ページ1に含まれる内容の要旨
SNB-3000(P)
Network Camera
User Manual
imagine the possibilities
Thanks you for purchasing this Samsung product.
To receive a more complete service, please visit
our website
www.samsungsecurity.com
RoHS compliant
Our product complies with “The Restriction Of the use of certain Hazardous
Substances in electrical and electronic equipment”, and we do not use the
6 hazardous materials- Cadmium (Cd), Lead (Pb), Mercury (Hg), Hexavalent
+6
Chromium (Cr ), Poly Brominated Biphenyls (PBBs), Poly Bro
ページ2に含まれる内容の要旨
overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER CAUTION SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. WARNING To reduce the risk of fire or ele
ページ3に含まれる内容の要旨
● oveRvIeW 5. When installing the camera, fasten it securely and firmly. The fall of camera may cause personal injury. 6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects. 7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock. 8. If any unusual smells or smoke come from the un
ページ4に含まれる内容の要旨
overview CAUTIoN 1. Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. 2. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity. Doing so may cause fire or electric shock. 3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it. 4. Remove the power plug from the outlet whe
ページ5に含まれる内容の要旨
● oveRvIeW FCC STATemeNT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. CAUTIo N This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protect
ページ6に含まれる内容の要旨
overview ImpoRTANT SAFeTy INSTRUCTIoNS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the p
ページ7に含まれる内容の要旨
● oveRvIeW CoNTeNTS 6 Important Safety Instructions overview 9 Product Features 9 Precautions – Installation And Use 2 9 Recommended Pc Specifications 10 What’s Included 11 At a Glance 14 Mounting the lens installation & 15 Inserting/Removing an SD connection Memory car d 16 Memory card Information (not included) 14 18 connecting with other Device 22 How to use the menu key camera setup 23 Main Menu 23 Profile 24 camera Setu p 22 28 Privacy Zone 29 Others 30 System Info 30 Language 31 c
ページ8に含まれる内容の要旨
overview 42 connecting to the camer a web viewer 43 Login 44 Installing Activex 45 Using the Live Screen 42 46 Backup 49 Using the SD Search Viewer Screen 50 Accessing the Setup screen setup screen 50 Default Setup 55 System Setup 58 Overlay Setup 50 59 Event Setup 66 Network Setup 67 Profile appendix 68 Terminology 70 Specifications 74 Frame Rate (NTSc ) 67 80 Frame Rate (PAL) 86 Troubleshooting _ overview
ページ9に含まれる内容の要旨
● oveRvIeW pRodUCT FeATUReS Support various communication protocols Supports TCP/IP, UDP, RTP/RTSP, SMTP for email, and FTP protocols as well as various internet protocols such as ARP, HTTP, HTTPS and DHCP. Web Browser-based monitoring Using the Internet web browser to display the image in a local network environment. Automatic Local Ip Setup Even a network novice can install it with minimum operations. Alarm If an alarm sensor is connected and it detects a motion, a message is sent to
ページ10に含まれる内容の要旨
overview Compatible Ip Routers Linksys D-Link Netgear Compatible poe Switches Linksys SRW224G4P D-Link DES-1316 SMC SMCPWR-INJ3 WhAT’S INCLUded Please check if your camera and accessories are all included in the product package. C Mount Adapter Camera Holder (Mount) Camera Auto Iris Lens Connector & Screws (2EA) User Manual/ User Manual IP INSTALLER DVD Lens options CS Lens C Lens 10_ overview
ページ11に含まれる内容の要旨
● oveRvIeW AT A GLANCe Front Side Item Description Camera Holder Used when you mount the camera onto the bracket by fixing the camera (Mount) Holes holder (mount) adaptor with the bracket. Auto Iris Lens Installed on the lens adaptor. (Optional) Auto Iris Lens Used to supply power and output signal to control the iris of the lens. Connector Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied M ethanol. English _11
ページ12に含まれる内容の要旨
overview Rear Side AUDIO OUT AUDIO IN SD CARD SD SYSTEM POWER VIDEO RESET NETWORK 1 2 3 4 5 1,2 : ALARM IN 1,2 ACT LINK AC 24V 3 : GND DC 12V GND 4,5 : ALARM OUT 1,2 Item Description SD Memory Card Compartment for the SD memory card. Compartment AUDIO OUT Terminal for audio output. Audio Out terminal AUDIO IN Terminal for audio input. ON: A memory card is inserted and operates normally. Flashing: F ailed to record, insufficient space, or inserted SD abnormally. OFF: Camera is off, came
ページ13に含まれる内容の要旨
● oveRvIeW Resets the camera settings to the default. Press and hold it for about 3 Reset Button seconds to turn off the system indicator and restart the system. Power Port Used to plug the power cable. GND Used for earth-grounding. Network Port Used to connect to the Network cable. ALARM IN Used to connect the alarm input signal. 1,2 I/O Port GND Used for earth-grounding. ALARM OUT Used to connect the alarm output signal. 1,2 Video Out Port Video signal output port connected to the monitor.
