ページ1に含まれる内容の要旨
C150-E009-07EN
M3096EX AND M3096GX
IMAGE SCANNER
OPERATOR’S GUIDE
ページ2に含まれる内容の要旨
REVISION RECORD Edition Date published Revised contents 01 June, 1994 First edition 02 August, 1994 Contents revised 03 Janualy, 1995 Contents revised 04 April, 1995 Pick Roller replacement procedure added 05 September, 1995 Pad replacement procedure added 06 January, 1996 Appendix C, Declaration of Conformity added 07 August, 1996 Declaration of Conformity revised Specification No.: C150-E009-07EN This digital apparatus does not exceed the Class A limit for radio noise emissions from digital a
ページ3に含まれる内容の要旨
Conventions Special information, such as warnings, cautions are indicated as follows: WARNING A WARNING indicates that personal injury may result if you do not follow a procedure correctly. CAUTION A CAUTION indicates that damage to the scanner may result if you do not follow a procedure correctly. NOTICE A NOTICE provides “how-to” tips or suggestions to help you perform a procedure correctly. NOTEs are particularly useful for first-time users. ii
ページ4に含まれる内容の要旨
CONTENTS page CHAPTER 1 PREFACE .....................................................................................................1-1 CHAPTER 2 COMPONENTS ............................................................................................2-1 2.1 Checking the Components ..........................................................................................2-1 2.2 Part Names and Functions............................................................................................2-
ページ5に含まれる内容の要旨
CHAPTER 5 MAINTENANCE ..........................................................................................5-1 5.1 Removing Jammed Documents ...................................................................................5-1 5.2 Notes on Daily Use ......................................................................................................5-2 5.3 Cleaning .......................................................................................................................5-2 5
ページ6に含まれる内容の要旨
FIGURES page 2.1 Received components ..................................................................................................2-1 2.2 M3096EX/GX parts names ..........................................................................................2-2 2.3 M3096EX/GX Indication panel ...................................................................................2-4 2.4 M3096EX (LCD model) operator panel ......................................................................2-4 3.1 SCSI
ページ7に含まれる内容の要旨
TABLES page 1.1 The differences between the M3096EX and the M3096GX........................................1-1 3.1 SCSI-ID setting ............................................................................................................3-6 6.1 Check items ..................................................................................................................6-1 A.1 Installation specifications ...........................................................................................
ページ8に含まれる内容の要旨
CHAPTER 1 PREFACE This manual describes how to operate the M3096EX and M3096GX image scanners. An image scanner optically reads image information from a document and outputs the information to the host system. The differences between the M3096EX and the M3096GX image scanners are listed in table 1.1. Table 1.1 The differences between the M3096EX and the M3096GX Model number Interface Shipping Image size Automatic models document feeder M3096EX RS232C North America A3 size or Yes ⎛LCD model ⎞ +
ページ9に含まれる内容の要旨
This page is intentionally left blank. 1 – 2
ページ10に含まれる内容の要旨
CHAPTER 2 COMPONENTS 2.1 Checking the Components 2.2 Part Names and Functions 2.3 Indication Panel Functions 2.4 Operator Panel Functions After unpacking image scanner, confirm that all the components have been received. This section describes the components of the image scanner and their functions. 2.1 Checking the Components These high precision components must be handled with care. Confirm that all the components shown in figure 2.1 have been received. If any component is missing, please c
ページ11に含まれる内容の要旨
2.2 Part Names and Functions This section shows the exterior view of image scanner. This section also provides names of each part and describes their functions. 2.2.1 Exterior view of image scanner The image scanner can read a document of A3 or double-letter size at maximum. Document cover Automatic document feeder (ADF) Document holding pad Document bed Extension Indication panel (Standerd model) Stacker Operator panel (LCD model) ADF lever ADF paper chute Extension Power switch Third party sl
