ページ1に含まれる内容の要旨
C150-E103-01EN
M3097DG
Image Scanner
OEM Manual
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
REVISION RECORD Edition Date published Revised contents 01 Dec. 1997 First Edition Specification No.: C150-E103- 01EN The contents of this manual is subject to change without prior notice. All Rights Reserved, Copyright © 1997 FUJITSU LIMITED
ページ4に含まれる内容の要旨
This page is intentionally left blank.
ページ5に含まれる内容の要旨
CONTENTS Chapter 1 General.......................................................................................................... 1-1 1.1 General description ................................ ................................ ................................ ..................... 1-1 1.2 Appearance and parts name ................................ ................................ ................................ ......... 1-2 Chapter 2 Specificat i ons...........................................
ページ6に含まれる内容の要旨
4.1 Packaging box and storage condition ................................ ................................ ............................ 4-1 4.2 Components in the packaging box ................................ ................................ ................................ 4-2 4.3 Installation procedure ................................ ................................ ................................ .................. 4-2 4.3.1 Removing the carrier fixing bracket ...............................
ページ7に含まれる内容の要旨
A.4 Commands ................................ ................................ ................................ ................ Appendix A-20 A.4.1 RESERVE UNIT command ................................ ................................ ................ Appendix A-22 A.4.2 RELEASE UNIT command ................................ ................................ ................. Appendix A-24 A.4.3 INQUIRY command ................................ ................................ ....................
ページ8に含まれる内容の要旨
Appendix C Throughput................................................................................Appendix C-1 C.1 Offline test ................................ ................................ ................................ .................. Appendix C-1 C.2 Online test ................................ ................................ ................................ .................. Appendix C-1 iv
ページ9に含まれる内容の要旨
Chapter 1 General 1.1 General description M3097DG image scanner is an ideal input device for Electric filling systems, Facsimiles, optical character readers (OCR) , computer aided design (CAD) systems, and automatic publishing systems. M3097DG is basically the scanner which have the duplex scanning feature with the basis of M3097G+ and with the interface compatibility to M3097G+ and M3093DG. The features of the scanner are focused on as follows. (1) Duplex reading This scanner can read duplex d
ページ10に含まれる内容の要旨
General 1.2 Appearance and parts name Appearance and parts name is shown in Fig. 1.1. Figure 1.1 Part name of M3097DG 1- 2
ページ11に含まれる内容の要旨
Chapter 2 Specificat i ons 2.1 Basic specifications Basic specifications of M3097DG are shown in Table 2.1. Table 2.1 Basic Specifications of M3097DG Item M3097DG Remarks 1 Operating method Flatbed and ADF 2 Image sensor CCD 3 Light source Xe Discharge tube (green) 4 Document Minimum A6 size Maximum A3 or DL 5 Basic resolution 400 dpi 6 Output resolution 100/150/200/240/300/400/600 dpi See section 2. 3 7 Zooming of IPC option 50 to 800dpi 8 Scanning FB, A4,400 dpi 2.4 sec. speed FB, A4
ページ12に含まれる内容の要旨
Specifications 2.2 Option specifications Following options are available for this scanner. Table 2.2 Option of the scanner Name Parts Number When the option required? Remarks IPC-2D CA01952-0192 - When the image processing of Either IPC-2D or IPC-3D Section 3.3 required. can be installed at a time. IPC-3D CA02919-0511 Memory TBD - When reading 601 dpi or more One memory option can be installed per scanner. (See section 2.3) 16 Mbyte, 72 pin, EDO SIMM 60 ns, non-parity Figure 2.1 IPC-2D/3D o
ページ13に含まれる内容の要旨
2.3 Reading limitation depending on the memory installed 2.3 Reading limitation depending on the memory installed M3097DG have the limitation of reading depending on the memory installed as shown in Table 2.3 and 2.4. Table 2.3 The reading limitation of M3097DG without option Output Binary Grayscale resolution Simplex Duplex Simplex Duplex 100/150/200 dpi Supported (No additional memory) 300/400 dpi 600 dpi Not supported *2 Not supported *2 *2 Setting itself may be rejected. Table 2.4 T
ページ14に含まれる内容の要旨
Specifications 2.4 Physical specifications Table 2.5 Physical specifications No. Item M3097DE/DG 1 Dimensions Height 234 ( 9.2 in.) (mm) Width 696 (27.4 in.) Depth 497 (19.6 in.) 2 Weight (Kg) 20 ( 44.2 lb) 3 Power Voltage (V AC ) 100 to 120, 200 to 240 VAC ± 10% requirements Phase Si n gle Frequency 50/60 Hz +2% -4% 4 Power consumption (VA) 120 5 Heat capacity 78 kcal ( 312 BTU/H) 6 Surge current (A) 30 7 Momentary power failure 100 % 0.5 Hz 8 Leakage current ( mA) 0.75 or less 9 Dielec
ページ15に含まれる内容の要旨
2.6 Document specifications 2.6 Document specifications When using the flatbed, any condition of the paper can be read except paper size and ground color specification. 2.6.1 Paper size A B ↑ Feeding di
ページ16に含まれる内容の要旨
Specifications 2.6.2 Paper conditions 1) Paper type • Wood free paper • PPC paper, Specified by XEROX Corporation W hen using another paper, check that it is successfully fed by ADF before performing a scanning operation. 2) Paper weight 2 2 13.9 lbs (52g/ m ) to 27.8 lbs (104g/m ) 3) Items to avoid • The following documents may be hard to read by ADF. Before you start the large quantity reading, check that the document is read appropriately. If the ADF reading is not appropriate, read them by
ページ17に含まれる内容の要旨
2.6 Document specifications Replacement of parts: The life of the pad and the pick roller may be shorter than the case that PPC document is fed. Replacement cycle of the pad and the pick roller may be around 100,000 sheets depending on the paper quality and cleaning cycle. Note 3: Paper should be straightened to fit the condition below. 2-7
ページ18に含まれる内容の要旨
Specifications 2.6.3 ADF capacity The number of pages that can be loaded into ADF chute depends on the paper size and ream weight. This information is shown in the following Figure: 52 64 81 104 127 2 g/m Figure 2.4 ADF capacity Paper weight conversion table Country Unit Conversion Japan Kg/ream 45 55 64.6 77.5 90 109.8 135 USA lb 13.9 17 20 24 27.9 34 41.8 2 Europe g/m 52 64 75 90 104 127 157 2-8
ページ19に含まれる内容の要旨
2.6 Document specifications 2.6.4 Areas that must not be perforated (for ADF reading only) Perforations in the shaded areas may cause Jam error. If you must read data from such paper, use the flatbed Figure 2.5 Areas that must not be perforated 2-9
ページ20に含まれる内容の要旨
Specifications 2.6.5 Grounding color area The color of the shaded area shown in Figure 2. 6 should be paper grounding color (white) or drop- out color. If not, set White level following OFF (Photograph) before reading . Figure 2.6 Grounding color area 2-10
