ページ1に含まれる内容の要旨
Cisco Video Surveillance 2611 IP Dome
User Guide
Model CIVS-IPC-2611
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-24128-02
ページ2に含まれる内容の要旨
NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARR
ページ3に含まれる内容の要旨
CONTENTS Preface v CHAPTER 1 Overview 1-1 Features 1-1 IP Camera Overview 1-2 Physical Details 1-3 Package Contents 1-6 CHAPTER 2 Getting Started 2-1 Before Your Begin 2-1 Installing the Cisco Video Surveillance 2611 IP Dome 2-2 Preparing for Installation 2-3 Recessed Mounting in a Ceiling Tile 2-4 Performing the Initial Setup of the IP Camera 2-7 Accessing the IP Camera Windows 2-8 Adjusting the Video Image 2-10 Powering the IP Camera On
ページ4に含まれる内容の要旨
Contents Video Window 3-16 Audio Window 3-23 Privacy Region Window 3-24 Focus/Zoom Window 3-24 Security Windows 3-25 Initialization Window 3-25 Complexity Window 3-26 Applications Windows 3-27 Mail/FTP/HTTP Window 3-27 Motion Detection Window 3-30 Event Window 3-31 SNMP Window 3-34 Alarm I/O Ports Window 3-35 Status Windows 3-36 System Window 3-36 Audio/Video Window 3-37 Network Window 3-38 Syslog & Log Window 3-38 Video L
ページ5に含まれる内容の要旨
Preface This document, Cisco Video Surveillance 2611 IP Dome User Guide, provides information about installing, configuring, using, managing, and troubleshooting the Cisco Video Surveillance 2611 IP Dome, model CIVS-IPC-2611. Organization This manual is organized as follows: Chapter 1, “Overview” Provides an overview of the IP camera and its features Chapter 2, “Getting Started” Provides instructions for installing and performing the initial setup of the IP camera, connecting to the IP cam
ページ6に含まれる内容の要旨
Preface Cisco Video Surveillance 2611 IP Dome User Guide vi OL-24128-02
ページ7に含まれる内容の要旨
CH A P T E R1 Overview This chapter provides an overview of the Cisco Video Surveillance 2611 IP Dome features. It includes these topics: • Features, page 1-1 � IP Camera Overview, page 1-2 Features The Cisco Video Surveillance IP cameras offer a feature-rich digital camera solution for a video surveillance system. They provide high-quality, bandwidth-efficient video capture and transmission, with support for D1 resolution, motion-triggered viewing, H.264 encoding, and MPEG-4 encoding. Th
ページ8に含まれる内容の要旨
Chapter 1 Overview IP Camera Overview � Flexible scheduling—You can configure the IP camera to respond to events that occur within a designated schedule. � Syslog support—The IP camera can send log data to a Syslog server. � IP address filter—You can designate IP addresses that can access the IP camera and IP addresses that cannot access the IP camera. � User-definable HTTP/ HTTPS port number—Allows you to define the port that is used to connect to the camera through the Internet.
ページ9に含まれる内容の要旨
Chapter 1 Overview IP Camera Overview Physical Details Figure 1-1 and the table that follows describe the items on the top of the 2611 IP dome. Figure 1-1 Top of the 2611 IP Dome 1 2 3 4 6 5 1 Network LED (amber) Indicates information about the network connections as follows: � On—LAN connection is detected � Off—LAN connection is not detected � Blinking—Data is being transmitted or received via the LAN connection 2 Power LED (green) Lights for approximately 1 minute when the IP camer
ページ10に含まれる内容の要旨
Chapter 1 Overview IP Camera Overview 3 Audio port Allows the connection of the audio Y cable that is provided with the IP camera. You can connect an optional external speaker, optional external microphone (with pre-amplifier), or both devices through this cable. Each device connects to the audio cable through a standard 3.5 mm mini phone jack. A speaker connects to the green jack, which is labeled “Audio Out.” A microphone connects to the pink jack, which is labeled “Audio In.” 4
ページ11に含まれる内容の要旨
Chapter 1 Overview IP Camera Overview Figure 1-2 and the table that follows describe the items on the bottom of the 2611 IP dome. Figure 1-2 Bottom of the 2611 IP Dome 1 5 4 3 2 1 USB port Reserved for future use 2 Analog video output 3.5 mm video jack for video output to an analog monitor. 3 Reset button Recessed button that reboots the IP camera or resets it to a default state. You can use a pin or paper clip to depress it. It can be used any time that the IP camera is on and can have
ページ12に含まれる内容の要旨
