ページ1に含まれる内容の要旨
C150-E048-02EN
+ +
M3097E AND M3097G
IMAGE SCANNER
OPERATOR’S GUIDE
ページ2に含まれる内容の要旨
REVISION RECORD Edition Date published Revised contents 01 Jan., 1996 First eddition Specification No.: C150-E048-02EN This digital apparatus does not exceed the Class A limit for radio noise emissions from digital apparatus set out in the Radio interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’ément pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescridtes dans le Réglesment sur le b
ページ3に含まれる内容の要旨
IMPORTANT NOTE TO USERS READ CAREFULLY ALL OF THIS MANUAL BEFORE USING THIS PRODUCT. IF NOT USED CORRECTLY, UNEXPECTED DAMAGES MAY BE CAUSED TO THE USERS OR THE BYSTANDERS. Conventions for Alerts This manual uses the following coventions for alerts to prevent physical or property damages to users or bystanders. ! CAUTION indicates that either minor or moderate personal ! CAUTION injury may occur if the user does not perform the procedure cor- rectly. NOTICE indicates that inconvenience to the u
ページ4に含まれる内容の要旨
CONTENTS page CHAPTER 1 PREFACE .................................................................................................... 1-1 CHAPTER 2 COMPONENTS ........................................................................................... 2-1 2.1 Checking the Components........................................................................................... 2-1 2.2 Part Names and Functions ........................................................................................... 2-
ページ5に含まれる内容の要旨
CHAPTER 5 MAINTENANCE ......................................................................................... 5-1 5.1 Removing Jammed Documents ................................................................................... 5-1 5.2 Notes on Daily Use...................................................................................................... 5-2 5.3 Cleaning....................................................................................................................... 5-2 5
ページ6に含まれる内容の要旨
FIGURES page Figure 2.1 Received components ...................................................................................... 2-1 Figure 2.2 M3097E+/G+ parts names ............................................................................... 2-2 Figure 2.3 M3097E+ operator panel ................................................................................. 2-4 Figure 2.4 M3097G+ operator panel ................................................................................. 2-4 Figure
ページ7に含まれる内容の要旨
TABLES page Table 1.1 The differences between the M3097E+ and the M3097G+............................. 1-1 Table 6.1 Check items ..................................................................................................... 6-1 Table A.1 Installation specifications ................................................................................ A-1 Reader Comment Form vi
ページ8に含まれる内容の要旨
CHAPTER 1 PREFACE This manual describes how to operate the M3097E+ and M3097G+ image scanners. The M3097E+ now supports a document counter function. The M3097G+ similarly supports a new document counter and also features an 8-bit grayscale function. An image scanner optically reads image information from a document and outputs the information to the host system. The differences between the M3097E+ and the M3097G+ image scanners are listed in table 1.1. Table 1.1 The differences between the M
ページ9に含まれる内容の要旨
This page is intentionally left blank. 1–2
ページ10に含まれる内容の要旨
CHAPTER 2 COMPONENTS 2.1 Checking the Components 2.2 Part Names and Functions 2.3 Operator Panel Functions After unpacking image scanner, confirm that all the components have been received. This section describes the components of the image scanner and their functions. 2.1 Checking the Components These high precision components must be handled with care. Confirm that all the components shown in figure 2.1 have been received. If any component is missing, please contact your local Fujitsu sales
ページ11に含まれる内容の要旨
2.2 Part Names and Functions This section shows the exterior view of image scanner. This section also provides names of each part and describes their functions. 2.2.1 Exterior view of image scanner The image scanner can read a document of A3 or double-letter size at maximum. Document cover Automatic document feeder (ADF) Document holding pad Document bed Extension Operator panel Stacker Power switch ADF lever ADF paper chute Extension Interface connectors Power inlet Figure 2.2 M3097E+/G+ parts
ページ12に含まれる内容の要旨
