ページ1に含まれる内容の要旨
Network Camera
SNB-5000/SND-5080/SND-5080F/SNV-5080
User Manual
Before installing and operating this product, please read this manual thoroughly.
English
ページ2に含まれる内容の要旨
overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat reaisters, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose o
ページ3に含まれる内容の要旨
OVERVIEW WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus CAUTION CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN : TO REDUCE THE RISK OF ELECTRIC SHOCK. CAUTION DO NOT REMOVE COVER (OR BACK). NO
ページ4に含まれる内容の要旨
overview Disconnection Device Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location. When used outside of the U.S., it may be used HAR code with fittings of an approved agency is employed. CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. The BNC
ページ5に含まれる内容の要旨
OVERVIEW Please read the following recommend safety precautions carefully. Do not Place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. Do not place this apparatus near. Do not attempt to service this apparatus yourself. Do not place a glass of water on the product. Do not install near any magnetic sources. Do not block any ventilation openings. Do not place heavy items on the product. User’s Ma
ページ6に含まれる内容の要旨
overview This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Op
ページ7に含まれる内容の要旨
OVERVIEW CONTENTS 2 Important Safety Instructions OVERVIEW 9 Product Features 9 Recomended PC Specifications 10 What’s Included 2 12 At a Glance (SNB-5000) 15 At a Glance (SND-5080) 18 At a Glance (SND-5080F) 21 At a Glance (SNV-5080) 24 Installation (SND-5080) INSTALLATION & CONNECTION 26 Installation (SND-5080F) 28 Installation (SNV-5080) 32 Mounting the Lens 24 33 Inserting/Removing an SD Memory Card 36 Memory Card Information (Not Included) 37 Connecting with other Device 42 Connecting the
ページ8に含まれる内容の要旨
overview 53 How to use the Menu Key CAMERA SETUP 53 Camera Menu Setup 53 62 Connecting to the Camera WEB VIEWER 63 Login 64 Installing Silverlight Runtime 66 Using the Live Screen 62 67 Using OSD Screen Menu 68 Playback 70 Setup SETUP SCREEN 70 Audio & Video Setup 73 Network Setup 77 Event Setup 70 83 System Setup 87 Camera Specification APPENDIX 89 Network Specification 91 Troubleshooting 93 GPL/LGPL Software License 87 8_ overview
ページ9に含まれる内容の要旨
OVERVIEW PRODUCT FEATURES HD Video Quality Supports up to 1.3 mega pixels of HD video quality. H.264/MPEG-4/MJPEG Multi-Streaming This network camera supports the H.264/MPEG-4/MJPEG codec and can display videos in different resolutions and qualities simultaneously with different Codecs. Support various communication protocols Supports TCP/IP, UDP, RTP/RTSP, email, and FTP protocols as well as various internet protocols such as ARP, HTTP, HTTPS and DHCP. Web Browser-based Monitoring Using t
ページ10に含まれる内容の要旨
overview WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Model Name User Manual/ 1 IP Installer DVD SNB-5000 User Manual 1 SND-5080/5080F SNV-5080 Used for connecting to the power Power Adapter 1 source Jack Modular 1 LAN cable gender Cable for the testing Used to test the camera connection SND-5080/5080F 1 monitor to a portable display device SNV-5080 Alarm Cable 1 Used to connect to Alarm I/O SND
ページ11に含まれる内容の要旨
OVERVIEW Appearance Item Name Quantity Description Model Name C Mount Adapter Auto Iris Lens 1 Used to install the camera lens Connector Camera Holder 1 Used to install the camera holder SNB-5000 (Mount) Camera Holder 2 Used to install the mount (Mount) Screws Used for installation on the wall or ASSY-Screw Tapping 4 ceiling L Wrench 1 Used to remove/fix the dome cover SNV-5080 For fixing a screw, Inserted in a hole Plastic Anchor 4 (reinforced anchoring force) Tapping Screw SND-5080F Bra
ページ12に含まれる内容の要旨
SNB-5000 www.samsungcctv.com overview AT A GLANCE (SNB-5000) Front Side Item Description Camera Holder Used when you mount the camera onto the bracket by fixing the camera (Mount) Holes holder (mount) adaptor with the bracket. Auto Iris Lens Installed on the lens adaptor. (Optional) Auto Iris Lens Used to supply power and output signal to control the iris of the lens. Connector Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied M ethanol. 12_ o
