ページ1に含まれる内容の要旨
P3PC-2242-04EN
fi-6670/fi-6770/fi-6750S
Thank you for purchasing a fi-6670 / fi-6770 / fi-6750S Color Scanner series.
This Getting Started is the startup guide that summarizes the preparatory
actions needed before use. Be sure to thoroughly read this manual before you
start using the scanner.
Contents
Introduction....................................................................2
Regulatory Information .................................................3
Conventions...........................
ページ2に含まれる内容の要旨
Manual Description Introduction Kofax VRS Instal- Explains about the precautions for lation Guide (PDF) installing Kofax VRS and other features Thank you for purchasing our fi-6670/fi-6770/fi-6750S series (*1) such as the VRS Professional features. Color Image Scanner. Included in the Setup DVD-ROM. Scanner Central Explains about the overview, installa- Scanner Models Admin 4.2 User's tion, operation and maintenance of Guide (PDF) Scanner Central Admin. Included in the This manual covers t
ページ3に含まれる内容の要旨
® Regulatory Information ENERGY STAR PFU LIMITED, a Fujitsu company, has deter- mined that this product meets the ENERGY FCC Declaration ® STAR guidelines for energy efficiency. This equipment has been tested and found to comply with the ® ENERGY STAR is a registered trademark limits for a Class B digital device, pursuant to Part 15 of the of the United States. FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion.
ページ4に含まれる内容の要旨
■ Operating Systems and Software Products Screen Examples in This Manual The OSs and products in this manual are indicated as The screen examples in this manual are subject to change follows: without notice in the interest of product improvement. If the actual displayed screen differs from the screen examples Product Indication in this manual, operate by following the actual displayed ® Windows Windows Windows 2000 Professional screen while referring to the user's manual of the scanner 1
ページ5に含まれる内容の要旨
Warning Label Safety Information Warning Indications Used In This Manual The following indications are used in this manual to obviate any change of accident or damage to you and/or the equip- ment. This indication alerts operators to an operation that, if not strictly observed, may result in severe injury or death. HOT warning label: This indication alerts operators to an The glass surface inside the ADF becomes hot during the operation. Be careful not to touch glass operation that, if not
ページ6に含まれる内容の要旨
Make sure to ground the scanner. Do not put liquids inside the scanner. Make sure to ground to avoid electric shock. Be Do not insert or drop any metal objects into the ADF slot or ventilation ports on the scanner. sure to ground before plugging into a Power Do not scan any wet documents or documents outlet. with paper clips or staples attached. Unplug from the outlet before removing the Do not splash or allow the scanner to get wet. ground connection. If foreign objects (water, small meta
ページ7に含まれる内容の要旨
Avoid any contact when scanner is in use. Avoid getting a sleeve, necktie, or hair caught The following are important cautions described in this manual up in any scanner mechanism during scanning since this may cause injuries. Do not install the scanner on an Disconnect the power plug from the unstable work table. When installing the scanner on a work table, Power outlet when the scanner is not make sure that the table is flat and level. Place in use for a long period of time. the scanner
ページ8に含まれる内容の要旨
1 Preparation Contents of the Scanner Package When you unpack the scanner package, make sure that all of the following parts are included in the package. Make sure the scanner package contains all the parts listed in the package contents list that is included in the package box. If any parts are missing or defective, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Scanner (x1) ADF paper chute (x1) Stacker (x1) AC cable (The contents may vary depending o
ページ9に含まれる内容の要旨
Part Names and Functions This section describes the scanner parts and their functions. For information on the function of each part, refer to “Section 1.2 Scanner Parts and Their Functions” in the Operator’s Guide. ■ fi-6670 (ADF type) Chute Roller Cover ADF (automatic document feeder) ADF Paper Chute Stacker Paper Chute Extension Stacker Extension Side Guide Stopper Side Guide Button EXT Connector Operator Panel fi-6670 ADF Open Button SCSI ID Switch Power Connector Ventilation Main Power S
ページ10に含まれる内容の要旨
■ fi-6770/fi-6750S (Flatbed type) Chute Roller Cover ADF (automatic document feeder) ADF Paper Chute Stacker Paper Chute Stacker Extension Extension Side Guide Stopper Side Guide Button Operator Panel Flatbed Transport Lock Document Cover ADF Lock Screw Handle Document Holding Pad Lock Screw Storage Hole Document Bed ADF Open Button fi-6770 SCSI ID Switch CGA Board Slot SCSI Connector USB Connector fi-6750S Ventilation Port Power Connector Main Power Switch USB Connector 10
ページ11に含まれる内容の要旨
■ Model-Common Parts Brake Roller (x1) (consumable) Pick Arm (x1) Brake Roller Holder (x1) Ultrasonic Sensor (x2) Feed Roller (x4) (for multifile detection) Plastic Roller (x4) Chute Roller (x1) (Usually covered with a hood) Glass (x2) Pick Roller Cover (x1) Sheet Guide (x2) Pick Roller (1 x 2 types) (consumable) Functions of the Operator Panel The Operator Panel is comprised of a Function Number Display, buttons, and LEDs, which are used to operate the scanner and to check the scanner status.
