ページ1に含まれる内容の要旨
IR LED Bullet Cameras
Manual
(42-LED version shown)
# of
NTSC Model # PAL Model # Lens Resolution OSD*
IR LEDs
EV-1186-N3GQ EV-1186-P3GQ 3.6mm 480 TV lines 30 No
EV-1806-N3GQ EV-1806-P3GQ 3.6mm 600 TV lines 30 Yes
EV-1196-N6GQ EV-1196-P6GQ 6.0mm 480 TV lines 42 No
EV-1816-N6GQ EV-1816-P6GQ 6.0mm 600 TV lines 42 Yes
EV-1196-NKGQ EV-1196-PKGQ 2.8~12mm 480 TV lines 42 No
EV-1816-NKGQ EV-1816-PKGQ 2.8~12mm 600 TV lines 42 Yes
*OSD functions are only accessible via opt
ページ2に含まれる内容の要旨
ENFORCER IR LED Bullet Cameras Specifications: EV-1196-N6GQ EV-1816-N6GQ NTSC EV-1186-N3GQ EV-1806-N3GQ EV-1196-NKGQ EV-1816-NKGQ Model # EV-1196-P6GQ EV-1816-P6GQ PAL EV-1186-P3GQ EV-1806-P3GQ EV-1196-PKGQ EV-1816-PKGQ Type IR LED Bullet Camera 1 CCD / ” Sony Super HAD II 3 # of infrared LEDs 30 42 Resolution 480 TV lines 600 TV lines 480 TV lines 600 TV lines Pickup NTSC 510x492 pixels 768x494 pixels 510x492 pixels 768x494 pixels elements PAL 500x528 pixels 752x582 pixel
ページ3に含まれる内容の要旨
ENFORCER IR LED Bullet Cameras Overview: Mounting base Sunshield screw Sunshield Surface mount Female BNC connector Mounting arm knock-out adjustment screw Remove with a pair of pliers DC Plug with terminal block Mounting Adjustment Camera angle DC jack adjustment screw arm screw Zoom* Focus* Adjustment nut *EV-1196-NKGQ and EV-1816-NKGQ only. ENFORCER IR LED Bullet Cameras can be mounted to a standard lamp holder cover plate (not included). Unscrew the mou
ページ4に含まれる内容の要旨
ENFORCER IR LED Bullet Cameras Troubleshooting: Check that the camera is powered up. Check that the power supply’s polarity is correct. The screen is blank. Check that the monitor is powered up. Check that the video cable connecting the camera to the monitor is connected properly. Clean the lens using a soft, clean cloth. The screen image is dim. Check that the light source is adequate. Adjust the monitor’s contrast knob. The screen image has poor contrast. Chan