Chapter 1 Overview IP Camera Overview 4 Network LED (amber) Indicates information about the network connections as follows: � On—LAN connection is detected � Off—LAN connection is not detected � Blinking—Data is being transmitted or received via the LAN connection 5 Power LED (green) Lights for approximately 1 minute when the camera powers up, then turns off. Package Contents The the Cisco Video Surveillance IP Camera package includes these items: � Cisco Video Surveillance 2611 IP
ページ13に含まれる内容の要旨
CH A P T E R2 Getting Started This chapter provides instructions for installing and performing the initial setup of the Cisco Video Surveillance IP Camera. It also describes how to access the IP camera through a web browser so that you can configure it or view video from it, and how to perform other important tasks. This chapter includes these topics: � Before Your Begin, page 2-1 � Installing the Cisco Video Surveillance 2611 IP Dome, page 2-2 � Performing the Initial Setup of the IP Ca
ページ14に含まれる内容の要旨
Chapter 2 Getting Started Installing the Cisco Video Surveillance 2611 IP Dome Warning The power supply must be placed indoors. Statement 331 Note If you use the IP camera outdoors, place the camera and the power supply in a suitable NEMA enclosure. Warning This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source or an IEC60950 compliant limited power source. Statement 353 Warning The plug-socket combination must be accessible at all times, becau
ページ15に含まれる内容の要旨
Chapter 2 Getting Started Installing the Cisco Video Surveillance 2611 IP Dome Preparing for Installation Before you install the 2611 IP dome, take these actions: � Carefully unpack the IP dome and its components. � Run an category 5 or higher network cable to the mounting location. � If the IP dome will not be powered from POE, run a power cable from a 12 VDC or 24 VAC power adapter to the mounting location. Use a cable gauge that is appropriate for the distance from the IP dome to
ページ16に含まれる内容の要旨
Chapter 2 Getting Started Installing the Cisco Video Surveillance 2611 IP Dome Recessed Mounting in a Ceiling Tile You can recess-mount the IP dome in a ceiling tile. With this method, the bottom edge of the IP dome housing is flush with a ceiling. The ceiling tile must be able to support at least three times the weight of the IP dome. An optional ceiling tile mount is available to reinforce a ceiling tile so that the tile provides adequate support. You can purchase the ceiling tile mo
ページ17に含まれる内容の要旨
Chapter 2 Getting Started Installing the Cisco Video Surveillance 2611 IP Dome 1 Camera housing 2 Camera unit 2 Camera unit screws 4 Privacy shield 5 Dome and trim ring assembly Step 4 Remove the ceiling tile from the location at which you want to mount the IP dome and cut a 6-1/2 inch (16.5 cm) diameter hole in the center of the tile. Step 5 Place the camera housing through the hole that you cut in the ceiling tile. Orient the camera housing so that the anchor clips face away from the b
ページ18に含まれる内容の要旨
Chapter 2 Getting Started Installing the Cisco Video Surveillance 2611 IP Dome Step 9 If the IP dome will not receive PoE, put the power cable through the camera housing and connect it to the power input on the IP dome (see Figure 1-1 on page 1-3). To connect a power cable, use a flat-head screwdriver to depress the brown tabs on the power input and connect bare positive, negative, and ground wires as shown on the label that is affixed to the IP dome. Step 10 (Optional) Connect an exter
ページ19に含まれる内容の要旨
Chapter 2 Getting Started Performing the Initial Setup of the IP Camera Performing the Initial Setup of the IP Camera After you install IP camera, or after you perform a factory reset procedure, you must access the IP camera and make initial configuration settings. These settings include administrator and root passwords, and whether the IP camera can be accessed through an HTTP connection in addition to the default HTTPS (HTTP secure) connection. To make these configuration settings, y
ページ20に含まれる内容の要旨
Chapter 2 Getting Started Accessing the IP Camera Windows Step 6 After the IP camera reboots, start Internet Explorer and, in the Address field, enter the following: protocol://ip_address where: � protocol is HTTPS or HTTP. (You can use HTTP only if you enabled it in Step 4.) � ip_address is the IP address that you used in Step 1. Step 7 If you are prompted to install ActiveX controls, which are required to view video from the IP camera, follow the on-screen prompts to do so. The Main
