ページ1に含まれる内容の要旨
Operating Instructions
Network Camera
Model No. KX-HCM280A
Please read this manual before using and save this manual for future reference.
Panasonic Network Camera Website: http://www.panasonic.com/netcam
for customers in the USA or Puerto Rico
ページ2に含まれる内容の要旨
Operating Instructions Main Features *1 IPv6 Network Camera Your Panasonic Network Camera supports IPv6 (Internet Protocol Version 6), IPv6 was created to address the additional IP addresses that will be needed as the Internet continues to expand. Since the camera also supports IPv4 that's currently used, it is "dual stack" design will seamlessly operate while IPv6 is phased in. For more information in IPv6 you wish to visit http://www.ipv6.org/. See page 13 for more information. Better Ima
ページ3に含まれる内容の要旨
Operating Instructions Enhanced Multi-Camera Page Multi-Camera page displays up to 4 cameras. The previous model displays only 4 cameras, but this camera can switch 3 sets of 4 cameras. Additionally, the camera can displays maximum 12 cameras on a page in a static image. Supporting Viewnetcam.com service Viewnetcam.com service allows you to access the camera over the Internet with your favorite domain name (e.g. bob.viewnetcam.com) instead of a global IP address. Multi-Language Display Top p
ページ4に含まれる内容の要旨
Operating Instructions How to Use This Documentation The camera includes the following 2 manual types. Installation/Troubleshooting Installation/Troubleshooting provides explanations for accessories included with the camera, the initial configuration, and troubleshooting tips. The Installation/Troubleshooting helps you to easily configure the camera. Operating Instructions (This manual) Operating Instructions explains about operations, settings, features and the cleaning method when using
ページ5に含まれる内容の要旨
Operating Instructions System Requirements for your PC Your PC (Personal Computer) and network must meet the following technical specifications for the camera to work properly. For IPv4 Connection Item Description ® ® ® ® Operating Microsoft Windows XP, Microsoft Windows 2000 ® ® ® ® System Microsoft Windows Me, Microsoft Windows 98SE CPU For viewing single camera ® Pentium III (800 MHz or greater is recommended.) For viewing multiple cameras Pentium 4 (1.8 GHz or greater is recommended.) P
ページ6に含まれる内容の要旨
Operating Instructions For IPv6 Connection Item Description ® ® Operating Microsoft Windows XP Service Pack 1 or later System CPU For viewing single camera Pentium III (800 MHz or greater is recommended.) For viewing multiple cameras Pentium 4 (1.8 GHz or greater is recommended.) Protocol TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ICMPv6, NDP) Interface 10/100 Mbps network card installed Web Browser Internet Explorer 6.0 or later (Not included on the Setup CD- ROM) Note See Panasonic Network
ページ7に含まれる内容の要旨
Operating Instructions IMPORTANT SAFETY INSTRUCTIONS When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read and understand all instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. After taking away the sand or the dust on the lens, wipe the lens with lens cleaning paper. 6. Do not block any ventilation openings. Install in accordance with the manufacturer's instr
ページ8に含まれる内容の要旨
Operating Instructions User Name and Password Protection The use of a unique User Name and secret Password is an important tool that will help limit unauthorized individuals from accessing the camera. If you choose to disable this tool, and choose not to limit access by use of a User Name and Password, this may result in access to the camera by unauthorized individuals. (see page 71) 8
ページ9に含まれる内容の要旨
Operating Instructions Table of Contents 1 Camera Monitoring..................................................... 11 1.1 Accessing the Camera ................................................................ 11 1.1.1 To Access the Camera in IPv6................................................................. 13 1.2 Viewing Single Camera page ...................................................... 15 1.2.1 Auto Centering the Image (Click to Center)............................................. 19 1
ページ10に含まれる内容の要旨
Operating Instructions 2.16 Buffering or Transferring Images by Timer................................... 82 2.17 Buffering or Transferring Images by Alarm Signal ....................... 91 2.18 Transfer the Camera Image in Transport Mode ......................... 102 2.19 Transfer the Camera Image in Tunnel Mode.............................. 103 2.20 Specifying Operation Time ........................................................ 104 2.21 Controlling External Output Terminal...................
