ページ7に含まれる内容の要旨
Preparation 9 Set the IP address. To obtain the IP address automatically from a DHCP server: Select Obtain an IP address automatically. The IP address, Subnet mask and Default gateway are assigned automatically. Note When you select Obtain an IP address automatically, make sure that the DHCP server is operating on the network. To specify the IP address manually: Tip Select Use the following IP address, and type the The factory setting of the camera network is DHCP IP address, Subnet mask a
ページ8に含まれる内容の要旨
Preparation The viewer screen of the network camera is If the message “File Download – Security Warning” displayed on the Web browser. appears, click Run. Display sample Program name Note If you select Save in the “File Download – Security Warning” dialog, you will not be able to perform the installation correctly. Delete the downloaded file, and click the Setup icon again. Note If the message “Internet Explorer – Security Warning” If the IP address is not set correctly, the viewer does not
ページ9に含まれる内容の要旨
Preparation If the information bar appears, click on the bar and select 3 Select Off in the Windows Firewall dialog. Install ActiveX Control…. If “Internet Explorer – Security Warning” appears, click Install. Program name The installation of ActiveX Control starts. When installation is completed, the main viewer or the Motion detection menu appears. Configuring Windows Firewall The camera will be displayed in the list. SNC toolbox may not operate correctly depending on the configuration of W
ページ10に含まれる内容の要旨
Preparation 5 In the Add Program dialog, select SNC toolbox and If the pop-up “AutoPlay” appears when a CD-ROM is click OK. inserted into the CD-ROM drive, click Install or run program. SNC toolbox is added to the Programs and Services list. 6 Click OK. Program name Note If you click Open folder to view files, the Web browser will not open automatically. In this case, double-click the “index.htm” file in the CD-ROM. If the “Internet Explorer” message appears, click Yes. When the above proce
ページ11に含まれる内容の要旨
Preparation If the message “User Account Control – Windows needs Note your permission to continue” appears, click Continue. If you select Save in the “File Download – Security Warning” dialog, you will not be able to perform If the “Internet Explorer – Security Warning” message installation correctly. Delete the downloaded file, and appears, click Install. click the Setup icon again. If the message “Internet Explorer – Security Warning” appears, click Run. Program name Program name Installat
ページ12に含まれる内容の要旨
Preparation 4 Select Off in the General tab. 6 If the Add Program dialog appears, select SNC toolbox and click OK. SNC toolbox is added to the Program or port list. The cameras will be displayed in the list. 7 Click OK. To turn Windows Firewall on 1 Select Control Panel from the Start menu of Windows. 2 Click Windows Firewall. 3 Select Turn Windows Firewall on or off. If the message “User Account Control - Windows needs your permission to continue” appears, click Proceed. 4 Select Exceptions
ページ13に含まれる内容の要旨
Preparation If the message “File Download - Security Warning” When using Windows 7 appears, click Run. Installing software A warning message regarding the active contents may appear when you install software such as SNC toolbox from the CD-ROM. In this case, operate as follows: Example: In case of SNC toolbox If the pop-up “AutoPlay” appears when a CD-ROM is inserted into the CD-ROM drive, click Install or run program from your media. Note If you select Save in the “File Download - Security
ページ14に含まれる内容の要旨
Preparation To turn Windows Firewall on Configuring Windows Firewall SNC toolbox may not operate correctly depending on 1 Select Control Panel from the Start menu of the configuration of Windows Firewall. (No cameras are Windows. shown in the list even if they are detected.) In this case, confirm the Windows Firewall configuration as follows: 2 Click Windows Firewall. Example: In the case of SNC toolbox 3 Select Allow a program or feature through Windows Firewall. To turn Windows Firewall o
ページ15に含まれる内容の要旨
Preparation 5 Add program. Accessing the Camera Using the Web Browser After the IP address has been assigned to the camera, check that you can actually access the camera using the Web browser installed on your computer. Use Internet Explorer as a Web browser. 1 Start the Web browser on the computer and type the IP address of the camera in the URL address bar. The viewer window is displayed. Display sample When the above procedure is completed, the cameras connected in the local network are
ページ16に含まれる内容の要旨
Preparation When Internet Explorer 6 is used When the viewer of the camera is “Security Alert” dialog may appear according to the displayed for the first time status of the certificate. In this case, click Yes to “Security Warning” is displayed. When you click Yes, continue. ActiveX control is installed and the viewer is displayed. The viewer window is displayed (in SSL communication). Notes � If Automatic configuration is enabled in the Local When Internet Explorer 7 or Internet Explorer
