ページ1に含まれる内容の要旨
for use with EPSON Scanners
B813021/B813022
Transparency Unit
ページ2に含まれる内容の要旨
This transparency unit is a high-quality device developed to enable Epson Scanner owners to scan transparencies and slides. By installing this unit on your Epson scanner, you can scan transparencies and slides beautifully, in full color. Also, it is not necessary to remove this unit if you wish to return to scanning normal reflective (paper) documents. Unpacking the Unit When you first open the package, make sure that all the following items are included and that none has been damaged during shi
ページ3に含まれる内容の要旨
Removing the Shipping Screw To prevent damage during shipping a shipping screw is attached to the transparency unit. Make sure this screw is removed according to the following steps before you attempt to use this unit. 1. Turn the unit so the glass side faces up. 2. Remove the screw from the position shown below. 3. Insert the screw you just removed into the storage-hole in the position shown. 3
ページ4に含まれる内容の要旨
Keep the shipping screw in a safe place; you will need it if Note: l you should need to transport the scanner. When transporting the scanner, you should remove the transparency unit and reattach the shipping screw. l If the unit’s lamp assembly is not in its initial position, you cannot attach the shipping screw. If this happens, reattach the unit to the scanner, close the unit, and turn the scanner on; the unit’s lamp assembly then returns to its initial position. Then turn off the scanner and
ページ5に含まれる内容の要旨
4. Use a coin to tighten the two screws and secure the transparency unit. 5. Close the transparency unit. 6. Connect the transparency unit’s connector to the option connector on the scanner. 5
ページ6に含まれる内容の要旨
Transparency Document Guide and Reflective Document Mat A transparency document guide and reflective document mat are included with this unit. Use as necessary. Positioning Transparencies You can scan the transparency types shown below: Document type Transparency documents (including slide film) in color or monochrome Scanning size Up to 5 x 5 inches (127 x 127 mm) Note: l Wipe the glass of the transparency unit, the scanner’s document table, and the narrow window near the mounting bracket befor
ページ7に含まれる内容の要旨
Position transparency documents according to the steps below. 1. Open the transparency unit. 2. Place the transparency document guide on the scanner’s document table. 3. Using the transparency document guide, place the transparency document face down on the scanners glass document table. Align the transparency document with the upper right-hand corner of the transparency document guide. 4. Close the unit. If the reflective document mat is in place, remove it from the transparency unit. Note: Mak
ページ8に含まれる内容の要旨
Scanning Normal (Reflective) Documents When you return to scanning normal reflective documents, you should always insert the reflective document mat included with this unit. Also, make sure you remove the transparency document guide from the scanners document table. Insert the reflective document mat as described below. 1. Open the transparency unit. 2. Insert the reflective document mat. 3. Position the reflective document and close the unit. To remove the reflective document mat, lift up on th
