ページ1に含まれる内容の要旨
PERFORMANCE MULTI-ROOM VIDEO
Warranty
7300 Series Camera
Multiplex Technology, Inc. warrants this product to be
free from defects in materials and workmanship for a
period of one year from the date of purchase or MTI will
repair, or at its option, replace the defective
product. To obtain warranty service, call MTI for a return
material authorization (RMA) number and return the
product prepaid to Multiplex Technology, Inc.,
3001 Enterprise Street, Brea, CA 92821, Attention:
Customer Service. Pl
ページ2に含まれる内容の要旨
Painting the Cover Plate ChannelPlus 7300 Series Solid State Cameras The solid brass cover plate may be painted to match the house color. The 7300 series are versatile solid state cameras, designed First, remove the camera from the plate. Lightly sand the plate using to fit standard single gang J boxes. The power supply terminals 300-400 grit wet/dry paper. Use a good quality metal primer that is rated for and BNC video connector are mounted on a PC board for exterior use. Before applying
ページ3に含まれる内容の要旨
Assembling the Camera Cover plate Locating the Camera vinyl gasket The camera ‘looks’ straight out from the cover plate. For a front door camera mount application, place the camera lens 66 inches off the ground, adjacent to 6-32 nuts the door. 1 Adding the DoorTel Front Door Intercom. Start nuts on studs only. Do not tighten nuts. R VIDEO DISTRIBUTION SYSTEM Slide camera thru hole, as shown. 2 DUAL VIDEO MODULATOR / BROADBAND AMPLIFIER / IR REPEATING SYSTEM Dimple on mount should fall Fr
ページ4に含まれる内容の要旨
Connecting the Camera Assembling the Camera (cont.) 4 Power cable AWG 26 or larger B) TIGHTEN BOTH NUTS TO SECURE ASSEMBLY. A) ALIGN CAMERA LENS TO HOLE IN OUTSIDE COVER. Monitor BLOW-UP CONNECT CAMERA WIRING TO TERMINAL BLOCK AS SHOWN. RG-59 or RG-6 coax A long cable run (150ft or more) can noticeably 5 reduce the picture brightness and increases the possibility of ground loop hum. Video Video Ground +Vdc Ground Viewing the Camera From All TVs in a House On a typical Camera: Video is Yellow
