------
ページ3に含まれる内容の要旨
Introduction ♦ FCC Information This equipment has been tested and found to comply with the limits of a class A digital device, pursuant to part 15 of the FCC rules and also guaranteed with CE approval. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferen
ページ4に含まれる内容の要旨
♦ About this Manual This user manual covers the following models listed below. Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later use. ♦ Dimensions (Unit: mm): ♦ Features Accepts C or CS mount lens. Low light, high sensitivity. DC/Video Drive Back Focus Available in Selected Models AGC (Automatic Gain Control) Back light compensation. External Sync.(Line Lock) Day & Night (Remova
ページ5に含まれる内容の要旨
Camera Functions ♦ Parts Descriptions 1. C mount lens ring adapter. If you are using a CS mount lens, remove the C mount lens ring adapter. 2. Flange back adjusting ring If back focus adjustment is required, loosen the flange back locking screw, and adjust back focus by rotating the ring. 3. Mounting bracket screw hole (1/4" -20 UNC)(top) 4. Auto iris lens connector (mini jack) 5. Video output terminal (BNC) 6. Power supply indicator
ページ6に含まれる内容の要旨
Camera Functions ♦ Function Description 1. Auto Electronics Shutter (AES) When using a DC Drive or Video Drive Auto Iris Lens, turn off the AES. When a Fixed Iris or Manual Iris Lens is used, turn the AES on to adjust the shutter speed automatically. 2. Automatic Gain Control (AGC) AGC can automatically amplify the digital signal to adjust are for the difference of light level. 3. Auto Tracking White Balance (ATW) / Auto White Balance (AWB) When the color difference is too obvious
ページ7に含まれる内容の要旨
♦ DIP Switch Control Function Format Description For stabilizing the image LL LL - IN Use the ( ) button to adjust. IN Initial setting is IN. OFF Normal:1/60 (1/50) OFF-AES NTSC:1/60~1/100000 AES mode PAL:1/50~1/100000 BLC ON BLC-OFF OFF BLC OFF. OFF AGC OFF. OFF-AGC Turn it on in the dark environment to get AGC clear image. Use to change shutter speed under flicker state. NTSC:1/120 FLC PAL:1/100 FLC-OFF Note: Can only be used when AES is on. OFF FLC OFF H When the
ページ8に含まれる内容の要旨
Camera Functions ♦ Color Temperature Chart (White Balance) Light Sources Degrees (°k) Summer Skylight 12000 – 25000°k Daylight Shade 10000°k Skylight 8000~10000°k Overcast 6500~7500°k Studio Electronic Flash 6500°k Daylight/ Auto Flashlight 5500°k Fluorescent bulbs 4200~5000°k Cool white- fluorescent bulbs 4500°k Warm white- fluorescent bulbs 3500°k Studio Lights 3400°k Professional Tungsten photo lamp 3200°k Household bulb 2700~3200°k Sunrise、 Sunset 2000~3000°k Candle
ページ9に含まれる内容の要旨
Installation Guide ♦ Installing the lens 1. Remove the lens cap from the front of the camera. 2. If you are using a C mount lens, screw the lens directly into the camera. 3. If you are using a CS mount lens, remove the C mount lens ring adapter. 4. When using a fixed iris lens, switch the shutter control to AES ON. 5. When using a manual adjustable iris lens, switch the shutter control to AES OFF. 6. When using a Video servo auto iris lens or DC servo auto iris lens, switch the shutt
ページ10に含まれる内容の要旨
Installation Guide ♦ Connections 1. Keep the cameras' power OFF during the installation. 2. Ensure that the input voltage is correct for the plug pack; both the camera and the plug pack may be damaged if the voltage is incorrect. 3. Terminate the camera output to 75 ohms. Use 75-ohm coaxial cable (RG-59/U, RG-6/U, RG-11/U). Always set the last monitor termination switches to 75 ohms, and set the termination switches of intermediate monitors to HIGH (HI-Z)
ページ11に含まれる内容の要旨
Specifications ♦ Color HQ-1 Camera Item CVC-614C CVC-865DN/24 Description 1/3" Color HQ1 Camera 1/3" Color HQ1 Camera with ICR (Mechanical IR Cut Filter) DSP Sony HQ1 Pick up Element Sony Super-HAD CCD Image Sensor Number of Pixels 768 (H) × 494 (V) Auto Electronics Shutter ON-OFF AGC ON-OFF ALC Low-High WB ATW/ MWB (PUSH-HOLD) 3200°k/ 4200°k/ 4700°k/ 6200°k Back Light Compensation ON-OFF FLC ON-OFF Line Lock* IN-LL Sync. Mode Internal Sync. Scanning System 2:1 Int
ページ12に含まれる内容の要旨
® Speco Technologies 200 New Highway Amityville . NY . 11701 1-800-645-5516 Fax: 631.957.9142 or 631.957.3880 www.specotech.com CR300000209 Speco Technologies CVC-614C : CVC-865DN/24 12 Instruction Manual
