ページ1に含まれる内容の要旨
OPERATION MANUAL
Built-in x35 ZOOM / WDR
High Resolution AUTO FOCUS CAMERA
HZC-855NX/PX Series
READ AND KEEP THIS OPERATION MANUAL
ページ2に含まれる内容の要旨
CAUTION: TO REDUCE THE RISK OF ELECTRIC CAUTION SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE RISK OF ELECTRIC SHOCK PARTS INSIDE. PREFER SERVICING TO QUALIFIED DO NOT OPEN SERVICE PERSONNEL. Indicate a potentially hazardous situation which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. Warning: This equipment generates and uses radio frequency energy and if not installed and used properly, I.e., in strict accordance
ページ3に含まれる内容の要旨
CAUTION FOR SAFE OPERATION 1. Water and Moisture 8. When operation is incorrect or a malfunction is observed To prevent fire or shock hazard, do not expose this camera While operating, if any abnormal condition (strange sound, to rain or moisture. smell or smoke) or a malfunction (no pictures, etc.) is observed, stop using the camera immediately, turn the power off, then contact your supplier. 2. Servicing Do not attempt to disassemble or repair by yourself. 9. Cleaning You may be e
ページ4に含まれる内容の要旨
CONTENTS 1. Features ---------------------------------------------------------------5 2. Terms & Functions ------------------------------------------------6 3. Installation ------------------------------------------------------------7 4. Camera Control Methods -------------------------------------------8 5. On Screen Display -------------------------------------------------- 10 6. Specifications --------------------------------------------------------- 21 7. Dimensions ------------------
ページ5に含まれる内容の要旨
1. Features Ideal Digital Video Camera for Security Privacy Zone Masking The HZC-855NX/PX Ser. is a compact camera that offers easy system HZC-855NX/PX Ser. mask the unwanted view for privacy protection integration. Coming with the built-in zoom lens, the user can monitor the up to 8 zones. Privacy Zone operate with zoom in/out and it increases scene from variable angle without the extra lens. the effect of privacy protection. With the DSP technology, such intelligent controls as auto iris, a
ページ6に含まれる内容の要旨
2. Terms & Functions FAR(-) BUTTON VIDEO OUTPUT This is the output terminal TELE(UP) BUTTON for composite video signal . NEAR(+) BUTTON VIDEO S-VIDEO OUTPUT SVIDEO This is the output terminal for separate Y/C signal . MENU BUTTON WIDE(DOWN) BUTTON POWER INPUT TERMINAL DC 12V POWER ON LAMP ( Please use a specified adaptor) In power ON state , this LED is ON . CAMERA CONTROL CONNECTOR This is the 14 pin connector for external camera controls . ( Refer to 4. CAMERA CONTROL METHODS ) -6-
ページ7に含まれる内容の要旨
3. Installation 3.1 Check all accessories with enclosed package . - HZC-855NX/PX Ser. SET - 14 PIN CONNECTION CABLE (150mm) - OPERATION MANUAL OPERATION MANUAL HZC-855NX/PX Ser. 14 PIN CABLE* * CABLE DESCRIPTION 1. KEY1 ( RED ) 2. KEY2 ( YELLOW ) 3. ZOOM ( GREEN ) 4. FOCUS ( BLUE ) 5. MENU ( WHITE ) 6. COM ( ORANGE ) 7. GND ( BLACK ) 8. GND ( BLACK ) 9. R+/NC ( BROWN ) 10. R-/RD ( PINK ) 11. T+/TD ( VIOLET ) 12. T-/GND ( GRAY ) 13. EXT
ページ8に含まれる内容の要旨