ページ14に含まれる内容の要旨
installation & connection moUNTING The LeNS Disconnect the power before proceeding. mounting the CS lens Turn the optional CS lens clockwise to insert it. CS Lens mounting the C lens Turn the C mount adaptor clockwise to insert it and do the same with the C lens. C Lens 1_ installation & connection
ページ15に含まれる内容の要旨
● INSTALLATIoN & CoNNeCTIoN Connecting the Auto Iris Lens connector Insert the lens connector into the corresponding hole of the camera. Focusing Turn the lens left or right to control the zoom and focus the lens so that you can view a clear, sharp object. INSeRTING/RemovING AN Sd memoRy CARd Inserting an Sd memory Card Push the SD memory card in the direction of the arrow shown in the diagram. Do not insert the SD memory card while it’s upside down by force. Otherwise, it may damage the J
ページ16に含まれる内容の要旨
installation & connection Removing an Sd memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the J slot when released. Before ejecting the SD memory card, release the checkbox in and press [Apply] button. (page 61) memoRy CARd INFoRmATIoN (NoT INCLUded) What is a memory card? The memory ca
ページ17に含まれる内容の要旨
● INSTALLATIoN & CoNNeCTIoN memory Card Use SD and SDHC memory cards feature a switch that disables writing data on to the media. Having this switch to the Lock position will prevent accidental deletion of data stored in the memory card but at the same time will also prevent you from writing data on to the media. ❖ memory Card Components Contacts Lock Switch SDHC English _1
ページ18に含まれる内容の要旨
installation & connection CoNNeCTING WITh oTheR devICe Monitor AUDIO OUT AUDIO IN SD CARD SD SYSTEM POWER VIDEO RESET NETWORK 1 2 3 4 5 1,2 : ALARM IN 1,2 ACT LINK AC 24V 3 : GND GND DC 12V 4,5 : ALARM OUT 1,2 Power Network Connecting to the monitor Connect the [vIdeo ] port of the camera to the video input port of the monitor. Network Connection Connect the Network cable to the local network or to the Internet. power Supply Use the screwdriver to connect each line of the power cable to t
ページ19に含まれる内容の要旨
● INSTALLATIoN & CoNNeCTIoN Connecting to Audio Input/output Microphone LINE-OUT LINE-IN Speaker Pre-Amp Pre-Amp Microphone 1. Connect the AUDIO IN port of the camera with the microphone directly or LINE OUT port of the amplifier that the microphone is connected to. direct mic Connection : Set Audio Input Gain high (10). (Refer to page 51) Line out Connection : Set Audio Input Gain low (1). (Refer to page 51) 2. Connect the AUDIO OUT port of the camera with the LINE IN port of the speaker.
ページ20に含まれる内容の要旨
installation & connection Audio I/o Block diagram PC Network Microphone Microphone Speaker Pre-Amp Pre-Amp Audio Codec G.711 PCM. μ-law 64kbps 8kHz sampling Full duplex Audio Audio in Used for mono signal line input (Max.2.4 Vpp) Audio out Used for mono signal line output (Max.2.4 Vpp) Line out impedance 600 Ω 0_ installation & connection