ページ12に含まれる内容の要旨
2.2.2 Functions of each part Document cover: Closed over and holds a document to be read. Document bed: A document to be read is placed on the bed also called Flatbed (FB). Document holding pad: Presses a document to the document bed. Automatic document feeder (ADF): Automatically feeds documents to the reading position. Stacker: Stacks the read documents. Extension: Keeps the stacked documents from overhanging. Power switch: Turns the power on or off. Indication panel: The indication panel indi
ページ13に含まれる内容の要旨
⎧ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎨ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎪ ⎩ 2.3 Indication Panel Functions (standard model) Power Read Check Indicators Figure 2.3 M3096EX/GX Indication panel 2.3.1 Indicators The meaning of each indicator is as follows: Power indicator (Green): Lights to indicate the power is on. Read (reading in progress) indicator (Green) : Lights to indicate reading is in progress. Check (device check) indicator (Yellow): Lights if a device error occurs which may result in a service call. This indicator b
ページ14に含まれる内容の要旨
2.4.1 Indicators The meaning of each indicator is as follows: Power indicator (Green): Lights to indicate the power is on. Read indicator (Green) : In manual mode, when this lamp is lit, it indicates that the start switch is enabled. Check (device check) indicator (Yellow): Lights if a device error occurs which may result in a service call. This indicator blinks if a document is jammed in the automatic document feeder. This indicator turns off when the jammed documents are removed from the fee
ページ15に含まれる内容の要旨
2.4.3 Liquid crystal display screen The screen has two message lines. The current read mode status is displayed in the upper line, and messages and the modes set by the buttons are displayed in the lower line. Upper line A0 D F A 4 4> 0 L . Lower line Reading mode Display Size Display ⎧ Flatbed : FB : DL ⎧ Double-letter size ⎨ ⎩ Automatic document feeder : ADF ⎪ : LT Letter size ⎪ : LG ⎨ Legal size ⎪ : A3 A3 size ⎪ : A4 ⎩ A4 size Doument orientation Display Portrait: : ⎧ ⎨ Landscape: : ⎩
ページ16に含まれる内容の要旨
The ADF, size, density, resolution, landscape, half-tone, document, and mode 1 and 2 buttons described below are effective unless other- wise specified by the host system. Automatic document feeder (ADF) button: Selects whether to feed documents automatically by ADF or manually on the flatbed. When this button is pressed, the lower line is displayed as shown in Screen 1. Each time this button is pressed, “FB” or “ADF” starts blinking in turn, and the read operation status displayed in the uppe
ページ17に含まれる内容の要旨
Density button: Selects a density for the read operation. When this button is pressed, the lower line is displayed as shown in Screen 3. Each time this switch is pressed, the blinking part in the lower line changes, and the density indicated on the upper line changes according to the blinking part. Screen 3 — The upper line shows a typical example. Upper line A D F L G 4 0 0 P . > Lower line D: e n . ATu ( A t o )1 Blinking The lower line is displayed as shown below. (See the beginning of thi
ページ18に含まれる内容の要旨
Landscape button: Specifies whether reading is done in landscape or portrait mode. When this button is pressed, the lower line is displayed as shown in Screen 5. Each time this button is pressed, the blink- ing part changes in turn, and the mode indicated on the upper line changes accordingly. Screen 5 — The upper line shows a typical example. Upper line A D F L T 4 0 0 P . > Lower lineSL i z e : D L TT4 L G A 3 A Blinking Explanation: Display : Landscape mode. This mode can be selected only
ページ19に含まれる内容の要旨
Document button: Selects the type of document. When this button is pressed, the lower line is displayed as shown in Screen 7. Each time this button is pressed, “LINE” or “PHOTO” starts blinking in turn, and the document selection indication displayed on the upper line changes accordingly. Screen 7 — The upper line shows a typical example. Upper line A D F L G 3 0 0 H T 1 P . > Lower lineD. O C . : L ( L i n e ) P . ( Ph oto ) Blinking Explanation: Display (lower line) Explanation P.(Photo) : F
ページ20に含まれる内容の要旨
2.4.4 Messages Error messages (temporary errors) If a temporary error occurs in the scanner, one of the following mes- sages is displayed. Pp a p ery E m t This message is displayed if there is no more paper on the ADF paper chute during a read operation in ADF mode. Fill the ADF paper chute with paper. To enable the read operation, press the stop button. Pa a pem r J This message is displayed if a document is jammed in the ADF. See section 5.1 for removing jammed documents. AoDO F – Cvn