ページ1に含まれる内容の要旨
Integrated LCD DVR Surveillance
System
With Built-In 4 Channel Triplex Digital Video
Recorder and 4 Weatherproof Night Vision Cameras
Instruction Manual
English, Spanish, and French Version 2.0
Versión inglesa, española, y francesa 2.0
Version anglaise, espagnole, et française 2.0
MODEL:
L15LD420 Series
L17LD420 Series
www.lorexcctv.com
Copyright © 2008 LOREX Technology Inc.
Copyright © 2007 LOREX Technology Inc.
ページ2に含まれる内容の要旨
Thank you for purchasing the L15LD420 / L17LD420 Series Observation System. Lorex is committed to providing our customers with a high quality, reliable security product. The L15LD420 / L17LD420 Series observation system is one of the most sophisticated video security systems on the market today with many of the same advanced features you will find in “high security” systems used in banks and casinos. Perfect for any upscale home or office, the L15LD420 / L17LD420 is a complete packaged sy
ページ3に含まれる内容の要旨
Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installation 1. Read
ページ4に含まれる内容の要旨
Important Safeguards Service Use 13. Servicing - Do not attempt to service this video 19. Cleaning - Unplug the video product from the wall equipment yourself as opening or removing covers outlet before cleaning. Do not use liquid cleaners or may expose you to dangerous voltage or other aerosol cleaners. Use a damp cloth for cleaning. hazards. Refer all servicing to qualified service personnel. 20. Product and Cart Combination - Video and cart combination should be moved with care. Quick 1
ページ5に含まれる内容の要旨
General Precautions NOTE This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it is designated to provide reasonable protection against interference and will not cause interference with other appliance usage. However, it is imperative that the user follows this manuals guidelines to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard injury In order to improve the feature functions and qualit
ページ6に含まれる内容の要旨
Feature List Feature List Monitor � 15" High Resolution LCD Monitor with built in DVR � Mouse control interface (mouse included) � Trilingual interface (English, Spanish and French) � Supports DDNS (Dynamic Domain Name Server) � Commercial grade monitor stand � Wall or Rack mountable (mounts sold separately) � A full range of LOREX Pro Series CCTV cameras available for use with this system Built-In Digital Video Recorder (DVR) � Triplex Technology allows for recording, playback or viewing sim
ページ7に含まれる内容の要旨
Table of Contents Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ8に含まれる内容の要旨
Time/Date Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Event Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Playback Speed Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 System Setup and Navigation . . . . . . . . . . . . . . . . . . . . . . . .
ページ9に含まれる内容の要旨
Getting Started Getting Started The L15LD420 / L17LD420 Series comes with the following components: LCD & DVR SYSTEM 4 x CAMERAS WITH PRE-INSTALLED HDD * 4 x METAL STANDS * 1 x POWER ADAPToR 4 x 60 FT. (18M) 4 in 1 Power Adaptor for Camer- EXTENSION CABLES as (Optional in certain models) * 1 x 10’ ETHERNET 1 x REMOTE CONTROL 1 x HARDWARE MANUAL CABLE 2 x AA BATTERIES 1 x SOFTWARE MANUAL 1 x QUICK START GUIDE 1 x SOFTWARE CD * SCREEN SIZE, COLOR, HDD SIZE, CAMERA CONFIGURATION AND CAMERA POWER
ページ10に含まれる内容の要旨
Front Panel Front Panel 4 1 2 3 5 6 7 8 9 10 1. Display Control Buttons 2. PTZ 3. Menu Button 4. +/- Buttons 5.LCD Monitor Power Button 6. IR LED Indicators 7. 0~9 Buttons 8. Search & Record Buttons 9. Playback Controls 10. Navigation & Enter 1. DISPLAY CONTROL BUTTONS - Control the onscreen display of Cameras: � MODE - Displays the Split Mode Menu. � ZOOM - Zooms in on the currently displayed camera (1x Zoom). Use the direction buttons or mouse and move to the area to be enlarged. � SEQ/AUDI
ページ11に含まれる内容の要旨
Front Panel Front Panel 6. IR RECEIVER & LED INDICATORS: � IR RECEIVER - Receiver for the Remote Controller signal. � DVR STATUS LEDs: POWER - Power LED indicator for the System power status (ON/OFF). HDD - HDD access LED indicated when activity is taking place on the system Hard drive. 7. 0~9 BUTTONS - Switches the full screen view between channels 1~4. Numbers 0~9 are used to enter the System Password. 8. SEARCH & REC BUTTONS: � SEARCH - Enters search mode (search through previously
