ページ1に含まれる内容の要旨
i30 / i40 Scanners
User’s
Guide
A-61512
ページ2に含まれる内容の要旨
Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Scanner features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 MSDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety and regulatory agency approvals . . . .
ページ3に含まれる内容の要旨
Using the TWAIN Datasource . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Kodak Scanner Properties dialog box . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Buttons on the Kodak Scanner Properties dialog box. . . . . . . . . . . 36 The Imaging tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Scanning bi-tonal images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Scanning color images . . . . . . . . .
ページ4に含まれる内容の要旨
1 Introduction The Kodak i30 and i40 Scanners are compact document scanners perfect for workgroups and other decentralized applications.These scanners have a 50-page automatic document feeder that scans 25 lettersize, 200 dpi, pages per minute. For your image processing needs, the TWAIN Datasource and ISIS Driver are included with the Kodak i30/i40 Scanners. • Kodak i30 Scanner — desktop simplex color scanner Kodak i40 Scanner with Kodak i40 Scanner with output tray special document feede
ページ5に含まれる内容の要旨
Scanner features • Easy to use • Small, compact size • Scans up to 21.6 x 86 cm / 8.5 x 34 inches using the automatic document feeder when the host PC is configured with adequate memory. See the section entitled, “System requirements” for more information. • Optional special document feeder provides easy manual feeding of small-sized documents, such as checks, credit cards, etc. one at a time. • Scans 25 ppm (200 dpi, bi-tonal, duplex, portrait orientation) letter- size documents • Choose
ページ6に含まれる内容の要旨
Safety information MSDS Material Safety Data Sheets (MSDS) for chemical products are available on the Kodak website at: www.kodak.com/go/msds. When accessing the MSDSs from the website, you will be required to provide the catalog number of the consumable you want the Material Safety Data Sheet for. See the section entitled, “Supplies and consumables” later in this guide for supplies and catalog numbers. Safety and regulatory The Kodak i30 and i40 Scanners conform to applicable national and
ページ7に含まれる内容の要旨
EMC statements United States This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, th
ページ8に含まれる内容の要旨
Acoustic emission Maschinenlärminformationsverordnung – 3, GSGV Der arbeitsplatzbezogene Emissionswert beträgt <70 db(A). [Machine Noise Information Ordinance — 3, GSGV The operator-position noise emission value is <70 dB(A).] Power system This product is also designed for Norwegian IT power system with phase-to-phase voltage 230V. connection European Union This symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate facilities for recovery and
ページ9に含まれる内容の要旨
2 Getting Started What’s in the box Before you begin open the box and check the contents: • Kodak i30 or i40 Scanner • Input tray • Special document feeder (Kodak i40 Scanners only) • Output tray • Feed module(s) • USB 2.0 cable • Power supply • AC power cord bundles • Welcome Folio which includes: - Bundled installation and application CDs - Registration sheets - Printed User’s Guide, English - Service Contact sheets - Quick Installation Guide -Quick Tips Guide - Miscellaneous flyers System r
ページ10に含まれる内容の要旨
Installing the scanner Install the scanner in the following order: 1. Assemble the scanner 2. Install the Kodak Driver Software 3. Verify that you have a USB port 4. Connect the power cord to the scanner 5. Connect the USB cable between your scanner and PC 6. Turn on scanner power and finalize the Kodak Driver Software installation 7. Install other supplied applications (optional) IMPORTANT: • Install the Kodak Driver Software on the host PC before you connect the scanner. • Some operating sys
ページ11に含まれる内容の要旨
Attaching the output tray and special document feeder 1. Locate the output tray holes on the scanner. 2. Insert the pin on the left side of the output tray/special document feeder in the hole, then press the ribbed button on the right side of the output tray/special document feeder and insert the pin in the hole on the right side of the scanner. Installing the Kodak Install the driver software before connecting the scanner to your PC. Driver Software 1. Insert the Kodak i30/i40 Scanner Inst
ページ12に含まれる内容の要旨
NOTE: This window may or may not be displayed depending upon what was previously installed on your computer. 4. Click Yes. The Welcome window will be displayed: 5. Click Next. The Software License Agreement window will be displayed: 6. After reading the agreement, click I Agree to continue. A-61512 May 2006 9
ページ13に含まれる内容の要旨
7. Enter your name and company name and click Next. 8. When the installation is complete, the following dialog box will be displayed. 9. Click Finish. 10 A-61512 May 2006
ページ14に含まれる内容の要旨
Verifying for a USB port After you install the Kodak Driver Software, check for the presence of a USB port. • Select USB Test. The USB verification tool will check your operating system and hardware capability to determine if you need to install the USB card. • If a functioning USB 2.0 port is present, the following window will be displayed. Click OK and proceed with the next section. • If your PC does not have a USB 2.0 port installed the following window will be displayed, you should inst
ページ15に含まれる内容の要旨
Connecting the power When the drivers have been installed, connect the power supply and power cord to the scanner. Make sure that the power outlet is located cord to the scanner within 1.52 metres (5 feet) of the scanner and is easily accessible. 1. Select the appropriate AC power cord for your region from the supply of power cords packed with your scanner. NOTE: The power cord for the United States/Canada and China look very similar. The difference is the United States/ Canadian power cord
ページ16に含まれる内容の要旨
Connecting the USB IMPORTANT: If you have not installed the Kodak Driver Software, do that now before proceeding. cable The following instructions explain the connection of the USB cable between your scanner and PC. You need to identify the USB port on your PC. If you installed the USB 2.0 card, use that port, otherwise use the USB port on your PC. The USB cable supplied with your scanner has two different ends. A B 1. Attach the B end of the USB cable to the scanner USB port, located on t
ページ17に含まれる内容の要旨
1. Use the power switch on the back of the scanner to turn the scanner on (I). When you turn on the scanner, the scanner goes through a series of self tests, the green indicators will flash. When it is finished and ready to scan, the LED indicator will stop flashing and stay green. NOTES: • If the scanner does not pass the self test, refer to Chapter 6, Troubleshooting. • The following screens are based on Windows 2000. However, depending on the computer operating system you are using, the
ページ18に含まれる内容の要旨
Installing application The following Kodak scanning applications are available on the CDs packed with your scanner. software • Kodak Capture Lite Software. • Kodak Scan Validation Tool. Refer the section entitled, “Verifying your scanner installation” in Chapter 3 for installation instructions and use. Other scanning applications are also provided on the CDs packed with your scanner. Review these CDs for the other applications that are included. You may also use other capture applications
ページ19に含まれる内容の要旨
Scanner components Front view Input tray Function window Arrow button Scanner cover Start button release button Indicator LED light Output tray or special docu- ment feeder Scanner cover Output tray extension Input tray — holds up to 50 documents in place. Adjusts to fit the document size. Function window — displays 1 through 9. These numbers correspond to a predefined function of an associated application of your choice. See the section entitled, “Kodak Button Manager” in Chapter 3 for more
ページ20に含まれる内容の要旨
Inside view Feed module Paper present sensor Rollers Left-edge sensor Calibration guides Rollers — provides smooth document feeding of various sizes, thicknesses and textures of documents. Calibration guides — for optimum image quality, keep the calibration guides clean. There are two guides - one upper and one lower. Feed module — provides smooth document feeding and separation of various sizes, thicknesses and textures of documents. Paper present sensor/Left-edge sensor — detects the
