ページ1に含まれる内容の要旨
3-863-913-11 (1)
Network Camera
SNC-M1/M1W/M3/M3W
Quick Start Guide Network Configuration Using a Router
The Quick Start Guide briefly explains the connections and settings of the camera for viewing the
camera image via Internet when connecting to the network using a router.
For the installation and operations of the camera, please refer to the Installation Manual and the
User's Guide in the supplied CD-ROM.
Flowchart of preparations
Quick Start Guide (this document) Installation Manual User
ページ2に含まれる内容の要旨
SNC-M3/M3W only 1 Check the Camera and Supplied z Wall-mounting holder z Wall-mounting Accessories (1) bracket (1) Before using, check that the camera and all the supplied accessories are included in the package. z Network camera (1) SNC-M3/M3W SNC-M1/M1W z +PSW screws (3 × 8) (2) or z AC power adaptor (1) z Power cord (1) 2 Check the Specifications of the Computer The following are the system requirements for the computer to view the image of the camera and to run the program of the suppl
ページ3に含まれる内容の要旨
Adobe, Acrobat and Acrobat Reader are trademarks of Adobe Systems Incorporated in the United States and/or other 4 Turn on the Power of the Camera countries. All other company and product names are trademarks or registered trademarks of the respective companies or their respective makers. 1 Insert the DC plug of the supplied AC power adaptor into the DC IN 5V jack on the camera. 3 Connect the Camera to the Router To make the network setting on the camera, connect the 2 Connect the pow
ページ4に含まれる内容の要旨
5 Install the IP Setup Program from 4 Click “Next.” the CD-ROM This section explains how to install the IP Setup Program from the CD-ROM supplied with the camera. The IP Setup Program is required for detecting the camera. The other supplied programs can be installed in the same procedures. Click. Utility programs stored in the CD-ROM The following utility programs are stored in the supplied CD-ROM. Program Function 5 Read the Software License Agreement IP Setup Program Allows detection a
ページ5に含まれる内容の要旨
7 Enter or select the name of the folder 1 Start the IP Setup Program. in which to install the program, then Select “Program” from the “Start” menu of Windows, then select “IP Setup Program.” click “Next.” The default setting is “IP Setup Program.” The IP Setup Program runs and displays all the cameras connected to the network in the camera list. 1Enter the folder name. 2 Click on the camera in which you want to assign an IP address. When multiple cameras are connected to the 2Click. same
ページ6に含まれる内容の要旨
To assign a static IP address 8 Click “OK.” Click on “Use the following IP address” and enter the IP address, subnet mask and default gateway. “Setting OK” is displayed. The network setting of the camera is completed. 4 Click on “Obtain DNS server address automatically.” By selecting “Obtain DNS server address Note automatically,” the DNS server addresses are To exit the IP Setup Program, click on the upper right automatically assigned. corner. Select this. DNS server addresses are display
ページ7に含まれる内容の要旨
8 Monitor the Image of the Camera 3 Click “Enter.” You can monitor the image of the camera using Internet Explorer as the Web browser. Note Click. This section uses illustrations of the Welcome page of Network Camera SNC-M1W. Accessing from Internet Explorer The image shot by the camera is displayed in the main viewer. 1 Start Internet Explorer. 2 Type the IP address in the URL box of Internet Explorer. To view the image via LAN: Enter the IP address recorded in step 7 on page 6. To view t
ページ8に含まれる内容の要旨
Setting for Wireless Network 4 Click “Network.” (SNC-M1W/M3W only) To use the camera in a wireless network via an access Click. point, set as follows. Use the network cable for connection when you assign a new IP address to the SNC-M1W/M3W wireless network camera. The “Network setting” menu appears. 1 Display the welcome page of the camera following the procedure of “Monitor the Image of the Camera” on 5 Click the “Wireless network” tab. page 7. 6 Set the items for the wireless network. 2