4. Camera Control Methods 4.1 Remote Control using for Hard wired connection ( Connector pin 3,4,5,6 ) Controller 14P Cable TELE (-) ZOOM 3 Relay WIDE(+) 14P Cable NEAR(+) 4 FOCUS Relay FAR (-) 5 MENU MENU ON Relay 6 COM 4.2 Remote Control using for RS-232C connection ( Connector pin 10,11,12 ) Connect to Serial PORT ( COM1 or COM2 ) Serial Cable 14P Cable Serial Cable 14P Cable ( 9 Pin D-Sub ) 2 10 RD(TxD) RD 3 TD 11 TD(RxD) SG 5 12 GND -8-
ページ9に含まれる内容の要旨
4.3. Remote Control using for RS-422/485 connection ( Connector pin 9,10,11,12 ) -------- OPTION Connect to Serial PORT 485 Converter (COM1 or COM2) Serial Cable 14P Cable Serial Cable 14P Cable ( 9 Pin D-Sub ) 2 10 RD(TxD) RD 3 TD 11 TD(RxD) SG 5 12 GND 422 RS-485 Converter 14P Cable 9 R + T+ T- 10 R- R+ 11 T+ R- 12 T- 485 14P Cable RS-485 Converter TRxD+ 9 R + TRxD- 10 R- 11 T+ 12 T- -9-
ページ10に含まれる内容の要旨
DESCRIPTION FUNCTION OSD Format Non display Auto Mode 5. On Screen Display Focus Mode ① MF Manual / Oneshot Mode Non display Backlight OFF ⑧ ⑧ Back Light ② BL Backlight ON ③,④ ① ② ⑤ ⑥ Non display Flickerless OFF Flickerless ③ FL Flickerless ON Non display NTSC:1/60 1 / 125 Shutter Speed . 9 variable steps ④ . 1 / 5 0, 0 0 0 Non display Nightshot OFF ⑤ Night Mode ⑦ ⑧ IR Nightshot ON Non display Auto Tracking WB mode Indoor Preset (3200°K) IN 5.1 How to d
ページ11に含まれる内容の要旨
5.2 OSD SETUP MENU Structure ZOOM SPEED 1 ~ 10 SETUP START ZOOM x1 ~ x34 LENS MODE MENU END ZOOM X35 ~ x90 E-ZOOM ON/OFF AF MODE ONESHOT/MANUAL.. O. RESET ON/OFF O. AF TIME 1 ~ 10 AF SENS. HIGH/ LOW/AF SENS MODE AUTO/SHT FIX/IRIS... MIN. DIST. 1cm ~ INF. LOW SHUTTER 2FLDS ~ 510 FIELDS HIGH SHUTTER 1/60 ~ 1/50000 AE MODE IRIS CLOSE ~ F1.6 GAIN 8 dB ~ 38 dB BRIGHTNESS 0 ~ 99 MAX GAIN 8 dB ~ 38 dB MAX FIELDS OFF ~ 510 FIELDS MODE ATW/AWC/MWB/… WB MODE CONTROL AUTO/LOCK/… RED GAIN 0 ~ 255 MODE OF
ページ12に含まれる内容の要旨
5.2 Display SETUP MENU 5.4 Quit SETUP MENU a. Press MENU key above 2 seconds so that SETUP MENU 1 is a. Press the MENU key again. SETUP MENU is disappeared, displayed on the screen. “SAVE?” or “QUIT?” is displayed at center of screen. b. Select item of SETUP MENU using TELE(up) / WIDE(down) key. If there is no change of adjustment state of Camera, c. NEAR(+) / FAR(-) key is used to increase / decrease data of “QUIT?” is showed, else “ SAVE?” is showed. selected item. ① “QUIT?” : quit SETUP
ページ13に含まれる内容の要旨
④ E-Zoom Control ⑥ ONESHOT AF RESET : ON means up to x230, OFF means only optical zoom region. : Use in case of focus deviation due to impact, vibration etc. E-ZOOM OFF → ON → . . . . Auto Focusing is operated during set time. O.RESET OFF → ON →…. ⑤ Set Focus Mode : It is composed of three modes. ☞ caution 1. It happens focus deviation according to circumstance condition AUTO ( brightness, facility to focus the object, etc ). :Use to focus automatically all
ページ14に含まれる内容の要旨
② LOW SHUTTER Speed : In Shutter Fix,Manual Mode, range is from 1/30 sec (2 fields) << SETUP MENU >> to 2 sec (128 fields). LENS MODE LOW SHUTTER OFF → 2 FLDS ~ 128FLDS AE MODE WB MODE (FLDS means how many times integrated of CCD signal.) NIGHTSHOT MODE BLC/WDR MODE ③ HIGH SHUTTER Speed PZM SETTING : In Shutter Fix,Manual Mode, range is from 1/60 sec to CAMERA ID SETTING SPECIAL FUNCTION 1/10,000 sec. FACTORY DEFAULT HIGH SHUTTER 1/60 → 1/100 → . . . . → 1/10000 ④ IRIS : In Iris Fi
