ページ1に含まれる内容の要旨
ENG RUS POL
SNC-M300
SNC-M300
user manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive
more complete service, please register your product at
www.samsung.com/global/register
Cover-M300_AB68-00721E-01.indd 1 2008-11-13 오후 9:44:19
ページ2に含まれる内容の要旨
safety precautions CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. WARNING • To reduce the risk of fire or
ページ3に含まれる内容の要旨
8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fire or electric shock. 9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) 10. When cleaning, do not spray
ページ4に含まれる内容の要旨
important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polariz
ページ5に含まれる内容の要旨
contents 03 Features Preparation 03 Precautions – Installation and Use 04 Recommended PC Specifications 04 Compatible IP Routers 03 04 Compatible PoE Switches 04 Checking the components in the package 05 Names of each part Installation and Connection 08 Installing the Camera 12 Connecting 08 Network Connection & Setup 18 Connecting the camera to an IP router with local area networking 20 Connecting the camera directly to local area networking 17 21 Searching for the camera 22 Manual Network Se
ページ6に含まれる内容の要旨
28 Connecting to the camera Using the Camera 30 Installing ActiveX 32 Using the Viewer Screen 36 Using the Search Viewer Screen 28 37 Setting the camera Setting Up 39 Basic Configuration 45 System configuration 50 Layout Configuration 37 51 Event Configuration 58 Network Configuration Appendix 60 Troubleshooting 62 Specifications 60 02_ Contents NA-M300-ENG_AB68-00721A.indd 2 2008-11-17 오후 5:33:03
ページ7に含まれる内容の要旨
01 PREPARATION preparation FEATURES Various Communication Protocol Support This product supports various communication protocols such as ARP, HTTP and DHCP as well as TCP/IP, UDP, RTP/RTSP, SMTP for Email transmission and FTP protocol. Monitoring Through Web Browser Monitoring Through Web Browser This product enables watching a video through an Internet web browser so that you can watch a video through the Internet as you can within the local network. Automatic Local IP Setting Function This
ページ8に含まれる内容の要旨
RECOMMENdEd PC SPECIFICATIONS CPU: Pentium4/2.4GHz or higher Operating System: Windows XP(Service Pack2) / Windows Vista Resolution: 1024X768 pixels or higher RAM: 512MB or higher Web Browser: Internet Explorer 6.0 or higher Video Card: Radeon, Nvidia Video Memory: 128MB DirectX 8.1 or higher COMPATIBlE IP ROUTERS Linksys D-Link Netgear COMPATIBlE POE SWITChES Linksys SRW224G4P D-Link DES-1316 SMC SMCPWR-INJ3 ChECkING ThE COMPONENTS IN ThE PACkAGE Make sure that the following items
ページ9に含まれる内容の要旨
01 PREPARATION NAMES OF EACh PART Front 1 1 Adjust Back Focus by moving this bar up or down. Back Focus Adjustment Bar When the camera lens becomes dirty, softly clean it with a lens tissue or a cloth soaked in pure ethanol. Preparation _05 NA-M300-ENG_AB68-00721A.indd 5 2008-11-17 오후 5:33:03
ページ10に含まれる内容の要旨
Rear 1 3 2 4 6 7 8 5 1 Audio Out For outgoing audio signals. 2 Audio In For incoming audio signals. 3 SDHC Memory Card Slot This is where you insert your SDHC memory card. System, SD, and Power These indicators provide system, SD, and power status 4 Indicators information. Used to connect the camera to an external device. A_IN 1 and 2: These are alarm in ports. 5 I/O Port GND: This is the GND port. A_OUT 1 and 2: These are alarm out ports. NOT USED: This port is not used. Reverts all camera
ページ11に含まれる内容の要旨
01 PREPARATION 7 Ethernet Port Ethernet cable port. Connect the power cable to this port. L E D S t a t u s D e s c r i p t i o n When the power is switched on and the Turns on network connection is normal. When the DDNS setting fails. When the DDNS is being set. Flashes SYSTEM When the network connection is not stable. When the power is switched off. Turns off When the camera is rebooting. When the memory card is inserted and 8 Power Port Turns on the system is in normal operation. When rec