ページ11に含まれる内容の要旨
Operating Instructions 1 Camera Monitoring 1.1 Accessing the Camera 1. Start up the web browser on your PC. 2. Enter "http://IPv4 Address (or URL):Port Number" on the address bar, and press [Enter] on the keyboard. When port number is 80 (default), you do not need to enter port number. See page 42 for details about port number. For IPv6 connection, see page 13 and page 14, and prepare the requirements. Enter the "http://(IPv6-registered URL):Port Number" on the address bar. If the came
ページ12に含まれる内容の要旨
Operating Instructions 4. Click the following tabs to display each page. A B C D E F G Top Single Multi Buffered Image Setup Maintenance Support Login Network Camera Select a language to display KX-HCM280A Display IPv4, IPv6 Version ∗.∗∗ ∗.∗∗ Version Number or IPsec connection. Running in IPv4 mode. A To Single Camera page (page 15) B To Multi-Camera page (page 30) C To Buffered Image page (page 32) D To Setup page (page 37) E To Maintenance page (page 108) F To Support page (page 117) G To lo
ページ13に含まれる内容の要旨
Operating Instructions 1.1.1 To Access the Camera in IPv6 You need to prepare the followings to access the camera in IPv6. PC Requirements Operating System: Windows XP Service Pack 1 or later Web Browser: Internet Explorer 6.0 or later An IPv6 Router An IPv6 Connection Service To connect in IPv6, subscribe to the ISP's "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4 Tunneling" service. The camera does not work in IPv6-only network. IPv6 Domain Name Service In Windows XP, you cannot access the c
ページ14に含まれる内容の要旨
Operating Instructions Setting up the IPv6 Router, your PC, and the Camera Setting up the IPv6 Router Set up the router as you subscribe to the IPv6 service. If the access from WAN side is disabled on the router, enable the TCP packets from WAN side in the packet filtering. See the Panasonic Network Camera support website at http:// panasonic.co.jp/pcc/products/en/netwkcam/ for information about the recommended routers. Setting up your PC 1. Click [Start] [All Programs] [Accessories] [Command
ページ15に含まれる内容の要旨
Operating Instructions 1.2 Viewing Single Camera page 1. Access the camera (see page 11). The Top page is displayed. 2. Click the [Single] tab at the top of the page. When Security Warning window is displayed, click [Yes] (see page 16). See page 17 for Security Warning window when using Microsoft Windows XP Service Pack 2. Capture Image Click to Network Camera Button Center Pan / Tilt Scan (see page 19) (see page 20) Zoom Focus Preset Program Operation Bar Camera Image (see page 21) Alar
ページ16に含まれる内容の要旨
Operating Instructions Security Warning window ® To view a video (Motion JPEG), ActiveX Controls must be installed. When trying to display a video for the first time, Security Warning window will be displayed. When using Windows XP or Windows 2000, log in as an administrator to install it. If you cannot install ActiveX Controls or you cannot see the video in the Internet Explorer Click [Tools] [Internet Options] [Security] tab and click [Custom level] on the web browser. (1) Check "Prompt
ページ17に含まれる内容の要旨
Operating Instructions Security Warning window on Microsoft Windows XP Service Pack 2 To view a video (Motion JPEG), ActiveX Controls must be installed. Follow the steps shown below to install ActiveX Controls. 1. Click the warning displayed above the tabs, and click [Install ActiveX Control...]. Network Camera Pan / Tilt Scan Zoom Focus Preset Program Alarm Brightness Please click here when gray color screen displayed - + STD Running in IPv4 mode. Output Open Short Refresh Interval Motion Reso
ページ18に含まれる内容の要旨
Operating Instructions The Banner When the camera accesses the Internet, the banner displays product information about cameras or announcements about the latest firmware, etc. from Panasonic. Whether or not to display the banner can be set at Banner Display (see page 77). Note The banner is displayed when [Yes] is checked for Allow Access from the Internet on the Automatic Setup page, or when [Enable] is checked for Auto Port Forwarding on the UPnP page for the Connection Mode of Static or
ページ19に含まれる内容の要旨
Operating Instructions 1.2.1 Auto Centering the Image (Click to Center) Using your mouse, click any portion of the camera image. As long as it is within the pan/tilt range of the camera, the image will automatically move to place the selected point in the center of the screen. 1. Move the cursor to the desired point. Cursor 2. Click it. The clicked point is centered. See page 22 for the pan/tilt operation. Note When End Display appears on the operation bar, Click to Center does not work
ページ20に含まれる内容の要旨
Operating Instructions 1.2.2 Capturing a Still Image A still image can be saved on your PC. 1. Operate pan/tilt and select a resolution to display an image. 2. Click the capture image button. Capture Image Button The camera image opens in another window. 3. Right-click the image, and select [Save Picture As...]. Save as dialog box is displayed. 4. Specify a folder, and click [Save]. Camera image is saved in the folder. 5. Click [Close]. 20