2.2.2 Functions of each part Document cover: Closed over and holds a document to be read. Document bed: A document to be read is placed on the bed also called Flatbed (FB). Document holding pad: Presses a document to the document bed. Automatic document feeder (ADF): Automatically feeds documents to the reading position. Stacker: Stacks the read documents. Extension: Keeps the stacked documents from overhanging. Power switch: Turns the power on or off. Operator panel: Used to control image scann
ページ13に含まれる内容の要旨
⎧ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎨ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎩ 2.3 Operator Panel Functions The operator panel has indicators and a liquid crystal display screen for displaying image scanner status. The operator panel also has operation buttons. Liquid crystal display screen Buttons Mode 1 ADF Size Density Resolution Stop Power Ready Mode 2 Landscape Halftone Document Start Check Indicators Figure 2.3 M3097E+ operator panel Liquid crystal display screen Buttons Mode 1 Power Read Mode 2 Check Indicators Figure 2
ページ14に含まれる内容の要旨
2.3.1 Indicators The meaning of each indicator is as follows: Power indicator (Green): Lights to indicate the power is on. Ready (for reading) indicator (Green) (M3097E+): Lights when the image scanner becomes ready to read a docu- ment in the manual mode. This indicator turns off when the start button is pressed to read a document. Read (reading in progress) indicator (Green) (M3097G+): Lights to indicate reading is in progress. Check (device check) indicator (Yellow): Lights if a device error
ページ15に含まれる内容の要旨
Liquid crystal display screen The screen has two message lines. The current read mode status is displayed in the upper line, and messages and the modes set by the buttons are displayed in the lower line. Upper line A0 D F A4 4>0 L. Lower line Reading mode Display Size Display ⎧ Flatbed : FB ⎧ Double-letter size : DL ⎨ ⎩ Automatic document feeder : ADF ⎪ Letter size : LT ⎪ ⎨ Legal size : LG ⎪ A3 size : A3 ⎪ ⎩ A4 size : A4 Doument orientation Display ⎧ Portrait: : ⎨ ⎩ Landscape: : Density
ページ16に含まれる内容の要旨
The ADF, size, density, resolution, landscape, half-tone, document, and mode 1 and 2 buttons described below are effective unless other- wise specified by the host system. Automatic document feeder (ADF) button: Selects whether to feed documents automatically by ADF or manually on the flatbed. When this button is pressed, the lower line is displayed as shown in Screen 1. Each time this button is pressed, “FB” or “ADF” starts blinking in turn, and the read operation status displayed in the uppe
ページ17に含まれる内容の要旨
Density button: Selects a density for the read operation. When this button is pressed, the lower line is displayed as shown in Screen 3. Each time this switch is pressed, the blinking part in the lower line changes, and the density indicated on the upper line changes according to the blinking part. Screen 3 — The upper line shows a typical example. Upper line A D F LG 400 P.> Lower line D: e n. ATu(Ato )1 Blinking The lower line is displayed as shown below. (See the beginning of this section
ページ18に含まれる内容の要旨
Landscape button: Specifies whether reading is done in landscape or portrait mode. When this button is pressed, the lower line is displayed as shown in Screen 5. Each time this button is pressed, the blink- ing part changes in turn, and the mode indicated on the upper line changes accordingly. Screen 5 — The upper line shows a typical example. Upper line A D F LT 400 P.> Lower lineSL i z e :DLTT4LGA3A Blinking Explanation: Display : Landscape mode. This mode can be selected only if the docume
ページ19に含まれる内容の要旨
Document button: Selects the type of document. When this button is pressed, the lower line is displayed as shown in Screen 7. Each time this button is pressed, “LINE” or “PHOTO” starts blinking in turn, and the document selection indication displayed on the upper line changes accordingly. Screen 7 — The upper line shows a typical example. Upper line A D F LG 300HT1P.> Lower line D. O C.:L(L ine)P . ( Ph oto ) Blinking Explanation: Display (lower line) Explanation P.(Photo) : For light adjustme
ページ20に含まれる内容の要旨
2.3.3 Buttons and liquid crystal display screen (M3097G+) Liquid crystal display screen: Displays messages only. The mode buttons have the following functions: Mode 1 button: See Section 5.3.4, 5.4 and 5.5. Mode 2 button: See Section 5.3.4, 5.4 and 5.5. When error messages are displayed on liquid crystal display screen, press this button to enable the read operation. 2.3.4 Messages Error messages (temporary errors) If a temporary error occurs in the scanner, one of the following mes- sages is d
