ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
LOCATIONS CORPORATE HEADQUARTERS EUROPEAN, MIDDLE EAST & AFRICAN NORTH AMERICA HEADQUARTERS USA, NEW JERSEY GERMANY, MUNICH Metrologic Instruments, Inc. Metrologic Instruments GmbH Tel: 1-800-ID-METRO Fax: 856-228-6673 Tel: 49-89-89019-0 Fax: 49-89-89019-200 Email: info@metrologic.com Email: info@europe.metrologic.com SOUTH AMERICA, BRAZIL SÃO PAULO GERMANY, MUNICH Metrologic do Brasil Ltda. Metrologic Instruments GmbH Tel: 55-11-5182-8226 Fax: 55-11-5182-8315 Tel: 49-89-89019-0 Fax:
ページ4に含まれる内容の要旨
TABLE OF CONTENTS Introduction Product Overview ............................................................................................. 1 Scanner and Accessories................................................................................. 2 Scanner Components....................................................................................... 4 Maintenance..................................................................................................... 4 Caution and Serial Number
ページ5に含まれる内容の要旨
INTRODUCTION ™ Quantum E is a miniature, omni-directional scanning engine with optional single- line scanning capability. The self-contained device is fully enclosed eliminating the need for an external window or custom enclosure. It is designed for use in OEM equipment such as price lookup systems and kiosks. Its slim design makes it ideal for integration and use with flat-screens. Key Product Features • Fully Automatic Scanning Operation • PowerLink Compatible • Data Editing • 7 Beeper Tone
ページ6に含まれる内容の要旨
INTRODUCTION Scanner and Accessories BASIC KIT COMPONENTS Part No. Description IS3480 Quantum™E Scanner 00-02026 IS3480 Installation and User’s Guide * ® 00-02407 MetroSelect Configuration Guide * 00-02090 IS3480 Supplemental Configuration Guide * * Guides also available for download at www.metrologic.com. OPTIONAL ACCESSORIES Part No. Description AC to DC Power Transformer - Regulated 5.2VDC @ 650 mA output. 45-45593 120V United States and Canada 45-45591 220V-240V Continental European 45-45592
ページ7に含まれる内容の要旨
INTRODUCTION Scanner and Accessories OPTIONAL ACCESSORIES Part No. Description 54-54002x-3 Keyboard Wedge PowerLink cable 54-54020x-3 Stand Alone Keyboard PowerLink cable USB Locking Power/Communication Cable, 54-54213x-N-3 3 m (10') straight cord, short strain relief Full Speed USB Locking Power/Communication Cable, 5 m (17') straight cord, short strain relief 54-54214x-N-3 This cable is for use with full speed USB (-40) interface only. Low Speed USB Non-Locking Communication Cable 54-54235x-N-
ページ8に含まれる内容の要旨
INTRODUCTION Scanner Components Figure 1. Scanner Components ITEM NO. DESCRIPTION Utility Connector Located Under Rubber Seal The rubber seal protecting the utility connector should only be removed if the utility connector is to be used. 10-Pin RJ45, Female Socket Blue, White and Yellow LED Indicators Red Output Window (Laser Aperture) Pin Hole for Cable Release Speaker Three M2.5 x 0.45 Threaded Mounting Points Two M2.5 x 0.45 Threaded Mounting Points Button Maintenance Smudges and dir
ページ9に含まれる内容の要旨
INTRODUCTION Caution and Serial Number Labels Figure 2. Mounting Specifications Figure 3. 5
ページ10に含まれる内容の要旨
INSTALLATION RS232, RS232 TTL or Light Pen 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the PowerLink cable into the 10-pin socket on the IS3480. 3. Connect the 9-pin female end of the PowerLink cable to the host device. Note: Skip to step 6 if receiving power from the host device. 4. Plug the external power supply into the power jack on the PowerLink cable. Check the AC input requirements of the power supply to make sure the voltage matches the AC Figure 4. outlet. The outl
ページ11に含まれる内容の要旨
INSTALLATION IBM 46xx or OCIA 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the MVC cable into the 10-pin socket on the IS3480. 3. Connect the other end of the MVC cable to the host device. 4. Turn on the host device. Figure 5. When the scanner first receives power, the blue LED will turn on; the scanner will simultaneously beep once and flash the white LED. Plugging the scanner into the serial port of the PC does not guarantee that scanned information will appear at the PC.
