ページ1に含まれる内容の要旨
9100 SERIES
VIEWSTATION AND RECORDER
Quick Start Guide
ページ2に含まれる内容の要旨
DX9100 Series A basic DX9100 system consists of a DX9100VS viewstation and a DX9100 recorder. The recorder has an internal storage unit. The DX9116H models record at a maximum of 15 ips with a hard drive between 500 GB and 1,500 GB . The DX9116F models record at a maximum of 30 ips with a hard drive between 500 GB and 1,500 GB. You can connect up to 16 cameras to the 16 video input coaxial connectors on the back of the recorder. CONNECTING THE EQUIPMENT Connect the viewstation to the recorder
ページ3に含まれる内容の要旨
VIEWSTATION POWER CONNECTION 10/100/1000 BASE-T ETHERNET INTERFACE: RJ-45 ALLOWS MULTIPLE VIEWSTATIONS STRAIGHT AND RECORDERS CABLES 1 4 MAXIMUM OF 16 Term 75 CAMERA INPUTS Loop HI-Z (VIDEO IN) LOOPING VIDEO RECORDER SOURCE (VIDEO OUT) FOR FUTURE POWER USE CONNECTION HASP KEY (INTO THE BOTTOM RIGHT USB PORT) CM9760-REL CM9760-ALM CM9760-DT RS-232 Figure 2. System Connections C635M-A-QS (3/09) 3
ページ4に含まれる内容の要旨
SETTING DATE/TIME PROPERTIES Follow these steps to set the Date/Time Properties on the recorder and the viewstation. Make sure you close all applications on the recorder and viewstation. Double-click the time on the system tray. The following page appears. Figure 3. Date and Time Page Set the date and time and then click Apply. Click Time Zone. The following page appears. Figure 4. Time Zone Page Select your time zone from the drop-down box. The default is (GMT -08:00) Pacif
ページ5に含まれる内容の要旨
SERVER CONFIGURATION UTILITY To open this application, double-click the DX9000 Server Configuration Utility icon on your recorder’s desktop. Set the frame rate and resolution. The number of channels is set automatically. Select the recording format. The default is NTSC. Click Server Identification to change the computer name (default is Pelco1) and IP address (default is 100.0.0.101). NOTE: Each recorder must have a unique recorder name and IP address. Enter the multicast group number.
ページ6に含まれる内容の要旨
CLIENT CONFIGURATION UTILITY You can find this application on the viewstation. With this application you can build a list of local servers and export them to the recorders. Make sure that the recorder and viewstation are connected to the network switch. Go to Start > Programs > DX9000 Viewstation > Client Configuration Utility. Log in. The default user name and password is admin/admin. The following page appears. Figure 6. Client Configuration Utility Page Select “Build a list
ページ7に含まれる内容の要旨
TIME SYNCHRONIZATION Go back to the Server Configuration Utility on the recorder to complete time synchronization. Click Suggest to see a list of the recorders that were exported in the Client Configuration Utility. Click Configure. NOTE: Repeat steps 1 and 2 on each physical recorder. Restart all recorders and viewstations. Figure 7. Define Time Synchronization The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002
ページ8に含まれる内容の要旨
www.pelco.com Pelco, Inc. Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 C635M-A-QS (1/09)
