ページ1に含まれる内容の要旨
DocuMate 510
scanner
installation guide
ページ2に含まれる内容の要旨
DocuMate 510 scanner installation guide
ページ3に含まれる内容の要旨
Copyright © 2007 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. XEROX ® is a trademark of Xerox Corporation in the United States and/or other countries and is used under license. DocuMate ® is a registered trademark of Xerox Corporation used under license. All other Xerox product names and product numbers mentioned in this publication are trademarks of Xerox Corporation. The Visioneer brand
ページ4に含まれる内容の要旨
Table of Contents Welcome What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 The Xerox DocuMate 510 Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Documentation . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Scanning with the TWAIN Interface from PaperPort Accessing the TWAIN Interface from PaperPort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 The Two TWAIN Interface Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Scanning from the TWAIN Basic Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Scanning from the TWAIN Advanced Interface . . . . . . . .
ページ6に含まれる内容の要旨
Welcome Your new Xerox DocuMate 510 scanner can scan stacks of documents or a single page at a time, and place their images on your computer. WARNING: Do not plug in the USB cable until after you have installed the software. Carefully follow the steps and sequence described in the installation procedure beginning on page 5. What’s in the Box Before starting the scanner assembly and software installation, please check the contents of the box to make sure that all parts are included. If any
ページ7に含まれる内容の要旨
Welcome The Xerox DocuMate 510 Scanner Document Cover Document Pad Glass Reference Frame Paper Stop Paper Guide Extension Paper Guide Automatic Document Feeder Lock (on underside of scanner) Status Lights USB Port ADF port Power jack Power On/Off Switch ADF Cable 2 DocuMate 510 Scanner User’s Guide
ページ8に含まれる内容の要旨
Welcome Document Cover—Protects the document from light and contamination during scanning. Document Pad—Helps to secure the document in place on the scanner glass. Reference Frame—Place items face down within this frame. Markings on the border of the frame show where to align various paper sizes. Glass—Place items face down aligned at the upper left corner of the glass. Paper Stop—Holds items in place as they are ejected from the Automatic Document Feeder. Adjust the Paper Stop for letter-
ページ9に含まれる内容の要旨
Welcome What You Need IBM-compatible Pentium 4 PC, or AMD equivalent with: • A CD-ROM drive • An available Universal Serial Bus (USB) port ® ® •Microsoft Windows operating system: Windows 2000 (Service Pack 4), Windows XP (Service Pack 1 and 2), or Windows Vista • Windows 2000 and XP: Minimum of 512 megabytes (MB) of internal memory (RAM) Windows Vista: Minimum of 1 gigabyte (GB) of internal memory (RAM) • 350 MB minimum of free hard disk space A VGA or SVGA Monitor The recommended settings
ページ10に含まれる内容の要旨
Installation Installation Installation is a quick, four-step process: 1. Assemble the scanner 2. Install the software 3. Connect the power supply 4. Connect the USB cable and turn on the power Before You Begin Please make sure of the following before you begin installation: • The information in this guide may cover software not provided with the scanner you purchased. Please disregard any information about the software not applicable to your scanner. Visit our web site at www.xeroxscanners.c
ページ11に含まれる内容の要旨
Installation Step 1: Assemble the Scanner All the components to assemble the scanner are included in the box. To assemble the scanner: 1. Remove all shipping tape from the top and bottom of the scanner. 2. Open the ADF cover and carefully remove any foam particles that may have gotten inside the Automatic Document Feeder. Close the cover so it snaps shut. 6 DocuMate 510 Scanner User’s Guide
ページ12に含まれる内容の要旨
Installation 3. Slide the locking tab on the bottom of the scanner to its unlocked position. Unlocked position NOTE: The locking tab protects the scanner’s scan head by holding it securely in position. Lock the scanner when transporting it from one location to another, but always remember to unlock it before scanning. The scanner will not scan when locked. 4. Insert the slots (A) on the Paper Guide onto their tabs (B) on the scanner and slide the Guide down into place. The catch tabs (C) s
ページ13に含まれる内容の要旨
Installation 5. Insert the Paper Guide Extension into the Paper Guide and snap its tabs into place. 6. Insert the Paper Stop onto the back of the scanner and slide it downward to snap its tabs into place. 7. Plug the ADF cable into the ADF port. Tighten the two locking screws on either side of the plug to make sure the ADF cable is securely plugged into the port. The ADF will not function properly if the ADF cable is loose or unplugged. 8. Proceed to “Step 2: Install the Software”. 8 DocuMa
ページ14に含まれる内容の要旨
Installation Step 2: Install the Software The Installation CD includes all the necessary installation files, as well as the PaperPort software files. To install the software: 1. Start Microsoft Windows and make sure that no other applications are running. 2. Insert the installation CD into your computer’s CD-ROM drive. The CD automatically starts. NOTE: If the CD does not start, check the following: • Make sure the CD drive’s door is completely shut. • Make sure the CD was inserted in the dri
ページ15に含まれる内容の要旨
Installation 3. On the Main Menu, select Install Products. ® 4. Make sure the boxes for Nuance PaperPort and Scanner Driver are checked. 5. Click Install Now. The PaperPort installation begins: 1. The Select Language window opens. Click the drop-down menu arrow and select the language to use. Click OK. The first PaperPort Installation window opens. 2. On the PaperPort Welcome window, click Next. Installing PaperPort will uninstall any existing version of PaperPort and will install the newer
ページ16に含まれる内容の要旨
Installation 3. Read the PaperPort license agreement and select I accept the terms in this agreement, then click on Next. If you choose not to accept the license agreement, the installation will terminate and the PaperPort software will not be installed. 4. On the Customer Information window, accept the current values or enter new information, then click Next. 5. On the Setup Type window, keep the default Setup Type and click Next. 6. Click Install to begin the installation. Reminder: If yo
ページ17に含まれる内容の要旨
Installation 3. On the Xerox License Agreement window, read the license agreement. If you accept the terms, select I Agree. If you choose not to accept the license agreement, the installation will terminate and the scanner driver will not be installed. 4. Click Next The next window lists the choices of the drivers that you can install for your scanner. 5. Select the option you want. NOTE: If your computer is running Windows XP or Windows Vista, Microsoft’s Windows Image Acquisition (WIA) in
ページ18に含まれる内容の要旨
Installation 6. Click Next. During installation you will see this window asking you to select one of the images for your Color Space setting. The Color Space setting sets the gamma value for the scanner so scanned items look good on your monitor. Gamma controls the brightness of the midtones of colors. That setting can be changed later as you’re scanning. 7. Select the option that looks best to you and click Next. The driver installation will now begin. 8. STOP when you see the “Complete the
ページ19に含まれる内容の要旨
Installation Step 3: Connect the Power Supply Connect the power supply and power cord, and plug the power supply into an electrical outlet. To connect the power supply: 1. Plug the power supply into its power port on the scanner. NOTE: Only use the power supply (HEG42-240200-7L made by HiTron) included with your scanner. Connecting any other type of power supply may damage your scanner, and will void its warranty. 2. Plug the power cord into the power supply and then into a wall outlet. Now
ページ20に含まれる内容の要旨
Installation Step 4: Connect the USB Cable and Turn on the Power The DocuMate 510 scanner connects to any available USB port. Check your computer’s manual for USB port locations. NOTE: You can connect the scanner to your computer while the computer is running. 1. Remove any protective tape from the USB cable. 2. Plug the USB cable into the USB port on the scanner then into a USB port on the computer. Connection to a USB 2.0 High Speed port provides optimum performance, however your scanner
