ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
i200 Series Scanners User’s Guide A-61167 P/N 3E9296
ページ3に含まれる内容の要旨
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Scanner Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Paper Transport Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Speed/Capacity (Throughput) . . . . . . . .
ページ4に含まれる内容の要旨
Input and Output Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Attaching the Input Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Attaching the Output Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Tray Extenders and Side Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Adjusting the Output Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Appendix A Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Appendix B Supplies and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Appendix C KODAK i200 Series Imprinter . . . . . . . . . . . . . . . . . . . . . . . . C-1 Contents of the Imprinter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 Installing the Imprinter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Introduction Before you install and operate your KODAK i200 Series Scanner, take a few minutes to read through this guide. It contains important information about installing, using, and maintaining your scanner. • KODAK i250 Scanner is a desktop simplex color scanner with an automatic document feeder. KODAK i260 Scanner is a desktop duplex color scanner with an automatic document feeder. Optional Accessories KODAK i200 Series Imprinter—prints a date, time, fixed string, and/or sequenti
ページ7に含まれる内容の要旨
Paper Transport Automatic and manual feeding Features Multifeed detection by document length and/or document thickness Automatic feeder with operator-assisted “infinite” and single-sheet feeding Speed/Capacity The following speeds in pages per minute (ppm) are for color, grayscale, or bitonal output. (Throughput) Resolution Landscape A4 Portrait Letter i250 Scanner i260 Scanner i250 Scanner i260 Scanner 150 dpi 67 ppm 67 ppm 53 ppm 53 ppm (134 ipm) (106 ipm) 200 dpi 50 ppm 50 ppm 40 ppm
ページ8に含まれる内容の要旨
Preparing Documents A batch of documents to be fed into the scanner must be arranged so that the leading edges of all documents are aligned and centered under the for Scanning automatic paper feeder; this allows the feeder to introduce documents into the scanner one at a time. Documents must be positioned face down for scanning. Staples and paper clips in documents may damage the scanner. Remove all staples and paper clips before scanning. Torn, damaged, or crushed pages can be transp
ページ9に含まれる内容の要旨
Safety Information When placing the scanner, make sure that the electrical power outlet is located within 1.52 metres (5 feet) of the scanner and is easily accessible. CAUTION: The power supply must only be used indoors in a dry location. Warning Labels CAUTION: High voltage. Avoid contact. CAUTION: Hot surface. Avoid contact. CAUTION: Moving parts. Avoid contact. WARNING: The scanner front panel must be in place and closed during scanner operation. WARNING: The printer access door must be i
ページ10に含まれる内容の要旨
Safety and Regulatory The KODAK i200 Series Scanners conform to all applicable national and international product safety and electronic emission regulatory requirements. Agency Approvals This includes, but is not limited to, the following: Underwriters Laboratories Inc. listing to UL 60950 Third Edition Underwriters Laboratories Inc. listing to CAN/CSA C22.2 No. 60950-00 Third Edition TUV Rheinland of North America approval to EN60950 CFR 47 Part 15, Subpart B (FCC Class A) Canadian
ページ11に含まれる内容の要旨
EMC Statements For the United States This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference
ページ12に含まれる内容の要旨
Installing the Scanner Site Specifications Place the scanner: in a clean area with temperature and relative humidity typical of an office environment IMPORTANT: Only use the scanner and power supply indoors in a dry location. on a stable, level work surface capable of supporting the following weights: - i250 Scanner: 12.5 kg (27.5 lb.) - i260 Scanner: 13.9 kg (30.5 lb.) - i250 Scanner with optional flatbed accessory: 19.8 kg (43.5 lb.) - i260 Scanner with optional flatbed accessory: 21.2
ページ13に含まれる内容の要旨
Unpacking the Scanner The scanner box contains the following items: KODAK i200 Series Scanner Input tray Output tray Power supply Power cords (5) for U.S., U.K., Europe, Australia, Asia Installation CD Read Me Now sheet User’s Guide (printed English version; User’s Guide .pdf files in nine other languages are included on the Installation CD) Registration sheet Cleaning materials Calibration target pack NOTE: Save all packing materials for possible future use. Registering I
ページ14に含まれる内容の要旨
Removing the The scanner is packed with a foam sheet inside to protect the rollers during shipping. This foam sheet must be removed before you can begin scanning. Foam Sheet 1. Lift the scanner out of the box and place it on a stable, level work surface that is capable of supporting it. 2. Lift up the scanner door release to unlatch the scanner door. 3. Pull up to open the scanner door. 4. Remove the foam sheet. 5. Lower the scanner door and press it down firmly until it latches into place. Sc
ページ15に含まれる内容の要旨
Rear 1 Imprinter access door (for optional imprinter) 1 2 Imprinter access door handle 3 IEEE-1394 (FireWire) port 2 4 Power input 5 Output tray 6 Output tray extender 3 4 5 6 Side 1 Output tray extender 2 Output tray 3 Indicator lights 4 Input tray 5 Input tray extender 3 1 2 4 5 Internal 1 1 Separator module 2 Drive rollers 2 3 Channels for ink blotter strips (for optional imprinter) 4 Rear roller cover 3 5 Front roller cover 6 Feed module 4 5 6 10 A-61167 September 2002
ページ16に含まれる内容の要旨
Making Connections Follow the instructions for installing the IEEE-1394 (FireWire) card and the Kodak driver software before you plug the scanner into the host computer. IMPORTANT: You must install the software on the host computer before you install the scanner. Installing the IEEE-1394 An IEEE-1394 six-pin connector is provided on the rear panel of the scanner for IEEE-1394 (FireWire) connectivity. (FireWire) Card in the Host Computer 1. Install the IEEE-1394 (FireWire) card in the host co
ページ17に含まれる内容の要旨
Power Setup Several power cords are supplied with the scanner. Use only the cord required for your type of power. Dispose of the unneeded power cords properly. Use only the power supply that was provided with the scanner. CAUTION: The power supply must only be used indoors in a dry location. IMPORTANT: Do not substitute another power supply model or another manufacturer’s power supply. 1. Press the side labeled “O” on the power switch to make sure that the power is off. On/Off (I/O) switch NO
ページ18に含まれる内容の要旨
If you are installing the scanner on a computer that is running Windows 2000, the following screen appears. Select Yes. Kodak has successfully tested the i200 Series Scanners with Windows 2000. Your scanner is now installed. If you are installing the scanner on a computer that is running Windows XP, the following screen appears. Select Next. The following screen appears. A-61167 September 2002 13
ページ19に含まれる内容の要旨
Select Continue Anyway. Kodak has successfully tested the i200 Series Scanners with Windows XP. The following screen appears. Select Finish. Your scanner is now installed. 14 A-61167 September 2002
ページ20に含まれる内容の要旨
Input and Output Trays The input and output trays snap into place. They also may be adjusted to fit different document sizes. The input and output trays also may be folded flat up against the scanner to save space when the scanner is not in use. Output tray Document stops Input tray Attaching the Input Tray 1. Locate the input tray slots (large holes) on the scanner. 2. Align the input tray pins with the slots. 3. Press the input tray until it snaps into place. Attaching the Output Tray 1. Loc