ページ12に含まれる内容の要旨
■ Flatbed type Check Check LED Function Number Display Function [Function] button Send to [Send to] button Scan / Stop [Scan/Stop] button Power [Power] button/Power LED Name Description Check LED Lights (in orange) when an error occurs. Function Number Display Indicates the scanner status. [Function] button Switches the function activated by the [Send to] button. Launches linked application software for scanning. [Send to] button Resets an error indication. Launches linked application software f
ページ13に含まれる内容の要旨
2 Installing the Scanner The following describes how to install the scanner. 1 Place the scanner at its installation site. The outer dimensions and the spaces required for installing the respective scanner types are as follows: (Unit: mm/inches) ADF type Flatbed type 640 (25.1) 390 (15.3) 300 (11.8) 342 700 500 (13.4) (19.6) (27.5) 432 (17.0) 686 329 690 (27.1) (27.0) (13.0) 1179 1030 (40.5) (46.4) Outer dimensions Installation space 2 Unlock the Transport Lock (Flatbed type only). Using a coin
ページ14に含まれる内容の要旨
3) Gently close the Document Cover. 4) Change the position of the ADF. � Be careful not to pinch your fingers when moving the ADF. � Never rotate the ADF by more than 180 degree. Doing so may damage the ADF. The ADF can be set to any of the following three positions: After repositioning the ADF, be sure that the ADF is firmly locked to the new position. ■ Traditional (Factory default) ■ Standard (Space-saving type and for right-handed operators) Slide the ADF toward the center of the scanner. N
ページ15に含まれる内容の要旨
3 Connecting the Cables The following describes how to connect the cables between the scanner and your computer. The type of the connector for the cable depends on the scanner model you use. Confirm the scanner model and use the correct cable. ADF type fi-6670 3 USB or SCSI connection 2 5 SCSI ID SCSI cable 1 USB cable 4 Flatbed type fi-6770 3 USB or SCSI connection fi-6750S USB connection SCSI ID 4 USB cable 1 SCSI cable 15
ページ16に含まれる内容の要旨
1 Make sure that the computer is turned OFF. 2 Open the Cable Cover (ADF type only). 3 Connect the scanner to your computer either with a USB or SCSI cable. � You cannot make both USB and SCSI cable connections at the same time. � You cannot connect multiple computers to the scanner at the same time. � Turn off the scanner and your computer first when you switch the interface cable. The following describes the requirements for connecting with the respective cables. ■ USB cable � Be sure to use
ページ17に含まれる内容の要旨
4 Installing the Scanner Software Brief Information on the Bundled Software To scan documents with this scanner, you must install a scanner driver for operating the scanner as well as scanning software (hereinafter called the "application") for launching the driver and performing a scan. The scanner drivers and applications provided with the scanner are as follows: ■TWAIN Driver Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN-compliant applications. ■ISIS Driver
ページ18に含まれる内容の要旨
TM ■QuickScan Pro (trial) [QuickScan Pro (Trial)] (*1) TM Conforms to the ISIS standard. By using the ISIS scanner driver together with QuickScan Pro , TM you can read scanned documents and create their images. This bundled QuickScan Pro is a trial version, and can be executed 30 times before it is disabled. You will need to purchase the full product version if you wish to continue using it. ■Manuals Includes Getting Started, and Operator's Guide. ■Scanner Central Admin Agent Used to centrali
ページ19に含まれる内容の要旨
*1: Kofax VRS supports the following Windows Vista versions: - Windows Vista Business - Windows Vista Enterprise - Windows Vista Ultimate Kofax VRS supports the following versions of Windows 7: - Windows 7 Professional - Windows 7 Enterprise *2: Does not support the Windows 64-bit versions. *3: ScandAll PRO, ScandAll PRO ScanSnap mode Add-in, Scan to Microsoft SharePoint, and ABBYY FineReader for ScanSnap™ support the following versions of Windows Server 2003: - Windows Server 2003 R2, Standard
ページ20に含まれる内容の要旨
If an old version of the software is installed already, uninstall it first. For how to uninstall each of the software, refer to “Appendix 5 Uninstalling the Software” in the Opera- tor’s Guide. The following describes how to install the software. 1 Confirm that the scanner is not turned ON. 2 Turn on your computer and log onto Windows. Be sure to log on as a user with "Administrator" privileges. 3 Insert the Setup DVD-ROM into your disk drive. The [FUJITSU Image Scanner Setup] screen appears. I
