ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Scanner models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Scanner features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Speed/capacity (throughput) . . . . . . . . . . . .
ページ3に含まれる内容の要旨
Calibrating the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 Image calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 Ultrasonics calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14 4 The Enhanced Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
1 Introduction This User’s Guide provides information and procedures for the Kodak i600 Series Scanners. The information in this guide is for use with all of the i600 Series Scanners unless otherwise noted. Chapter 1, Introduction — provides general information about the i600 Series Scanners including a product description, scanner features, safety information and user precautions. Chapter 2, Getting Started — includes specifications and instructions on how to install the Kodak i600 Series
ページ5に含まれる内容の要旨
Scanner models • Kodak i610 Scanner is a desktop duplex black and white and grayscale scanner with an automatic document feeder that runs at 80 pages per minute which includes an enhanced printer. • Kodak i620 Scanner is a desktop duplex color scanner with an automatic document feeder that runs at 80 pages per minute which includes an enhanced printer. • Kodak i640 Scanner is a desktop duplex color scanner with an automatic document feeder that runs at 100 pages per minute which includes a
ページ6に含まれる内容の要旨
• Automatic and manual feeding. • JPEG compression allows color and grayscale images to be viewed in most image viewers. • Image processing features include: iThresholding, Adaptive Threshold Processing, orthogonal rotation, color, black and white and grayscale deskew, auto-crop, automatic color detection, aggressive cropping, error diffusion, toggle patch, auto-color balancing (auto- white balancing) to ensure good color balance after calibration, and more. • Easily replaceable feed module
ページ7に含まれる内容の要旨
Safety information Warning labels CAUTION: Moving parts, avoid contact. CAUTION: Hot surface, avoid contact. MSDS Material Safety Data Sheets (MSDS) are available on the Kodak website at: www.kodak.com/go/msds. When accessing the MSDSs from the website, you will be required to provide the catalog number of the consumable you want the Material Safety Data Sheet for. See Chapter 5, “Supplies and accessories” for consumables and catalog numbers. User precautions Users and their employer need t
ページ8に含まれる内容の要旨
EMC statements United States This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequently energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to rad
ページ9に含まれる内容の要旨
2 Getting Started Site specifications Place the scanner: • In a clean area with temperature and relative humidity typical of an office environment, • on a stable, level work surface, • within 1.52 metres (5 feet) of an electrical power outlet. IMPORTANT: Only use the scanner indoors in a dry location. For more information about the scanner specifications, refer to Appendix B, Specifications. System requirements Following is the minimum recommended system configuration to run Kodak i600 Series
ページ10に含まれる内容の要旨
Making connections Follow the instructions for installing the IEEE-1394 (FireWire) card and the Kodak driver software before you plug the scanner into the host computer. IMPORTANT:You must install the software on the host computer before you connect the scanner. Installing the IEEE-1394 Install the IEEE-1394 (FireWire) card according to the directions supplied with the IEEE-1394 card. card in the host computer IMPORTANT: Use proper precautions to avoid static when you install the IEEE-139
ページ11に含まれる内容の要旨
Attaching the power cord The Kodak i600 Series Scanner is packed with a set of power cords. 1. Select the power cord which complies with your electrical requirements and attach it. 2. Turn on the scanner and wait until the top green LED is lit indicating the scanner has completed power-up self-test and is idle. Powering up the host • Turn the power on to the host computer. computer Scanner components Front view 10 5 12* 4 3 6 7 1 8 9 11 2 1 Elevator tray extender — open the elevator tray ext
ページ12に含まれる内容の要旨
7 Stop/Pause and Start/Resume buttons — Stop/Pause (white with red triangle) button: press once to temporarily pause scanning (the green button can then use used to resume scanning). Press twice to stop scanning (end of job). Start/Resume (green) button: to start scanning. 8LEDs— illuminate or flash from top to bottom as follows: Illuminates when the power is turned on and the scanner is idle. This indicator will flash if the scanner is in “sleep” or lamp saver mode. illuminates when the s
ページ13に含まれる内容の要旨
Internal components Rollers Imaging guides Ink blotter strips Separation roller Pre-separation pad Separation roller — provides smooth document feeding of various sizes and textures one document at a time. Ink blotter strips — collects residue from the Enhanced Printer. Imaging guides — the scanner has an upper and lower imaging guide. It is important to keep the imaging guides clean to obtain optimum image quality. CAUTION:Hot surface, avoid contact. Rollers — drive rollers and NFR rollers
ページ14に含まれる内容の要旨
Sensors — the scanner has 3 (ultrasonic) multi-feed detection sensors, 1 (optical) paper path sensor and 1 (optical) paper present sensor. These sensors detect the presence of documents in the elevator tray and documents in the paper path during feeding and imaging. Ultrasonic sensors Paper Path sensor Paper Present sensor Rear view Power cord connection IEEE-1394 connection Retainer clip Power Cord Connection — provides power to the scanner. The scanner is packed with six power cords. Ch
ページ15に含まれる内容の要旨
3 Using the Scanner This chapter provides the following operational procedures: • Turning on/off the scanner • Starting, stopping, pausing and resuming the scanner • Document preparation • Adjusting the side guides and output tray • Scanning documents • Feeding long documents • Automatic, continuous and manual feeding • Calibration Turning the scanner • Press the button on the scanner’s lower right-side (I) to power it up. on and off • Press the button on the scanner’s lower right-side (O) to p
ページ16に含まれる内容の要旨
Manually pausing While scanning documents: and resuming the • Press the Stop/Pause button on the scanner once to pause scanning. scanner NOTE: Your application may configure the scanner with a transport timeout function which signals an End of Job. If you do not start/ resume scanning before the timeout expires, you cannot continue scanning without restarting the job from the host application. • Press the Start/Resume button on the scanner to restart scanning after it has been paused. St
ページ17に含まれる内容の要旨
Document Before you begin scanning documents, make certain the documents can be fed through the scanner easily. preparation • A batch of documents to be fed into the scanner must be arranged so the leading edges of all documents are aligned and centered under the feed module; this allows the feeder to introduce documents into the scanner one at a time. • Staples and paper clips in documents may damage the scanner and documents. Remove all staples and paper clips before scanning. • Document
ページ18に含まれる内容の要旨
Maximum Document Size: 30.5 x 86 cm (12 x 34 in.). Documents larger than 43 cm (17 in.) require operator assistance. Paper inks: All inks on the paper must be dry before scanning is started. This includes: Standard offset printing, Inkjet printer, Thermal transfer, Handwriting inks. Correction Fluids: Liquid Paper®, Tipp-Ex®, Wite-out®, and other similar correction fluids. Feeder Capacity: The elevator tray can hold up to 500 sheets of 2 75 g/m (20 lb.) paper. Adjusting the side To accommo
ページ19に含まれる内容の要旨
Locking the side guides Side guides may be locked into position after they are adjusted. This may be helpful when the placement of print strings is important. If you want to lock the side guides into position, move any documents which may be in the input tray and move the locking switch into the locked position. Adjusting the back of Different paper types stack differently. The output tray can be set in either one of two positions. In addition, you can raise the front of the the output tray
ページ20に含まれる内容の要旨
Adjusting the front of To raise the front of the output tray: the output tray 1. Lift the front of the output tray. 2. Swing the height adjustment wire out from underneath the output tray and insert it into the groove on the printer access cover. 3. When finished using the output tray in this position, tuck the height adjustment wire back into position and lower the output tray. Adjusting the output To adjust the output tray to accommodate long documents from 37 cm 14.5 in.) to 43 cm (17 in.