ページ1に含まれる内容の要旨
FIXD IP DOME CAMERA
FIXD MEGAPIXEL IP DOME CAMERA
INSTRUCTIONS
VN-V225U
(Installation)
VN-X235U
● This is a supplementary instruction manual to
[READ ME FIRST]. Please read through this
manual together with the bundled [READ ME
FIRST] (sheet).
● For image and network settings, please refer to
[INSTRUCTIONS (Setting)].
LST0926-001A
ページ2に含まれる内容の要旨
Getting Started Features High frame rate Data transmission is possible in VGA size (640 x 480) at a rate of 30 fps. (VN-V225U) Data transmission is possible in Quad-VGA size (1280 x 960) at a rate of 15 fps. (VN-X235U) High picture quality The camera employs a progressive CCD with a Support for dual stream resolution of about 330,000 pixels (1/4"), which JPEG and MPEG images can be distributed enables video surveillance using high-quality simultaneously. images. (VN-V225U) The camera emplo
ページ3に含まれる内容の要旨
Analog signal output (for installation) Contents This camera is equipped with an analog video monitor signal output terminal, which is used for adjusting the camera angle during installation. Getting Started Saving JPEG images to the FTP server Features ........................................................ 2 at regular intervals JPEG images may be uploaded to the FTP Contents ........................................................ 3 server at regular intervals. Precautions ...............
ページ4に含まれる内容の要旨
Getting Started Precautions Copyright Protection With the exception of the user being the copyright holder or when permission such as for duplication has been granted by the copyright holder, permission is required in Storage and Operating Environment principle for the duplication, modification, or This product is an indoor camera. It cannot transmission of copyrighted video and audio be used outdoors. data. Do not store in the following environments. Unauthorized duplication, mod
ページ5に含まれる内容の要旨
Some hubs/switches of products that are Others equipped with intelligent features may include a broadcast/multicast suppression function. This camera comes with a built-in AGC Viewing of multicast images on this product circuit. Setting AGC to AMidB, AHighB or may fail if this function is enabled. ASuperB increases the sensitivity of a dark image, and the screen may appear grainy. During viewing using the integrated viewer, This is not a malfunction. the video and audio sound may a
ページ6に含まれる内容の要旨
Getting Started Name and Function of Parts Camera G A B A B C F D E A Mounting holes (oval) 4 G Alarm cable/Audio cable/Power cable Use these holes when mounting the camera (A [READ ME FIRST]) directly to the ceiling or a wall. Type Color Signal name B Mounting holes (round) 4 Alarm cable Black Red Alarm input 1 Use these holes when mounting the camera (Shielded Brown Alarm input 2 directly to the ceiling or a wall. cable) They are also used for mounting the camera to Orange Alarm an ele
ページ7に含まれる内容の要旨
Camera Body/Interior T The following is an illustration when the dome cover, inner dome, and outer casing are removed. Removal procedures (A page 11 ARemove the outer casingB) Lens Rear face of camera unit (A page 8) K O MAC address P H I N H M J L K H [10BASE-T/100BASE-TX(PoE)] LAN cable O [MAC address] indication connector (RJ-45) The MAC address is a unique physical address of the product. This address cannot be altered. I Fall prevention sheet P Fall prevention wire mounting screw This she
ページ8に含まれる内容の要旨
Getting Started Name and Function of Parts (continued) Lens Y Q X W U R S V T U T Q Tilt fastening screw U [RESET] button This button has two functions as described Note: below, depending how it is being pressed. ● After adjusting the field angle, tighten the tilt ● Reset function (press for less than 2 seconds fastening screw to secure the camera so that and release) its field angle does not go out of alignment. (A [READ ME FIRST])
ページ9に含まれる内容の要旨