ページ12に含まれる内容の要旨
INSTALLATION Keyboard Wedge 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the PowerLink cable into the 10-pin socket on the IS3480. 3. Disconnect the keyboard from the host device. 4. Connect the “Y” end of the PowerLink cable to the keyboard and the keyboard port on the host PC. If necessary use the male/female adapter cable supplied with the scanner for proper connections. 5. Plug the external power supply into the power jack on the PowerLink cable. Check the AC input requi
ページ13に含まれる内容の要旨
INSTALLATION Stand-Alone Keyboard Wedge 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the PowerLink cable into the 10-pin socket on the IS3480. 3. Connect the other end of the PowerLink cable to the keyboard port on the host device. 4. Plug the external power supply into the power jack on the PowerLink cable. Check the AC input requirements of the power supply to make sure the voltage matches the AC outlet. The outlet must be located near the equipment and be easily accessibl
ページ14に含まれる内容の要旨
INSTALLATION Full Speed or Low Speed USB (Integrated) 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the USB PowerLink cable into the 10-pin socket on the IS3480. 3. Plug the other end of the USB interface cable into the host device’s USB port. 4. Plug the external power supply in to the power jack on the USB PowerLink cable. Check the AC input requirements of the power supply to make sure the voltage matches the AC outlet. The outlet must be located near the equipment and be
ページ15に含まれる内容の要旨
INSTALLATION Notes for Low Speed USB (External with MX009) Metrologic’s MX009 USB cable is a device that converts serial RS232 formatted data to either USB Keyboard or USB Point-of-Sale communication protocol. Please refer to the MX009 USB Converter Cable Programming Guide (MLPN 00-02574) supplied with your MX009 cable for detailed installation and programming guidelines. Notes for Laser Emulation IS3480-00 Only The IS3480-00 leaves the factory with the Laser Emulation Mode enabled. If the Reca
ページ16に含まれる内容の要旨
SCANNER OPERATION Configurable Primary and Secondary Scan Pattern Modes There are two configurable scan pattern modes available with the IS3480. • The primary scan pattern mode is the default scan pattern active when the scanner starts. • The secondary scan pattern mode is activated by pressing the button located on the side of the scanner. This mode is also referred to as the button mode. For additional information on QuantumE’s button modes and an example of each, please refer to Configurabl
ページ17に含まれる内容の要旨
SCANNER OPERATION Configurable Button Functions SECONDARY SCAN PATTERN BUTTON CLICK MODE WITH CODEGATE ENABLED For illustration purposes the unit’s primary scan pattern has been set to all scan lines (omnidirectional reading) and the secondary pattern has been set to single-line (menu reading) with a 10 second button click timeout configured. 1. The primary scan pattern is active when the scanner starts. 2. To activate the secondary scan pattern, press and release the button. 3. To decode and tr
ページ18に含まれる内容の要旨
SCANNER OPERATION Configurable Button Functions SECONDARY SCAN PATTERN BUTTON CLICK MODE WITH CODEGATE DISABLED For illustration purposes the unit’s primary scan pattern has been set to all scan lines (omnidirectional reading) and the secondary pattern has been set to single-line (menu reading) with a 10 second button click timeout configured. 1. The primary scan pattern is active when the scanner starts. 2. To activate the secondary scan pattern, press and release the button. 3. The unit will b
ページ19に含まれる内容の要旨
SCANNER OPERATION Configurable Button Functions SECONDARY SCAN PATTERN BUTTON HOLD MODE WITH CODEGATE ENABLED For illustration purposes the unit’s primary scan pattern has been set to all scan lines (omnidirectional reading) and the secondary pattern has been set to single-line (menu reading) with a 10 second button click timeout configured. 1. The primary scan pattern is active when the scanner starts. 2. To activate the secondary scan pattern, press and hold the button. 3. To scan the bar code
ページ20に含まれる内容の要旨
SCANNER OPERATION Configurable Button Functions SECONDARY SCAN PATTERN BUTTON HOLD MODE WITH CODEGATE DISABLED For illustration purposes the unit’s primary scan pattern has been set to all scan lines (omnidirectional reading) and the secondary pattern has been set to single-line (menu reading) with a 10 second button click timeout configured. 1. The primary scan pattern is active when the scanner starts. 2. To activate the secondary scan pattern, press and hold the button. 3. To scan and transmi