ページ17に含まれる内容の要旨
Preparation When using antivirus software, etc., on the computer � When you use antivirus software, security software, personal firewall or pop-up blocker on your computer, the camera performance may be reduced, for example, the frame rate for displaying the image may be lower. � The Web page displayed when you log in to the camera uses JavaScript. The display of the Web page may be affected if you use antivirus software or other software described above on your computer. 17 Accessing the
ページ18に含まれる内容の要旨
Preparation Basic Configuration by the Administrator You can monitor the camera image by logging in with the initial conditions set for this network camera. You can also set various functions according to the installing position, network conditions or purpose of the camera. We recommend you configure the following items before monitoring images from the camera. Setting contents Setting menu Set the format of the image sent from the camera. Video codec Tab (page 40) Select the White Balance
ページ19に含まれる内容の要旨
Operating the Camera Operating the Camera Administrator and User This network camera identifies those who log in as the Administrator or User. This section explains how to monitor the image from the The Administrator can use all the functions of this camera using your Web browser (Internet Explorer). network camera, including camera settings. The User can use the functions for monitoring the image from the The functions of the camera should be set by the camera, and control the camera. Th
ページ20に含まれる内容の要旨
Operating the Camera Plug-in free viewer This viewer allows the user to select from three image Logging in to the System display methods: JPEG, JPEG/Flash or ActiveX viewer. JPEG method: JPEG images will be displayed in sequence. Logging in as a user JPEG/Flash method: JPEG images will be displayed in sequence. Adobe Flash is required to display the image. 1 Start the Web browser on your computer and type ActiveX viewer method: The image can be viewed when the IP address of the camera you w
ページ1に含まれる内容の要旨
4-194-204-12 (1)
Network Camera
User’s Guide
Software Version 1.2
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
SNC-CH110/CH210
SNC-DH210/DH210T
© 2010 Sony Corporation
ページ2に含まれる内容の要旨
Using the System Utility ......................................28 SNC viewer .......................................................28 Table of Contents SNC Desktop viewer ........................................30 Overview Administrating the Camera Features .................................................................. 4 Basic Operations of the Administrator Menu ...32 How to Use This User’s Guide .............................. 5 How to set up the Administrator menu .............32 System R
ページ3に含まれる内容の要旨
Common Tab — Setting the e-Mail (SMTP) Function .......................................................... 64 Alarm sending Tab — Setting the e-mail sending mode when detecting the alarm ...................... 66 Periodical sending Tab — Setting the periodical e-mail sending mode ...................................... 67 Sending Images to FTP Server — FTP Client Menu .....................................................................68 Common Tab — Setting the FTP client function ........
ページ4に含まれる内容の要旨
Overview NOTICE TO USERS Overview © 2010 Sony Corporation. All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written Features approval from Sony Corporation. � High quality streaming, maximum image size SONY CORPORATION PROVIDES NO (2048 × 1536 (SNC-CH210/DH210/DH210T)/ WARRANTY WITH REGARD TO THIS MANUAL, 1280 × 960 (SNC-CH110)). THE SOFTWARE OR OTHER INFORMATION
ページ5に含まれる内容の要旨
Overview How to Use This User’s System Requirements Guide The following computer environment is necessary for the computer to display images and the controls of the This User’s Guide explains how to operate the Network camera. Camera from a computer. (June 2010) The User’s Guide is designed to be read on the computer display. CPU This section gives tips on making the most of the User’s Intel Core 2 Duo, 2 GHz or higher Guide-read it before you operate the camera. Memory Jumping to a relate
ページ6に含まれる内容の要旨
Preparation Assigning an IP address using SNC Preparation toolbox The Preparation section explains what the administrator 1 Insert the CD-ROM in your CD-ROM drive. has to prepare for monitoring images after installation A cover page appears automatically in your Web and connection of the camera. browser. If it does not appear automatically in the Web browser, double-click the index.htm file on the CD-ROM. Assigning the IP When you are using Windows Vista, the “Auto Address to the Camera