ページ12に含まれる内容の要旨
installation and connection INSTAllING ThE CAMERA Disconnect the power cord before installation or relocation. Mounting the lens When using the CS lens CS lens Mount the CS lens by rotating it clockwise as shown in the picture. When using the C lens C lens After mounting the C-mount adapter by rotating it clockwise, turn the C lens clockwise until it is fixed as shown in the picture. Installation and Connection 08_ NA-M300-ENG_AB68-00721A.indd 8 2008-11-17 오후 5:33:03
ページ13に含まれる内容の要旨
02 INSTAll ATION ANd CONNECTION Adjusting the back focus The back focus of the camera is adjusted at the factory before delivery but some lenses can be out of focus depending on the lens type. In this case, you have to adjust the back focus. The following describes how to adjust the back focus of the lenses. In case of the lens with no zooming function After exposing the camera to an object with high resolution (like a dart-patterned image) 1 at a distance of more than 10m, set the lens fo
ページ14に含まれる内容の要旨
Inserting/Removing an SdhC Memory Card Inserting an Sdh C Memory Card Push the SDHC memory card in the direction of the arrow shown in the diagram. Do not force the memory card in. If you can’t insert the memory card into the slot with ease, you might be inserting the card in the wrong direction. Forcibly inserting a memory card could lead to its damage. Removing an Sdh C Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card fro
ページ15に含まれる内容の要旨
02 INSTAll ATION ANd CONNECTION Memory Card Information (not included) What is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’s suitable for you Your camera supports SDHC memory cards. You may, however, experience compatibility issues depending on the model and make of the memory card. Your camera supports SD memory cards.
ページ16に含まれる内容の要旨
CONNECTING Connecting Ethernet Cable Connect the Ethernet cable to the network port as shown. Installation and Connection 12_ NA-M300-ENG_AB68-00721A.indd 12 2008-11-17 오후 5:33:04
ページ17に含まれる内容の要旨
02 INSTAll ATION ANd CONNECTION Connecting Power Connect the power adapter to the camera’s power port. 1 Using a flathead screwdriver, connect the two lines leading from the power adapter to the 2 camera’s power port. Connect the power cord to the power adapter unit. 3 Connect the power plug to a power outlet. 4 Beware of DC 12V’s polarity charges when making the connection. If you are using a PoE (Power over Ethernet) supporting router, you do not need a separate power source. Inst
ページ18に含まれる内容の要旨
To connect input and output ports: Connect alarm lines to the input and output ports on the rear. A_IN 1, A_IN 2 : These are alarm in ports. GNd : This is the GND port. A_OUT 1, A_OUT 2 : These are alarm out ports. Alarm In/Out Connection diagram A_IN1 1 A_IN2 2 GND 3 External Relay A_OUT1 4 External Relay A_OUT2 5 Not Used 6 Installation and Connection 14_ NA-M300-ENG_AB68-00721A.indd 14 2008-11-17 오후 5:33:04
ページ19に含まれる内容の要旨
02 INSTAll ATION ANd CONNECTION Connecting to Audio Input/Output Microphone LINE-IN LINE-OUT Speaker Microphone Pre-Amp Pre-Amp C onnect the AUDIO IN port of the camera with the microphone directly or LINE OUT 1 port of the amplifier that the microphone is connected to. direct Mic Connection: Set Audio Input Gain high (10). (Refer to page 39) l ine Out Connection: Set Audio Input Gain low (1). (Refer to page 39) Connect the AUDIO OUT port of the camera with the LINE IN port of the speaker. 2
ページ20に含まれる内容の要旨
Audio I/O Block diagram PC Microphone Microphone Pre-Amp Pre-Amp Speaker Audio Codec G.711 PCM, - μ law 64kbps 8kHz sampling Full duplex Audio Audio in Used for mono signal line input (Max.2.4 Vpp) Audio out Used for mono signal line output (Max.2.4 Vpp) l ine out impedance 600ohm Installation and Connection 16_ NA-M300-ENG_AB68-00721A.indd 16 2008-11-17 오후 5:33:04