ページ15に含まれる内容の要旨
⑧ MAX FIELDS (option) 5.7 White Balance Mode : Use for compensating the low illumination condition. In case that use this function because of low illumination condition, adjust maximum ① White Balance Mode integration fields to get brighter and dynamical image. But the scene : Outer illumination condition is expressed by Color temperature, becomes slower than OFF mode. The larger max fields is, Kelvin (°K). It is White Balance that shows white as white in any simultaneously the noise of image i
ページ16に含まれる内容の要旨
③ RED GAIN (Range is different on each Mode.) ④ Turnover LEVEL from DAY TO NIGHT : Adjust RED Gain, and tune the sensitivity of white point. : Set the LEVEL to turnover from Day to Night. MANUAL 0 → 1 →…. → 254 → 255 D→N LEVEL 0.1 lx → 1 lx → 10 lx →…. ④ BLUE GAIN (Range is different on each Mode.) ⑤ Turnover LEVEL from NIGHT TO DAY : Adjust BLUE Gain, and tune the sensitivity of white point. : Set the LEVEL to turnover from Night to Day. MANUAL 0 → 1 →…
ページ17に含まれる内容の要旨
5.9 BLC/ WDR Mode << SETUP MENU >> LENS MODE ① Backlight Compensation Mode AE MODE : It is for preventing the center object too darken when the excessive WB MODE light is behind the center object. Set BACKLIGHT ON, then brighten NIGHTSHOT MODE BLC/WDR MODE the center object in the contrast to the background light. Press PZM SETTING NEAR/ FAR key in 2 sec, Backlight mode become AUTO. CAMERA ID SETTING SPECIAL FUNCTION MODE OFF → BLC → H.BLC → WDR → …. FACTORY DEFAULT H.BLC [H
ページ18に含まれる内容の要旨
Quick setting method for Privacy Zone Masking 5.11 Camera ID SET 1. Zoom in wide as possible as you can. ① ID SET 2. Select Zone Number in “ZONE NUM.”. : Camera ID is indicating number assigned each Camera in case of 3. Select “On” by push the right button. controlling many Cameras. It is from 0 to 255. But in case of 0, 4. Push Menu button on the “CONTROL” to be able to move to that is not displayed on screen. It is always displayed even though wanted position spot and push again to go back
ページ19に含まれる内容の要旨
④ Title << SETUP MENU >> : It is the name of Camera. It enters 10 characters including blank.. LENS MODE AE MODE TITLE: ■■■■■■■■■■ WB MODE NIGHTSHOT MODE BLC/WDR MODE PZM SETTING CAMERA ID SETTING ▣ How to Enter the Title ▣ SPECIAL FUNCTION FACTORY DEFAULT Let’s enter the Title as “R1” , example -. Select the position of title character by using Near or Far key. The chosen position is blinking. (Only chosen Cursor will be blink as “■”, rest of them will be shown as a blank “”.) 5.12 SPECIAL FU
ページ20に含まれる内容の要旨
⑤ Freeze Mode : It pause current image. ON is to stop, OFF is to return to normal state. FREEZE ON → OFF →…. ☞ caution 1. Freeze image does not save when you reset the system. This system doesn’t have its’ own memory. ⑥ BAUD RATE : Use to communicate through RS232C, RS485, RS232TTL . BAUDRATE 4800bps → 9600bps → …. → 312kbps ☞ caution 1. If the Baud Rate does not match between Camera and external system, it may occur the communication failure. Please make