V Status indicator Indicates the current status of the camera. Starting up : Lights up in orange After startup is complete : Lights up in green Error : Blinks in orange Memo: ● When the camera is in the focus adjust mode, the status indicator blinks in green and orange alternately. ● The indicator light after startup can be set to off or blink in green using the [LED State] of the integrated viewer. To alter the settings of the LED indicato
ページ10に含まれる内容の要旨
Connection/Installation Mounting the Camera Embedding the Camera into the Ceiling T The camera can be mounted to ceilings with a thickness between 9.5 mm and 22 mm. Selecting a Mounting Method Preparation The procedures vary according to the mounting method. Mount the camera accordingly by 1 Make a hole in the ceiling (R120 mm) referring to the respective section. 2 Pull out the cables from the hole in Note: the ceiling ● Be sure to
ページ11に含まれる内容の要旨
4 Remove the inner dome Connection The inner dome is fastened using 2 catches. Memo: Remove the inner dome by unfastening it from ● For details, please also refer to the [READ the catches. ME FIRST] (sheet) provided. 5 Remove the outer casing Note: ● For your safety, turn on the power only after (This mounting method does not make use of an all connections are completed. outer casin
ページ12に含まれる内容の要旨
Connection/Installation Mounting the Camera Mounting with the cables pulled out from the side (continued) When mounting the camera to the ceiling or wall, you can pull out the cables from the side without Mounting having to make a hole in the ceiling. 1 Align the shooting direction with the Memo: shooting direction mark (j), followed ● The basic mounting procedures are identical to by mounting the camera those described for “Direct mounti
ページ13に含まれる内容の要旨
Connecting the Alarm Alarm output Connect to alarm devices such as alarm, Input/Output Cable indicator, light or buzzer. Output Requirements Alarm Input ● NPN open collector output equivalent (Refer Connect the cable to sensors such as infrared sensors, door sensors, metal sensors and to the INSTRUCTIONS (Setting) on procedures to set the output logic. ) manual switches. ● Allowable applied voltage: DC 12 V and Input Requirements below ● Allowable inflow current: 50 mA ● Non-voltage rel
ページ14に含まれる内容の要旨
Others Troubleshooting Symptom Causes and Countermeasures Images are not output to the ● Set the [MONITOR OUT] selection switch to ANB or APB, and monitor press the Reset button. ● When using the [MONITOR] output, set the privacy mask to AOffB. (A [INSTRUCTIONS (Setting)]) Band noise is found at the lower ● When using the [MONITOR] output, set the privacy mask to part of the monitor image AOffB. Images via the network are ● Set the [MONITOR OUT] selection switch to AOFFB, and disrupted press
ページ15に含まれる内容の要旨
Network output Specifications Image compression format : JPEG, MPEG4 Frame size : 1280960 (VN-X235U only) CAMERA HEAD 640480 320240 Image pickup device Horizontal resolution VN-V225U : 1/4" square pixel progressive-scan CCD VN-V225U : 400 TV lines (typ.) (complementary filter) VN-X235U : 700 TV lines (typ.) VN-X235U : 1/3" square pixel Network interface progressive-scan CCD :RJ-45 (complementary filter) 100BASE-TX/10BASE-T/ Effective pixels FULL/HALF/Auto negotiation VN-V225U : Approx.
ページ16に含まれる内容の要旨
Others Specifications (continued) Accessories Safety Precautions 1 Read Me First 1 Overall CD-ROM 1 Alarm input 2 : No-voltage a contact input, NPN open collector input, Warranty Card (For USA) 1 low-level input, latch/ Service Information Card (For USA) 1 momentary (500 ms and above) input (circuit current Template 1 during low-level input: 1 mA; applied voltage during high- level input: DC 3.3 V) Alarm output 2 : NPN open collector output (allowable applied voltage: 12 V; allowable in
ページ17に含まれる内容の要旨
Dimension [Unit: mm (inches)] T Specifications and appearance of this unit are subject to change for further improvements without prior notice. 17
ページ18に含まれる内容の要旨
VN-V225U/VN-X235U FIXD IP DOME CAMERA / FIXD MEGAPIXEL IP DOME CAMERA LST0926-001A © 2009 Victor Company of Japan, Limited