ページ12に含まれる内容の要旨
Side Panel Side Panel 1 2 3 4 1. Removable Drive Bay 2. Drive Bay Lock 3. USB Backup Port 4. Volume Adjustment 1. REMOVABLE DRIVE BAY - Use to change the SATA Drive to the system 2. DRIVE BAY LOCK - Locking mechanism for the removable drive. 3. USB BACKUP PORT - Connect a USB memory stick or USB HDD for data backup 4. VOLUME ADJUSTMENT KNOB - Use the Volume Adjustment Knob to increase or decrease the Volume Output to the AUDIO OUTPUT Port. 12
ページ13に含まれる内容の要旨
Back Panel Back Panel 1 3 4 5 2 6 7 8 1. Alarm Block Chart 2. Audio Ports 3. Alarm Block & RS-485 4. Ethernet Port 5. CH 1~4 6. Monitor / Spot Out Ports 7. PS2 Mouse Port 8. Power Input Port 1. ALARM BLOCK CHART - Outlines the Alarm Block connections 2. AUDIO PORTS - One Audio INPUT port, and one Audio OUTPUT port. 3. ALARM BLOCK & RS-485 CONNECTIONS - Controls Alarm devices, and for direct connection to PTZ cameras. 4 sensor inputs and 1 relay output. 4. ETHERNET - Connects the System to a ne
ページ14に含まれる内容の要旨
Remote Control Remote Control Listed below is the new Remote Control. All Buttons described above function the same as the Front Panel buttons. 1. MODE - Changes the view to 4-Channel Split Screen. 2. ZOOM - Zooms in on the image (must 1 14 be in full screen mode). 2 3. FREEZE - Freeze the image on the 3 current full screen channel. 15 4 4. SEQUENCE - Start Sequence mode. 16 5 5. MENU - Press to access the System 17 Menu. 6 18 7 6. RECORD - Starts manual recording on the DVR. 8 7. + BUT
ページ15に含まれる内容の要旨
Camera Installation Camera Installation Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cable that connects the camera to the System. Installation Warnings: � Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. � Plan the cables’ route so that it is not close to power or telephone lines
ページ16に含まれる内容の要旨
Camera Installation Connecting Cameras 1. Connect the Female BNC end of the supplied 60’ extension’ cable to the camera. Connect the male Power end of the extension cable to the camera. * Camera may not be exactly as shown. IMPORTANT NOTE: The ends of the extension cable are NOT the same - one end has a Male power port, and the other has a Female power port. Before permanently running the Camera Extension Cable, make sure that the cable has been oriented between the Camera and the unit corr
ページ17に含まれる内容の要旨
Camera Installation 2. Connect the Female end of the supplied 60’ extension cable to an open BNC camera input on the back of the System. Connect the female Power end of the extension cable to the 4-cable power adaptor. NOTE: To access the Connection Ports for the System, the monitor can be tilted forward (for easier access). * Camera may not be exactly as shown. 17
ページ18に含まれる内容の要旨
Connecting the Mouse Connecting the Mouse Connect the supplied mouse to the PS/2 Port on the back of the unit. Alternatively, a mouse can be connected to the USB port located on the side of the unit. USB Connection - A mouse can be connected to the PS/2 Port on the back panel. Mouse Controls LEFT MOUSE - RIGHT MOUSE - � Click to activate a function. � Used to decrease values in MENU � Used to increase Mode. values in MENU Mode. � Opens / Closes the SETUP MENU. SCROLL WHEEL - � Increa
ページ19に含まれる内容の要旨
Display Modes Display Modes Initial Loading Sequence � Connect the POWER cable located on the back of the Observation System. The unit will automatically power on. � The System will load the firmware � The System will perform a Hard Drive check. � The unit will initially load to a split screen view, displaying all 4 cameras (if available). NOTE: If a new HARD DRIVE is detected, the system will prompt you to FORMAT the drive. If you do not choose to format the HARD DRIVE, the drive will not
ページ20に含まれる内容の要旨
Display Modes Network Status Indicators The Network Indicators appear when a remote connection is made to the unit: � Indicates that there is no client connection. � Indicates that a client is connected to the system. � Indicates that a network search is being performed. Function Icons The function icons appear on the main screen, and can be selected using the Mouse. 20
