ページ1に含まれる内容の要旨
EV-2240-N3B (NTSC)
EV-2240-P3B (PAL)
Mini Indoor Dome Camera
Manual
7
480 TV lines Small 3 / ” (88mm) diameter
16
3.6mm lens High dynamic range produces
images with accurate colors
Automatic gain control
Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.
ページ2に含まれる内容の要旨
ENFORCER Mini Indoor Dome Camera Specifications: EV-2240-N3B EV-2240-P3B Type Mini Indoor Dome Camera 1 Image sensor / ” CMOS 4 Resolution 480 TV lines Lens size 3.6mm Pickup elements 510x492 pixels 500x582 pixels Sync Internal Video output 1Vp-p composite video, 75Ω Video output format NTSC PAL S/N ratio >48dB Shutter control (AES) 1/60~1/100,000 s 1/50~1/100,000 s Gamma correction 0.45 Gain control Auto Minimum illumination 0.01 Lux/F2.0 Operating voltage 12VDC ±10%
ページ3に含まれる内容の要旨
ENFORCER Mini Indoor Dome Camera Overview: Mounting screws Female BNC connector (not included) DC plug with Dome cover Camera DC jack terminal block (not included) Before Starting: 1. Please read this manual carefully and keep it 5. Do not drop the camera or subject it to for future reference. strong vibrations. 2. Use the camera within given temperature and electricity limits. Note: Many video monitors produce strong 3. Do not point the camera at the sun.
ページ4に含まれる内容の要旨
ENFORCER Mini Indoor Dome Camera Troubleshooting: Check that the camera is powered up. Check that the power supply’s polarity is correct. The screen is blank. Check that the monitor is powered up. Check that the video cable connecting the camera to the monitor is connected properly. Clean the lens using a soft, clean cloth. The screen image is dim. Check that the light source is adequate. Change the position of the camera. The screen image has poor contrast. The screen image
