ページ1に含まれる内容の要旨
ULTRA DIGITAL WIRELESS
SURVEILLANCE SYSTEM
WITH INDOOR/OUTDOOR NIGHT VISION COLOR
CAMERA WITH AUDIO
Instruction Manual
English Version 3.0
MODELS:
LW2201 Series
www.lorexcctv.com
Copyright © 2009 Lorex Technology Inc.
ページ2に含まれる内容の要旨
Important Safeguards Thank you for purchasing the Ultra Digital Wireless Surveillance System. Lorex is committed to providing our customers with a high quality, reliable security product. Please visit us on the web for the most current Manuals, Quick Start Guides and Firmware. Additional Language Manuals are also available at: www.lorexcctv.com CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RICK OF ELECTRIC SHOCK
ページ3に含まれる内容の要旨
Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installation 8.
ページ4に含まれる内容の要旨
Important Safeguards Service Use 19. Cleaning - Unplug the video product from the 13. Servicing - Do not attempt to service this wall outlet before cleaning. Do not use liquid video equipment yourself as opening or cleaners or aerosol cleaners. Use a damp removing covers may expose you to cloth for cleaning. dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Product and Cart Combination - Video and cart combination shoul
ページ5に含まれる内容の要旨
General Precautions General Precautions 1. All warnings and instructions in this manual should be followed 2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth for cleaning 3. Do not use this unit in humid or wet places 4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked FCC CLASS B NOTICE Note: This equipment has been tested and found to
ページ6に含まれる内容の要旨
Features Features Ultra Digital Wireless Technology Provides Excellent Image Quality and Clarity Interference Free, secure and private signal Up to 450 ft Wireless Transmission Range* Weather Proof Metal Camera is Great for Indoor/Outdoor Surveillance Listen in with Exceptional Sound Clarity Safety Warning Feature Notifies You When out of Range * Maximum open space transmission range. The actual range is dependent upon building materials and other obstructions in path of wir
ページ7に含まれる内容の要旨
Table of Contents Table of Contents Getting Started ..............................................................................................................................................8 Wireless Receiver .........................................................................................................................................9 Rear Panel...................................................................................................................................
ページ8に含まれる内容の要旨
Getting Started Getting Started The System comes with the following components: 1 x WIRELESS CAMERA (with 1x MOUNTING STAND 1 x WIRELESS RECEIVER SUNSHADE)* 1 x MOUNTING SCREW KIT 1 x RCA/BNC ADAPTER 1 x PIECE OF 2 X WIRELESS ANTENNA 2 x POWER ADAPTER DOUBLE-SIDED (FOR CAMERAS & RECEIVER) (FOR RECEIVER & TAPE CAMERAS) *Camera configuration may vary by model CHECK YOUR PACKAGE TO CONF
ページ9に含まれる内容の要旨
Wireless Receiver Wireless Receiver 1. Wireless Antenna: Connects to the back of the receiver. 2. Channel LEDs: When lit in green, indicates the active viewing mode. 3. VGA/QVGA* button: Press to switch 1 between VGA and QVGA video resolutions; press and hold for several seconds to remove/replace channels from Auto-Scan. See page 14 for more details. 4. Front LED: Lit in green to indicate power to the receiver. 5. Pair: Press to switch between CH1~4, Quad split-screen mode, and Aut
ページ10に含まれる内容の要旨
Wireless Receiver Installing the Camera To install the camera: 1. Use the included mounting screws to mount the stand to the mounting surface: • Mark the position of the screw holes on the wall. • Drill holes and insert the drywall plugs as needed. • Firmly attach the stand to the wall using the provided screws. Figure 2.0 Attach stand to mounting surface 2. Slide the sunshade on the camera body. 3. Screw on the antenna to the back of the camera. 4. Attach the camera to t
ページ11に含まれる内容の要旨
