ページ1に含まれる内容の要旨
SETUP MENUS ACCESSING THE SETUP MENUS
C2945M-E (6/09)
Use the 5-position button controller on the side panel of the camera to access and navigate the on-screen
The camera default settings are set at the factory to operate in most applications and lighting conditions,
C10DN Series Camera
display (OSD) menus. Use the following table to navigate through the menu options.
and normally require no adjustments. Sometimes, however, adjustments may be necessary.
Use the setup menus to customize the ca
ページ2に含まれる内容の要旨
SETUP MENUS ACCESSING THE SETUP MENUS C2945M-E (6/09) Use the 5-position button controller on the side panel of the camera to access and navigate the on-screen The camera default settings are set at the factory to operate in most applications and lighting conditions, C10DN Series Camera display (OSD) menus. Use the following table to navigate through the menu options. and normally require no adjustments. Sometimes, however, adjustments may be necessary. Use the setup menus to customize the ca
ページ3に含まれる内容の要旨
SETUP MENUS ACCESSING THE SETUP MENUS C2945M-E (6/09) Use the 5-position button controller on the side panel of the camera to access and navigate the on-screen The camera default settings are set at the factory to operate in most applications and lighting conditions, C10DN Series Camera display (OSD) menus. Use the following table to navigate through the menu options. and normally require no adjustments. Sometimes, however, adjustments may be necessary. Use the setup menus to customize the ca
ページ4に含まれる内容の要旨
6. Varifocal lens only: BACK FOCUS VARIFOCAL MOUNT LENS FOCUS LOCKING SCREW LOCKING SCREW a. Set the varifocal to wide (W) and the lens focal length to far (∞). After mounting the lens, you must focus The C10DN Series camera can be mounted from either the top or bottom, depending on the type of your C10DN Series camera. Adjust both camera mount used in your installation. Use a standard 1/4-20 screw. The maximum thread depth is b. Adjust the back focus: the back focus (on the camera) and the
ページ5に含まれる内容の要旨
6. Varifocal lens only: BACK FOCUS VARIFOCAL MOUNT LENS FOCUS LOCKING SCREW LOCKING SCREW a. Set the varifocal to wide (W) and the lens focal length to far (∞). After mounting the lens, you must focus The C10DN Series camera can be mounted from either the top or bottom, depending on the type of your C10DN Series camera. Adjust both camera mount used in your installation. Use a standard 1/4-20 screw. The maximum thread depth is b. Adjust the back focus: the back focus (on the camera) and the
ページ6に含まれる内容の要旨
6. Varifocal lens only: BACK FOCUS VARIFOCAL MOUNT LENS FOCUS LOCKING SCREW LOCKING SCREW a. Set the varifocal to wide (W) and the lens focal length to far (∞). After mounting the lens, you must focus The C10DN Series camera can be mounted from either the top or bottom, depending on the type of your C10DN Series camera. Adjust both camera mount used in your installation. Use a standard 1/4-20 screw. The maximum thread depth is b. Adjust the back focus: the back focus (on the camera) and the