ページ13に含まれる内容の要旨
OVERVIEW Rear Side AUDIO OUT AUDIO IN SD CARD SD SYSTEM POWER VIDEO RESET NETWORK 1 2 3 4 5 1 : ALARM IN 4 : - ACT LINK AC 24V 2 : ALARM OUT 5 : GND DC 12V GND 3 : ALARM COM Item Description SD Memory Card Compartment for the SD memory card. Compartment AUDIO OUT Terminal for audio output. Audio terminal AUDIO IN Terminal for audio input. ON : A memory card is inserted and operates normally. Flashing : Failed to record, insufficient space, or inserted SD abnormally. OFF : Camera is
ページ14に含まれる内容の要旨
overview Resets the camera settings to the default. Press and hold it for about 5 seconds to turn off the system indicator and restart the system. Reset Button J Resetting the camera requires reconfiguration of network settings (IP address, subnet mask, gateway address etc.) using the IP Installer software application. Power Port Used to plug the power cable. GND Used for earth-grounding. Network Port Used to connect a PoE or LAN cable. ALARM IN Used to connect the alarm input signal. ALARM O
ページ15に含まれる内容の要旨
OVERVIEW AT A GLANCE (SND-5080) Appearance Item Description Dome Cover Dome cover for the lens and unit protection. Main unit Main unit includes the lens, switch board, PCB boards and screws. Power Port Used to plug the power cable. Video Out Port Video signal output port connected to the monitor. Network Port Used to connect a PoE or LAN cable. Audio In Jack Used to connect to a microphone. Audio Out Jack Used to connect to speakers. English _15
ページ16に含まれる内容の要旨
overview Inside 3 Item Description ALARM IN Used to connect the alarm input signal. ALARM OUT Used to connect the alarm output signal. Alarm In / Out terminals ALARM COM Common port where the alarm output signal is connected. GND Used for earth-grounding. SD Memory Card Compartment for the SD memory card. Compartment Resets the camera settings to the default. Press and hold it for about 5 seconds to turn off the system indicator and restart the system. Reset Button J Resetting the camera requ
ページ17に含まれる内容の要旨
OVERVIEW Components 1 3 4 2 5 6 7 8 Item Description Inner Cover Cover for the main unit’s protection. By lifting it while gently pressing the both ends, you can separate the inner Side wing hooks cover. Turn the barrel left or right to adjust the zoom, and turn the knob clockwise ZOOM lever to lock the zoom. Turn the barrel left or right to adjust the focus, and turn the knob clockwise Focus lever to lock the focus. SD Memory Card Compartment for the SD memory card. Compartment Using the t
ページ18に含まれる内容の要旨
overview AT A GLANCE (SND-5080F) Appearance Item Description Dome Cover Dome cover for the lens and unit protection. Main unit Main unit includes the lens, switch board, PCB boards and screws. Power Port Used to plug the power cable. Video Out Port Video signal output port connected to the monitor. Network Port Used to connect a PoE or LAN cable. Audio In Jack Used to connect to a microphone. Audio Out Jack Used to connect to speakers. 7 18_ overview
ページ19に含まれる内容の要旨
OVERVIEW Inside 3 Item Description ALARM IN Used to connect the alarm input signal. ALARM OUT Used to connect the alarm output signal. Alarm In / Out terminals ALARM COM Common port where the alarm output signal is connected. GND Used for earth-grounding. SD Memory Card Compartment for the SD memory card. Compartment Resets the camera settings to the default. Press and hold it for about 5 seconds to turn off the system indicator and restart the system. Reset Button J Resetting the camera req
ページ20に含まれる内容の要旨
overview Components 3 4 5 Item Description Inner Cover Cover for the main unit’s protection. By lifting it while gently pressing the both ends, you can separate the inner Side wing hooks cover. Turn the barrel left or right to adjust the zoom, and turn the knob clockwise ZOOM lever to lock the zoom. Turn the barrel left or right to adjust the focus, and turn the knob clockwise Focus lever to lock the focus. Using the test monitor cable, you can connect to a mobile display for camera Monitor