Setting up the Wireless Receiver Setting up the Wireless Receiver To set up the wireless receiver: 1. Screw on the antenna to the back of the receiver. 2. Connect the Yellow video cable and White audio cable (mono) to your TV, DVR, or observation system. Use the RCA/BNC Adapter (included) to connect the video cable to a BNC port. 3. Connect the Black power cable from the receiver to the cable of the Power Adapter; plug the Power Adapter to an outlet or surge protector. 4. Place the rece
ページ12に含まれる内容の要旨
Viewing Modes Viewing Modes There are six different viewing modes available on the system: individual viewing of channels 1~4, Quad split-screen, and Auto-Scan. For details on Auto-Scan, see page 14. Press the Pair button repeatedly to switch between these viewing modes. AUTO Auto-Scan mode Quad mode Channel 1 PAIR Press the Pair button to change viewing modes* Channel 4 Channel 2 Channel 3 F
ページ13に含まれる内容の要旨
On-Screen Display On-Screen Display 1 2 1. Signal Indicator – The signal indicator shows the strength of the signal being received from the camera. The number of bars in the Signal Indicator shows the strength of the signal – One or No Bars indicates the signal is poor, and 4 bars indicate a very strong signal. Note: Signal Indicator not shown while in Quad Mode. ATTENTION: If signal is low (e.g. 1 or 2 bars) adjust the antennas, or reposition the cameras or receiver for
ページ14に含まれる内容の要旨
Adding Cameras Adding Cameras The System comes with a camera that has already been paired. The Pairing Function assigns each camera to a different channel on the Wireless Receiver (up to 4 Cameras), and is necessary for configuring additional cameras. By default, the camera included with the system appears on channels 1 on the wireless receiver. Note: It is highly recommended to pair the cameras to the receiver before permanently mounting the cameras. 1. Connect the power cable from th
ページ15に含まれる内容の要旨
Setting Dwell Time Setting Dwell Time You can set the length of time (in seconds) that the receiver displays channels while in Auto Scan. To set dwell time: 1. Make sure the Wireless Receiver and cameras are fully connected and powered on. 2. Press and hold the VGA/QVGA button and Pair button at the same until the Dwell Time screen appears. Continue Figure 7.0 Press and hold the VGA/QVGA holding both buttons. and Pair buttons at the same time 3. With the Pair button and VGA/QVGA bu
ページ16に含まれる内容の要旨
Troubleshooting Troubleshooting If you have problems with your System, there is often a quick and simple solution. Please try the following: Problem Solution • Check all connections to the Camera. Make sure the adapter is plugged in. There is no picture from a • Make sure that the Cameras and Receiver are Camera. both ON. • Make sure that the camera is in range of the Receiver. • Make sure that each camera is within range, and There is Interference with that there are no large
ページ17に含まれる内容の要旨
Appendix A: System Specifications Appendix A: System Specifications Receiver Specifications Receiver Receiving Frequency Range 2.400GHz~2.480GHz RX Sensitivity -81dBm Demodulation GFSK Data Rate 160 Kb/s Supported Resolutions VGA (640x480) or QVGA (320x240) Power Requirement 12Vdc +/-10% Power Consumption 200mA Max 14°F ~ 122°F Operating Temp Range -10° ~ 50° C Camera Specifications Camera Transmit Frequency Range 2.400GHz~2.480GHz TX Power 16dBm Data Rate 160 Kb/s Mod
ページ18に含まれる内容の要旨
Appendix B: About Digital Wireless Technology Appendix B: About Digital Wireless Technology The Digital Wireless signal transmission type used by the Lorex LW2201 series is also known as FHSS – Frequency Hopping Spread Spectrum. This type of signal is highly resistant to deliberate jamming as it generates a channel hopping sequence using an algorithm generated by the receiver system. The 2.4GHz (2.400-2.480Ghz) band is being divided into sections or paths of 2MHz per section, and each sec
ページ19に含まれる内容の要旨
ページ20に含まれる内容の要旨
It’s all on the Web! Tout est sur le Web! ¡Todo aparece sobre el Internet! Product Information Specification Sheets Información acerca del producto Fichas de especificaciones Information sur le produit Fiches signalétiques User Manuals Software Upgrades Guides de l’utilisateur Actualizaciones del programa Guías del usuario Mises à jour du logiciel Quick Start Guides Guías de arranque rápido Firmware Upgrades Guides de début rapide Actualizaciones del microprograma Mises à jour du
